• 전기학회논문지
• /
• 제57권2호
• /
• pp.307-313
• /
• 2008

In this paper, we propose a novel defects inspection algorithm for TFT-LCD panels. We first compensate the distorted image caused by the camera distortion and the uneven illumination environment using the least squares method and the bezier surface. We find a starting point of each pattern for restricting each pattern. A clean image is compared to each pattern to find defects using modified PCSR-G algorithm. The simulation example shows that our algorithm not only inspects the defects well, but also is robust to the 1-pixel error.

• 한국의류산업학회지
• /
• 제7권3호
• /
• pp.333-338
• /
• 2005

We examined the antimicrobial effects of the cotton fabrics which were laundered at different conditions and treated with a colloidal silver solution using Staphylococcus aureus. Colloidal silver solution was made from commercial colloidal silver generator by electrolysis. The fabric which was innoculated and washed with water before drying had no more Staphylococcus aureus, but which was innoculated and dried before washing with detergent solution had lower reduction rate. The fabric washed with oxygen bleach did not have an antimicrobial effect, but rinsed with 0.07% fabric softener showed antimicrobial properties. The fabric rinsed with 0.7ppm colloidal silver solution had better antimicrobial effects. As the treating concentration of silver solution increased, the antimicrobial property of the fabric was increased. The fabric treated with 5% silver solution sustained reflectance and whiteness of untreated fabric. The colloidal silver treated fabric lost antimicrobial property after washing because nano-sized silver particles were located on uneven fiber surface without chemical bonding forces.

• Journal of Microbiology and Biotechnology
• /
• 제18권1호
• /
• pp.104-106
• /
• 2008

Enterobacter sp. BL-2 excretively produced a unique cationic polyglucosamine biopolymer PGB-1 comprised of more than 95% D-glucosamine in an acetate-mediated culture condition. The excretion of the biopolymer PGB-1 was closely associated with the cellular morphology of Enterobacter sp. BL-2, a feature highly dependable on the pH of the medium. The initially formed uneven and irregular surface cells were aggregated into the cell-biopolymer network structure connected by the adhesion modules of the cell-bound biopolymer. The excretive production of the biopolymer PGB-1 coincided with the disruption of the cell-biopolymer network, most actively at the medium pH of 8.0.

• Tribology and Lubricants
• /
• 제15권2호
• /
• pp.199-205
• /
• 1999

Using a coupled thermal-mechanical analysis, the thermal distortion of the ventilated disk brakes has been investigated based on the air cooling effects during 15 braking operations. The FEM results show that the bendings and distortions of the disk toward the left side are decreased, but the sinusoidal distortion of the disk rubbing surface along the arc length of the vent hole is highly increased by increasing the convective air cooling effects, which is heavily related to the squeal, wear and micro-thermal crackings at the rubbing surfaces due to uneven dissipation rates of friction heatings.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2004년도 유체기계 연구개발 발표회 논문집
• /
• pp.567-571
• /
• 2004

The 2-dimensional unsteady flows on and around the cambered airfoils were computed by applying LES with the deductive dynamic SGS model. The unsteady flow field were used as inputs to compute the far-field sounds and directivity patterns from rotating blades by a hybrid approach that exploits Farassat's formula. The BEM (Boundary Element Method) was applied to predict the frequency characteristics from the rotating blades for the cases of even- and uneven-pitched fans. The BEM results suggested that the unevenly pitched fan have less pronounced discrete peaks at BEF frequencies, which was confirmed by the experiment.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.149-150
• /
• 2007

In this paper, we propose a novel defects inspection algorithm for TFT-LCD panels. We first compensate the distorted image caused by the camera distortion and the uneven illumination environment using the least squares method and the bezier surface. We find a starting point of each pattern. The reference frame, made by subtract method using several clean patterns, is compared to each pattern to find defects. The simulation example shows that our algorithm not only inspects the defects well, but also is robust to the 1-pixel error.

• 대한기계학회논문집A
• /
• 제33권7호
• /
• pp.700-705
• /
• 2009

In order to enhance the dynamic stiffness of automotive panel, effect of bead and curved surface was investigated. Modal test was performed for principle specimens which have various kinds of beads, holes and curved surfaces. Test was also performed for conventional dash panel assembly and rear floor panel assembly and curved shaped ones. Results showed that curved shape increased the natural frequency of automotive panel more effectively than the bead. Finite element analysis was also performed and yielded good match with the test results.

• International Journal of Railway
• /
• 제9권1호
• /
• pp.15-20
• /
• 2016

An approach section on an abutment is located between the soil embankment and the structure, which may cause an uneven surface due to different settlement between the abutment and the soil embankment. This study proposes a new type of wall which separates the abutment from the backfill material using mechanically stabilized wall. A new type of keystone which incorporates geotube and wire mesh is proposed and evaluated. Numerical analyses were performed to investigate the applicability of the proposed keystone type, which incorporates Geosynthetic. The maximum horizontal displacements along GRS wall faces, settlements at the top of pavement and track bed, and tensile forces applied on geotextiles under traffic loads were investigated. The results of the numerical analysis showed that the proposed wall can be used for highway and high-speed railway abutment.

• 대한기계학회논문집A
• /
• 제37권8호
• /
• pp.1051-1057
• /
• 2013

본 연구에서는 광학적 방법으로 곡면변형률을 측정하고자 할 때, 소재 표면이 임의의 곡면이거나 요철이 많은 경우, 부식이나 오염으로 표면이 불량한 경우, 그리고 고무나 폼, 생체 조직 등과 같이 규칙적인 격자망을 인쇄하기 어려운 경우에도 적용할 수 있는 자동 곡면변형률 측정시스템 'ASIAS-bio'를 개발하였다. 이 시스템은 시편의 재질과 표면상태, 격자 패턴과 크기, 격자 마킹 방법, 변형 정도 등 측정 조건에 관계없이 사용이 가능한 것이 특징이다. 우선 그 신뢰성을 평가하기 위하여 금속판재 성형제품의 변형률 분포를 상용 장비로 측정한 결과와 비교하였다. 또한, 돼지 어깨 관절막, 인체 무릎 피부 등 연질 생체 조직의 변형 측정에 적용함으로써 본 시스템의 유용성을 확인하였다.

• Journal of Mechanical Science and Technology
• /
• 제19권4호
• /
• pp.1044-1051
• /
• 2005

The isothermal characteristics of a rectangular parallelepiped sodium heat pipe were inves­tigated for high-temperature applications. The heat pipes was made of stainless steel of which the dimension was $140\;m\;(L)\;{\times}\;95m\;(W)\;{\times}\;46 m\;(H)$ and the thickness of the container was 5 mm. Both inner surfaces of evaporator and condenser were covered with screen meshes to help spread the liquid state working fluid. To provide additional path for the working fluid, a lattice structure covered with screen mesh wick was inserted in the heat pipe. The bottom surface of the heat pipe was heated by an electric heater and the top surface was cooled by circulating coolant. The concern in this study was to enhance the temperature uniformity at the bottom surface of the heat pipe while an uneven heat source up to 900 W was in contact. The temperature distribution over the bottom surface was monitored at more than twenty six locations. It was found that the operating performance of the sodium heat pipe was critically affected by the inner wall temperature of the condenser region where the working fluid may be changed to a solid phase unless the temperature was higher than its melting point. The maximum temperature difference across the bottom surface was observed to be $114^{\circ}C$ for 850 W thermal load and $100^{\circ}C$ coolant inlet temperature. The effects of fill charge ratio, coolant inlet temperature and operating temperature on thermal performance of heat pipe were analyzed and discussed.