• 대한전기학회논문지:시스템및제어부문D
• /
• 제54권10호
• /
• pp.581-586
• /
• 2005

The multi-beam side scan sonar system uses the towfish installed sonars, it is an equipment that search images of the bottom surface of the sea in real time. It is a typical equipment that is related to a sea investigation such as a geological survey, seabed communication cable and power line cable placing repair investigation, fish breeding ground investigation, sea purification, relic and mineral investigation, and mine and submarine search. Recently, it is used to sea purification and geological survey that require information of the correct surface of the seabed. Therefore, this research develops multi-beam sensors for a side scan sonar that supply various information with the fast scan speed and correct high resolution that is not a simple underwater investigation equipment.

• 한국산학기술학회논문지
• /
• 제17권5호
• /
• pp.372-378
• /
• 2016

항만 구조물인 케이슨 및 블록 등을 수중에 거치하기 위해서는 기초사석을 투하하고 이 위에 구조물을 설치한다. 이때 기초 사석은 상구구조물을 지지하기 위한 기초 토대로서 사석의 규격, 비중, 중량 모양 및 치수 등이 균일하고 치밀하여야 하며 선정시험을 통과한 사석만을 사용하여 시공하야 한다. 또한 이러한 기초 사석을 고르게 만들어 주는 작업 구조물의 거치 이전에 반드시 이루어 져야 한다. 본 연구에서는 수중 고르기 작업 공정의 무인화를 위하여 수중 고르기 및 굴삭용 무인기계 뿐만 아니라 무인기계화 시공을 위한 원격제어용 운영시스템, 수중 물체 인식 및 수중위치 분석을 위한 수중 환경 모니터링 시스템이 개발되었다. 본 장비는 육상 및 수중 테스트를 통하여 검증을 완료 하여 우수한 성능을 확인하였다. 그러나 현장에 본 장비를 투입하기 위해서는 성능뿐만 아니라 건설 공정의 제안 및 분석 그리고 효율(경제성)이 분석되어야 한다. 본 연구에서는 수중고르기장비의 성능 및 기능, 건설공정절차, 기존의 공법과의 비교 분석하였다. 분석결과 기존의 잠수부를 투입하는 건설공법에 비하여 경제성, 효율성, 안전성이 향상되는 것으로 확인되었다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.696-699
• /
• 2004

A side scan sonar system uses the towfish installed sonars, It is an equipment that search images of the bottom surface of the sea in real time. It is a typical equipment that is related to a sea investigation such as a geological survey, seabed communication cable and power line cable placing repair investigation, fish breeding ground investigation, sea purification, relic and mineral investigation, and mine and submarine search. It used to fined objects and investigate on the seabed surface. But, recently, it is used to sea purification and geological survey that require information of the correct surface of the seabed. So, it needs various filtering technique and image processing techniques development to acquire high resolution image. therefore, this research develops a side scan sonar using multi-beam sensors that supply various information with the fast scan speed and correct high resolution that is not a simple underwater investigation equipment.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2006년도 전기학술대회논문집
• /
• pp.317-318
• /
• 2006

The towfish oi a side scan sonar is an equipment that search images of the bottom surface of the sea in real time. It is a typical equipment that is related to a sea investigation such as a geological survey, seabed communication cable and power line cable placing repair investigation, fish breeding ground investigation, sea purification, relic and mineral investigation, and mine and submarine search. It used to find objects and Investigate on the seabed surface. But, recently, it is used to sea purification and geological survey that require information of the correct surface of the seabed. So, it needs various filtering technique and image processing techniques development to acquire high resolution image. Therefore, this research develops a side scan sonar using multi-beam sensors that supply various information with the fast scan speed and correct high resolution that is not a simple underwater investigation equipment.

• 산업경영시스템학회지
• /
• 제44권3호
• /
• pp.10-21
• /
• 2021

Recently, the demand for atypical structures with functions and sculptural beauty is increasing in the construction industry. Existing mold-based structure production methods have many advantages, but building complex atypical structures represents limitations due to the cost and technical characteristics. Production methods using molding are suitable for mass production systems, but production cost, construction period, construction cost, and environmental pollution can occur in small quantity batch production. The recent trend in the construction industry calls for new construction methods of customized small quantity batch production methods that can produce various types of sophisticated structures. In addition to the economic effects of developing related technologies of 3D Concrete Printers (3DCP), it can enhance national image through the image of future technology, the international status of the construction civil engineering industry, self-reliance, and technology export. Until now, 3DCP technology has been carried out in producing and utilizing residential houses, structures, etc., on land or manufacturing on land and installing them underwater. The final purpose of this research project is to produce marine structures by directly printing various marine structures underwater with 3DCP equipment. Compared to current underwater structure construction techniques, constructing structures directly underwater using 3DCP equipment has the following advantages: 1) cost reduction effects: 2) reduction of construct time, 3) ease of manufacturing amorphous underwater structures, 4) disaster prevention effects. The core element technology of the 3DCP equipment is to extrude the transferred composite materials at a constant quantitative speed and control the printing flow of the materials smoothly while printing the output. In this study, the extruding module of the 3DCP equipment operates underwater while developing an extruding module that can control the printing flow of the material while extruding it at a constant quantitative speed and minimizing the external force that can occur during underwater printing. The research on the development of 3DCP equipment for printing concrete structures underwater and the preliminary experiment of printing concrete structures using high viscosity low-flow concrete composite materials is explained.

• 한국해양공학회지
• /
• 제6권2호
• /
• pp.113-124
• /
• 1992

The offshore industry created a need for quality wet weld repairs. Wet welding is a fast method of repair providing sound, structural quality welds. It requires less support equipment than a similar underwater dry weld repair or the alternative mechanical connections. Compared to welds made in air, underwater wet welds are plagued by increased hardness due to rapid quenching by the surrounding water. In this paper is described the experimntal study of improving the cooling rates of wet welds of TMCP steel plate by shielding around weld arc surroundings. The principal results of this experimental investigation can be summarized as follows : By shielding around weld arc surrounding, the cooling rates resulting from wet welds on TMCP steel plate could be lower than that of nonshielded wet welds and the fesibility on high quality of mecanical properties of wet weld on TMCP steel plate was carried out with shielded weld arc surrounding.

• 한국산학기술학회논문지
• /
• 제15권3호
• /
• pp.1778-1785
• /
• 2014

최근 초장대 교량, 인공섬 또는 해상풍력 기초 등에 대한 관심이 높아지고 있으며, 다양한 해양구조물을 안전하게 건설하기 위해서는 신뢰성이 높은 지반조사가 필수적이다. 현재 해상의 지반조사 작업은 해상용 작업선에 육상용 지반조사장비를 설치하여 실시하고 있다. 이럴 경우, 30m이상의 대수심 조건이나 고파랑, 높은 조류 등 열악한 해양 환경에 제약을 많이 받는 한계점을 나타내고 있다. 대수심 조건에서 안전하고 신뢰성이 높은 지반조사를 위하여 착저형 무인 해저지반조사 장비를 개발하였다. 개발된 해저지반조사 장비는 수심 100m 조건에서 심도 50m까지 지반조사가 가능하며, 표준관입시험(Standard Penetration Test, SPT), 지반보링 시스템, 암반 코어링 시스템이 가능하도록 설계 및 제작되었다. 수중에서 4노트(2m/s)의 조류에 대한 해저지반조사 장비의 거동을 수치해석을 통해 검토하였다. 또한 해저지반조사 장비에 장착되어 있는 표준관입시험 장치의 에너지 효율을 실험으로부터 측정한 결과 78%를 확인하였다.

• 한국해양공학회지
• /
• 제34권5호
• /
• pp.351-360
• /
• 2020

Of late, demand for test sites for marine equipment such as ASV, AUV, ROV, and various underwater sensors is increasing. The authors have focused on an oscillating water column (OWC), which is being constructed near Chagwido Island Jeju, as one of the test-sites. The main objective of the OWC is to produce wave energy and develop technologies. It has been built in the sea approximately 1 km off the coast. It has berth accommodation and some rooms that can be used as laboratories. To investigate the feasibility of its usage as a test site for marine equipment, we acquired bathymetric data around the OWC by using a multi-beam echo sounder and a single-beam scanning sonar. The accessibility of the OWC from nearby ports and the use of support vessels or ships were also investigated. 3D point cloud data from the multi-beam echo sounder and 2D acoustic images from the scanning sonar are expected to be used as references for identifying changes over time. In addition, through these experiments, we derived a procedure to use this facility as a test site by using the IDEF0 functional modelling method. Based on this preliminary investigation and previously reported examples, we determined the general conditions and preferences for evaluating the performance of various marine equipment heuristically. Finally, we developed five applications that were derived from this investigation.

• 대한조선학회논문집
• /
• 제40권6호
• /
• pp.1-11
• /
• 2003

For an accurate shock response analysis of a floating structure such as a naval surface ship subjected to an UNDEX(UNDerwater Explosion), the cavitation effects due to reflected wave at free surface and wetted structural surface should be considered. In this study, for the consideration of cavitation effects an effective method using LS-DYNA/USA and its theoretical background were presented. Through the application of the analysis of bulk cavitation phenomena in the free field, it could be confirmed that almost the same results were obtained between LS-DYNA/USA code and the analytical method. for the investigation of cavitation effects from the structural shock response characteristics, three dimensional UNDEX shock response analysis of an idealized ship model was also carried out It could be found that the cavitation Phenomena gave significant effects on the structural shock response characteristics, and especially that the shock loadings calculated at the installed location of shipboard equipment were underestimated in the case of no consideration of the cavitation effects, which might cause the severe mistake in its shock-resistance design.

• 한국산업융합학회 논문집
• /
• 제26권4_2호
• /
• pp.697-703
• /
• 2023

Intertidal zones, akin to tidal flats, are among the potential areas where underwater cultural heritage might be submerged. However, the shallow depths in these regions present challenges for conventional vessel-based survey methods. Moreover, during low tides, intertidal zones transform into tidal flats, limiting the efficiency of survey efforts due to restricted access and potential risks. As a result, proper underwater cultural heritage surveys encounter difficulties in these environments. In recent times, extensive research is underway to address these issues by investigating underwater cultural heritage surveys in intertidal zones, encompassing diverse fields, including equipment-based investigations. This study aimed to explore the feasibility of utilizing unmanned aerial vehicles (UAVs) to conduct intertidal cultural heritage surveys, employing aerial photography and 3D mapping to create detailed orthoimages and 3D models. The study focused on assessing the potential application of these techniques for cultural heritage surveying within intertidal zones. Notably, the survey conducted in Jindo's Naesan-ri demonstrated high-resolution capabilities, enabling the distinction of actual pottery fragments mixed within gravel fields. Similarly, in the survey of Jindo's Byeokpa-hang, it was found that a wooden pillar structure existed in a section about 200m long. The integration of various sensors, including LiDAR, with UAVs allows for diverse investigation possibilities, including bathymetric measurements, and is expected to facilitate the acquisition of varied datasets for further research and assessment.