• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.16 no.4
• /
• pp.133-140
• /
• 2006

The growth characteristics and properties of large size $SrAlF_5$ single crystals are described and compared with those of $BaMgF_4$. Transmission spectra in the vacuum ultraviolet wavelength region indicate a high transparency of $SrAlF_5$ (about 90% without considering surface reflection loses) down to 150 nm, on contrast to the optical loses observed for $BaMgF_4$. The ferroelectric character of $SrAlF_5$ is evidenced by the reversal of the spontaneous polarization in a hysteresis loop. The higher potential of $SrAlF_5$ in comparison with $BaMgF_4$ for the realization of all-solid-state lasers in the ultraviolet wavelength region by the quasi-phase matching (QPM) technique is pointed out. $SrAlF_5$, besides a higher grade of transparency, shows a nonlinear effective coefficient similar to that of quartz and uniaxial nature, on contrast to the one order smaller nonlinear coefficient and biaxial character of $BaMgF_4$. The refractive index of $SrAlF_5$ from the ultraviolet to the near-infrared wavelength region is measured by the minimum deviation method. The Sellmeier and Cauchy coefficients are obtained from the fits to the curves of the ordinary and extraordinary refractive indices, and the grating period for the first order QPM is estimated as a function of the wavelength. The poling periodicity for 193 nm SHG from 386 nm is $4{\mu}m$.

• Transactions of Materials Processing
• /
• v.7 no.5
• /
• pp.459-464
• /
• 1998

Effect of the several initial textures such as random texture, rolling texture and cube texture, on the plane strain stretching was studied by interpretation of the finite element method. The calculation of yield locus indicated that the sheet oriented in the cube texture exhibits easy yielding on uniaxial stress state whereas the sheet having either a random or the rolling texture exhibits easy yielding on shear deformation. Upon stretching tests, the thickness strain at the center region contacting the punch was identical regardless of the initial textures while the dependence of the thickness strain on the initial texture was found in the other regions. In general punch loads required or the sheet with an initial cube texture was as expected from calculated yield locus, lower than those for the others.

• Electrical & Electronic Materials
• /
• v.8 no.4
• /
• pp.443-450
• /
• 1995

A directional coupler which on the X-cut $LiNbO_3$ substrate is fabricated by using proton exchange method and self-aligned method. After proton exchange process, the waveguide is formed by annealing process. The relation ship between refractive index change of waveguide and maximum output was studied along with the annealing time. A self-aligned method was used to simplify the fabrication process of the waveguide and to maximize the efficiency of electric field. The on-off state of modulator has been observered with the switching of the directional coupler by the electric field effect and also the switching voltage of the directional coupler has been measured with 8.0 [V].

• Electrical & Electronic Materials
• /
• v.9 no.6
• /
• pp.584-592
• /
• 1996

Coupling optical modulator which on the $LiTaO_3$ substrate is fabricated by using proton exchange method and self-aligned method. Proton exchange of proton diffusion method was applied to pattern a waveguide on $LiTaO_3$ substrate. The annealing at >$400^{\circ}C$ was carded out to control waveguide width and depth. The depths of the two annealed optical waveguides, which were measured by using .alpha.-step, were 1.435 K.angs. and 1.380 K.angs. Using .alpha.-step facility, we examined that the width of waveguides is increased from 5.mu.m to 6.45 .mu.m and 6.3.mu.m due to the annealing effects. The process of proton exchange was done at 150.deg. C for 120 min, >$200^{\circ}C$ for 60 min and annealing process was done at >$400^{\circ}C$ for 90 min, >$400^{\circ}C$ for 60 min. The high speed coupling optical modulator has very good figures of merits; the measured high frequency power were achieved.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.20 no.5
• /
• pp.1516-1523
• /
• 1996

The present study is concerned with the development of anisotropy and deformation texture in polycrystals. The individual grain in an aggregate is assumed to experience the viscoplastic dedformation with crystallographic slip that unsure uniquenessof the active slip systems and shearing rate onthese systems. Two different methods for updating the grain orientation are examined. Texture development for some deformation modes such as plane strain compression, uniaxial tension and simple shear are found. Changes in anisotropic flow potential due to texture development during large deformation are also given. Anisotropic behavior of polycrystals with defferent textures are examined.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.28 no.8
• /
• pp.1-5
• /
• 2014

Conoscopic holography, which consists of two circular polarizers and an uniaxial crystal, is incoherent holographic technology for three-dimensional display and non-contact diagnosis. In this paper, we derive the longitudinal and lateral intensities from point-source hologram made by conoscopic holography. Also, the longitudinal and lateral resolutions of conoscopic holography will be obtained from the longitudinal and lateral intensities, respectively, according to Rayleigh criterion.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.14 no.1
• /
• pp.86-91
• /
• 2006

Magnesium alloys have been widely used for many structural components of automobiles and aircraft because of high specific strength and good castability in spite of hexgonal closed-packed crystal structure of pure magnesium. In this paper, FE analysis was executed about the formability of AZ3l magnesium alloy on press forging process. For this, the variation of sheet temperature, distribution of punch force and the effect of heat transfer and friction between punch and sheet on the forming characteristics during press forging of AZ31 has been analyzed by finite element analysis. In order to obtain temperature dependence of material characteristics, uniaxial tension tests at elevated temperature were done under temperature of $100^{\circ}C\~ 500^{\circ}C$.

• Proceedings of the Optical Society of Korea Conference
• /
• 2000.08a
• /
• pp.92-93
• /
• 2000

1961년에 비선형 광학이 시작된$^{(1)}$ 이후로 비선형 광학의 큰 응용 잠재성 때문에 많은 비선형 광학 결정이 개발되어 왔고, 현재도 많은 연구실에서 제조 및 연구되고 있다. 일단 결정이 만들어지면 결정축(X,Y,Z축)이 파악되어야 모든 연구나 응용이 가능하다. 이러한 결정축의 측정은 X선, 중성자, 또는 전자를 이용하는 회절 방법을 통하여 가능하며, 이 중 X선회절 장비가 가장 많이 쓰인다.$^{(2 4)}$ 그러나 이러한 장비들은 값이 워낙 비싸서, 결정축 측정외에 그다지 쓸모가 없는 비선형 광학 물질 제조 연구실이나 광학 연구실에서는 이 장비를 구입하기가 다소 어려운 것이 현실이다. 더구나 이 방법은 해석이 복잡하다는 단점이 있다. (중략)

• Journal of the Korean Society for Heat Treatment
• /
• v.32 no.1
• /
• pp.1-11
• /
• 2019

In this study, microstructure evolution and crystallographic orientation are investigated under various deformation conditions in M1 magnesium alloy. M1 magnesium ingot was rolled at 673 K with the rolling reduction of 30%. The compression test specimens were machined out from rolled plate, and then the specimens were annealed at 823 K for 1h. Uniaxial compression tests were conducted at 723 K and under the strain rate ranging from $5.0{\times}10^{-4}s^{-1}$ to $5.0{\times}10^{-2}s^{-1}$ up to a true strain of -1.0. For observation of crystal orientation distribution, EBSD measurement was performed. Occurrence of the dynamic recrystallization and grain boundary migration were confirmed in all case of the specimens. The distribution of the grains is not uniformed in the experimental conditions.

• Current Optics and Photonics
• /
• v.5 no.3
• /
• pp.261-269
• /
• 2021

Binary-phase complex spatial light modulators (BP-C-SLMs) are proposed and simulated. This study shows that bottom-top mirror-symmetrical uniaxial systems between two orthogonal polarizers allow one to construct BP-C-SLMs. BP-C-SLMs double the information-handling capacity per pixel, compared to the conventional amplitude-only spatial light modulators (A-SLMs), as well as being simply implemented with a single spatial light modulator (SLM), rather than a combination of an A-SLM and a binary-phase SLMs. Under limited conditions, BP-C-SLMs can control only the amplitude in single-phase space, and act as A-SLMs.