• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.1 no.1
• /
• pp.105-111
• /
• 1997

This Paper Proposes a new efficient system design strategies for the acoustic-based underwater multiple modem and media access control protocol. The system aims to establish the acoustic-based communication network of an underwater vehicles for deep sea mining, which ensures a certain level of maximum throughput regardless of the propagation delay of acoustic and allows fast data transmission through the acoustic-based multiple channel. A media access control protocol for integrated communication network and it's acoustic-based communication modems that allows 'peer-to-peer' communication between a surface mining plant multiple underwater system is designed, and the proposed media access control protocol is implemented for its verification. Furthermore, a proposed design strategies which make it possible to control the multiple vehicle for an underwater mining is presented in this paper.

• Journal of Korea Multimedia Society
• /
• v.24 no.11
• /
• pp.1526-1537
• /
• 2021

Due to the difference between the underwater communication environment and the terrestrial communication environment, the radio communication mainly used on the ground cannot be used in underwater. For this reason, in the underwater communication environment, various communication media such as acoustic waves, infrared rays, light and so on has been studied, but there exist several difficulties in operating them individually due to their physical limitations. The concept for overcoming these difficulties is the very underwater multi-media communication, a method to select a communication medium best suitable for the current underwater environment among underwater communication multimedia whenever there occurs underwater communication failure. In this paper, we present an underwater multi-media communication network based on star topology and a fragmentation and reassembly technique to solve the problems caused by the different MTU (Maximum Transmission Unit) sizes among different underwater communication media. We also present the estimations and analysis on processing times in each of fragmentation and reassembly and the total data amount for transmitting fragments in our proposed underwater multi-media communication network.

• Proceedings of the KIEE Conference
• /
• 2000.07c
• /
• pp.1658-1660
• /
• 2000

Simple signs were usually exchanged as the means of underwater communications. As people recently, need more informations for underwater activities, necessities of underwater communication systems exchanging hunman voice are increased. The purpose of this paper is understanding the ordinary characteristics of underwater communication and investigating the necessary conditions for a good underwater communication system by making a basic communication module. The experiment is achieved by applying AM (Amplitude Modulation) which is mainly used for the underwater communication systems and using common ultrasonic transducers. Ultrasonic transducers usually have narrow bandwidth for transducing electrical energy to mechanical energy. For improvement of sound reconstruction, transducers need more bandwidth which covers voice's frequency range, and goof linearity characteristics in this frequency range. As underwater transmissions have many factors to distort signals. Amplitude Modulation is not a proper way for underwater communications. Using digital signal by sampling human voice should be a good way for this systems, because digital communication simplify transmitting signals.

• Journal of Korea Multimedia Society
• /
• v.17 no.5
• /
• pp.631-639
• /
• 2014

Recently, research on Media Access Control (MAC) techniques for underwater acoustic communication has been conducted actively. For successful acoustic communication in underwater conditions, development of environmentally adaptive MAC techniques, which is taking narrow bandwidth, distance, depth, noise level, salinity, multipath and etc into account, is an especially important work. In this paper, knowledge based system is introduced not only to obtain adaptive and optimal communication parameters but also increase network efficiency and availability by requesting change of MAC techniques based on decisions from knowledge-based system Smart Decision Block (SDB). Computer simulations were also conducted to verify the performance of the proposed system in underwater conditions.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.17 no.1
• /
• pp.239-260
• /
• 2023

The underwater acoustic wireless communication networks are generally formed by the different autonomous underwater acoustic vehicles, and transceivers interconnected to the bottom of the ocean with battery deployed modems. Orthogonal frequency division multiplexing (OFDM) has become the most popular modulation technique in underwater acoustic communication due to its high data transmission and robustness over other symmetrical modulation techniques. To maintain the operability of underwater acoustic communication networks, the power consumption of battery-operated transceivers becomes a vital necessity to be minimized. The OFDM technology has a major lack of peak to average power ratio (PAPR) which results in the consumption of more power, creating non-linear distortion and increasing the bit error rate (BER). To overcome this situation, we have contributed our symmetry research into three dimensions. Firstly, we propose a machine learning-based underwater acoustic communication system through long short-term memory neural network (LSTM-NN). Secondly, the proposed LSTM-NN reduces the PAPR and makes the system reliable and efficient, which turns into a better performance of BER. Finally, the simulation and water tank experimental data results are executed which proves that the LSTM-NN is the best solution for mitigating the PAPR with non-linear distortion and complexity in the overall communication system.

• Ocean Systems Engineering
• /
• v.8 no.1
• /
• pp.33-39
• /
• 2018

The paper presents a numerical underwater channel model developed in MATLAB for estimating the optical link budget between a light emitting diode (LED) based optical transmitter and a photo diode (PD) receiver when operated in the harbor, coastal and deep waters locations in the Bay of Bengal. The water samples are collected at different locations in the Bay of Bengal using a water sampler during an offshore research cruise. The optical attenuation, the main inherent parameter determining the range of the optical communication link is identified for the different waters using an underwater irradiance measurement system in the laboratory. The identified parameters are applied to the numerical model and found that a 10 W LED and a photo diode based system can provide the optical budget required for a horizontal underwater communication range of about 0.5, 14 and 35 m in the harbor, coastal and deep waters locations respectively. By increasing the transmitter power to 50 W, the operating range of the communication link could be increased up to 53 m in deep water locations in the Bay of Bengal.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.7
• /
• pp.923-928
• /
• 2014

Communication underwater is severely limited when compared to communications in air because water is essentially opaque to electromagnetic radiation except in visible range. Acoustic systems are capable of long range communication, but offer limited data rates and significant latency due to the speed of sound in water. On the other hand, optical wireless communication has been proposed as one of the best alternatives to meet the requirements of the underwater observation and subsea monitoring systems. It will help In this study, we are developing an underwater optical communication system that integrates with a depot ship floating on the water. An interface between LED lighting communication system and Bluetooth module is presented to support the underwater-to-air communications. Error free image and text transmission at 3 m of water were achieved at bit rates of 230.4 kbps. This development effort will enhance infrastructure to efficiently interconnect between underwater wireless systems and command ship networks for underwater monitoring.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.4
• /
• pp.810-816
• /
• 2011

The existing underwater acoustic communications modem is developing based on commercial products, so it is possible on functionality and performance of underwater acoustic communications modem implementation. But the production of development system is required to single platform system implementation at the system's size and cost. So this paper designs and implements the signal processing module as an important role to single hardware platform production of underwater acoustic communication modem by using TigerSHARC DSP processor.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.2
• /
• pp.235-242
• /
• 2006

This paper proposes the new efficient system design strategies for the acoustic-based underwater communication system and it's media access protocol, which make it possible to control the multiple vehicles for underwater duty working by the surface plant. For an approach to implementation of the system, it is inevitable to establish acoustic-based underwater digital communication network to exchange the information between a surface plant and multiple vehicles in underwater.

• Journal of Advanced Navigation Technology
• /
• v.23 no.1
• /
• pp.61-68
• /
• 2019

Underwater wireless light communication system is quite necessary to retrieve recorded data from underwater devices or the black box without taking back it body. In this paper, a research on the light sensor technology in underwater wireless light communication under turbid sea was studied. A noise source under turbid sea for light communication was analysed, and a sensor system for light sensing using the reference light signal to remove the noises and to improve the output swing power wasstudied. Also, an underwater communication system was manufactured to validate the good performance of the development system, and using the system, the good performance of the developed system was validated through the light communication test in the tank containing the turbid sea water was presented.