• 제목/요약/키워드: Underground parts

검색결과 197건 처리시간 0.033초

유한요소해석을 통한 송산리고분군 무령왕릉의 구조안전성 평가 (Structural Safety Evaluation of Tomb of King Muryeong in Tumulis of Songsan-ri Through Finite Element Analysis)

  • 이가윤;조영훈;이성민;이찬희;이기학
    • 한국공간구조학회논문집
    • /
    • 제20권3호
    • /
    • pp.63-70
    • /
    • 2020
  • Tomb of King Muryeong, located in Sonsan-ri, was found vulnerable due to leakages during since the summer of 2016. This research aims to evaluate structural safety of the Tomb under the tumulus. Site surveys were conducted to find vulnerable inner parts. Structural safety assessment is presented based on both site survey results and analytical results obtained through FEM analysis using the ANSYS program. The underground structure was explicitly modeled to focus on two types of loadings: design loads and actual gravity loads. In general, the tomb does not show any critical deflection increase or damage through the analytical investigation. However, maintenance through continuous monitoring is necessary to prevent severe deflections and stress concentrations since the rigidity of the tomb materials are very vulnerable and likely to be reduced due to prolonged weathering and continuous rain leakage.

ITS를 위한 대중교통 서비스 동향 (The trends of public transportation interlocking system for ITS)

  • ;임일권;김영혁;박소아;이재광;박우전;천병구
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국해양정보통신학회 2010년도 추계학술대회
    • /
    • pp.62-65
    • /
    • 2010
  • ITS는(지능형 교통 시스템: Intelligent Transport System)을 이용한 대중교통을 더욱 편리하게 이용하기 위하여 본 논문은 버스와 지하철의 도착 정보를 공용으로 서버처리 시스템을 연동하여 관리하고 네트워크로 실시간 정보를 사용자에게 전송하여 그로 인해 사용자가 편리하게 사용하며, 대중 교통 이용의 효율성을 위해서 관련된 기술이 최근 동향을 분석 간다.

  • PDF

카본블랙내 이온성 불순물들에 따른 반도전 재료(층)의 열적특성 (Thermal Properties of Semiconductive Materials(Shield) by Sonic Impurities in Carbon Black)

  • 이용성;최용성;박대희;이경용
    • 대한전기학회논문지:전기물성ㆍ응용부문C
    • /
    • 제54권4호
    • /
    • pp.149-153
    • /
    • 2005
  • We have investigated thermal properties showed by changing the content of carbon black which is the component parts of semiconductive shield in underground power transmission cable. Specimens were made of sheet with the nine of those for measurement. Heat capacity (${\Delta}$H), glass transition temperature (Tg) and melting temperature (Tm) were measured by DSC (Differential Scanning Calorimetry). The ranges of measurement temperature were from -100($^{\circ}C$) to 100($^{\circ}C$), and heating rate was 4($^{\circ}C$/min). And then thermal diffusivity was measured by LFA 447. The dimension of measurement temperature was 25[$^{\circ}C$]. Glass transition temperature of specimens was showed near -25[$^{\circ}C$] and the heat capacity and the melting temperature from the DSC results were simultaneously decreased according to increasing the content of carbon black, while thermal diffusivity was increased according to increasing the content of carbon black. Because ionic impurities of carbon black having Fe, Co, Mn, Al and Zn are rapidly passed kinetic energy increasing the number of times breaking during the unit time with the near particles according to increasing vibration of particles by the applied heat energy.

전력케이블내 반도전 재료(층)의 기계적 특성 및 평활도에 관한 연구 (Mechanical Properties and Smoothness of Semiconductive Materials(Shield) in Power Cable)

  • 양종석;이용성;박대희;이경용
    • 대한전기학회논문지:전기물성ㆍ응용부문C
    • /
    • 제54권4호
    • /
    • pp.154-160
    • /
    • 2005
  • We have investigated thermal properties showed by changing the content of carbon black which is the component parts of semiconductive shield in underground power transmission cable. Specimens were made of sheet with the nine of those for measurement. Density of specimens was measured by density meter, and then stress-strain of specimens was measured by TENSOMETER 2000. A speed of measurement was 200[mm/min], ranges of stress and strain were 400(Kgf/$cm^2$) and 600[$\%$]. In addition, tests of stress-strain were progressed by aging specimens at air oven. Finally surface profile was shown in order to looking for protrusion of specimens by using smoothness tester. Density was highly measured according to increasing the content of carbon black from this experimental result, and stress was decreased, while strain was increased according to increasing the content of carbon black. And stress-strain were decreased some after aging because of oxidation reaction of chemical defect. Lastly surface of specimens smoothed generally.

Dynamic characteristics and wind-induced vibration coefficients of purlin-sheet roofs

  • Zhang, Yingying;Song, Xiaoguang;Zhang, Qilin
    • Steel and Composite Structures
    • /
    • 제22권5호
    • /
    • pp.1039-1054
    • /
    • 2016
  • This paper presents the dynamic characteristics analysis of the purlin-sheet roofs by the random vibration theories. Results show that the natural vibration frequency of the purlin-sheet roof is low, while the frequencies and mode distributions are very intensive. The random vibration theory should be used for the dynamic characteristics of the roof structures due to complex vibration response. Among the first 20th vibration modes, the first vibration mode is mainly the deformations of purlins, while the rest modes are the overall deformations of the roof. In the following 30th modes, it mainly performs unilateral local deformations of the roof. The frequency distribution of the first 20th modes varies significantly while those of the following 30th modes are relatively sensitive. For different parts, the contributions of vibration modes on the vibration response are different. For the part far from the roof ridge, only considering the first 5th modes can reflect the wind-induced vibration response. For the part near the ridge, at least the first 12 modes should be considered, due to complex vibration response. The wind vibration coefficients of the upwind side are slightly higher than that of the leeward side. Finally, the corresponding wind vibration coefficient for the purlin-sheet roof is proposed.

참검정풍뎅이에 의한 춘기의 인삼 피해 양상 (Pattern of Ginseng Damage by Korean Black Chafer (Holotrichia diomphalia Bates) in Spring)

  • 김기황
    • 한국응용곤충학회지
    • /
    • 제30권3호
    • /
    • pp.174-179
    • /
    • 1991
  • 1986~1990년에 3년근 인삼포장에서 참검정풍뎅이 유충에 의한 춘기 피해 양상을 조사한 결과 인삼포장의 바깥쪽일수록 피해가 심하였는데 이는 참검정풍뎅이 자성충의 dirks 이동 습성 때문으로 보인다. 3령 유충에 의한 3년근 인삼의 피해부는 뿌리 동례의 상부, 중부, 하부 또는 뿌리 전체였으며 드물게 지하부 줄게에도 피해가 있었다. 섭식기 3령층의 평균 서식 깊이는 인삼 유묘, 2년근, 3년근, 쑥에서 각각 3.2cn, 5.6cm, 6.6cm, 4.9cm 였다. 춘기의 참검정풍뎅이 유충에 의한 인삼의 피해는 주러 5월 중순에서 7월 상순에 발생하였고 강우량이 증가할 경우 피해가 일시적으로 감소하는 것으로 보였다.

  • PDF

EEA/탄소나노튜브와 카본블랙 복합체의 PTC/NTC특성 (PTC/NTC Properties of EEA/Carbon nanotube and Carbon Black Composites)

  • 양종석;이경용;최성헌;이재형;박대희
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2006년도 하계학술대회 논문집 Vol.7
    • /
    • pp.236-237
    • /
    • 2006
  • We have investigated volume resistivity showed by changing the content of Carbon nanotube and carbon black which is the component parts of semiconducting shield in underground power transmission cable. Specimens were made of sheet form with the six of specimens for measurement. Volume resistivity of specimens was measured by volume resistivity meter after 10 minutes in the preheated oven of both $23{\pm}1[^{\circ}C]$ and $90{\pm}1[^{\circ}C]$. The volume resistivity decreased by adding Carbon nanotube and carbon black. Also the volume resistivity had different properties because of PTC/NTC tendencies at between $23[^{\circ}C]$ and $90[^{\circ}C]$. We experimented with electric properties of semiconducting components with fewer Carbon nanotube than carbon black.

  • PDF

큰꽃 삽주(Atractylodes macrocephala KOIDZ)의 3요소 적정 시비량에 관한 연구 (Study on Appropriate Fertilization Level of Atractylodes macrocephala KOIDZ)

  • 류태석;조지형;김수용
    • 한국자원식물학회지
    • /
    • 제13권2호
    • /
    • pp.118-123
    • /
    • 2000
  • 경북 북부지역에서 큰삽주의 1년생 종근의 3요소 적정 시용량을 구명하고자 1997∼1998년간 수행한 결과를 요약하면 다음과 같다. 1. 3요소 시용량에 따른 지상부의 생육은 N과 K는 수준이 증가할수록 감소하였고 P는 증가하였다. 2. N-P-K=8-9-3kg/10a 시용시 지상부 건물중이 가장 많았고, 지하부는 N-P-K=8-6-3 kg/10a 시용시 10a당 수량이 가장 높았다. 3. 3요소 적정 시용량을 추정한 결과 N은 6, P는 4, K는 6kg/10a로 판단되었다.

  • PDF

Assessment of the swelling potential of Baghmisheh marls in Tabriz, Iran

  • Asghari-Kaljahi, Ebrahim;Barzegari, Ghodrat;Jalali-Milani, Shahrokh
    • Geomechanics and Engineering
    • /
    • 제18권3호
    • /
    • pp.267-275
    • /
    • 2019
  • Tabriz is a large Iranian city and the capital of the East Azerbaijan province. The bed rock of this city is mainly consisted of marl layers. Marl layers have some outcrops in the northern and eastern parts of city that mainly belong to the Baghmisheh formation. Based on their colors, these marls are classified into three types: yellow, green, and gray marls. The city is developing toward its eastern side wherein various civil projects are under construction including tunnels, underground excavation, and high-rise building. In this regard, the swelling behavior assessment of these marls is of critical importance. Also, in lightweight structures with foundation pressure less than swelling pressure, several problems such as walls cracking and jamming of door and windows may occur. In the present study, physical properties and swelling behavior of Baghmisheh marls are investigated. According to the X-ray diffractometer (XRD) results, the marls are mainly composed of Illite, Kaolinite, Montmorillonite, and Chloride minerals. Type and content of clay minerals and initial void ratio have a decisive role in swelling behavior of these marls. The swelling potential of these marls was investigated using one-dimensional odometer apparatus under stress level up to 10 kPa. The results showed that yellow marls have high swelling potential and expansibility compared to the other marls. In addition, green and gray marls showed intermediate and low swelling potential and swelling pressure, respectively.

렌티큘러 스티커를 이용한 커버리지 구현 연구 (Study of Coverage Implementation Using Lenticular Sticker)

  • 정승혁
    • 한국전자통신학회논문지
    • /
    • 제14권3호
    • /
    • pp.573-578
    • /
    • 2019
  • 최근 실내 측위의 기술이 발달함에 따라 기지국 측위, 와이파이 측위 및 블루투스 비콘 측위 기술이 건물 및 지하공간에 도입되어 운용되고 있다. 이는 시스템과 서비스를 제공하는 공급자 중심의 측위로 사용자의 동선기반에서 사용자가 직접 측위하는 방식인 렌티큘러 측위 기술을 도입하여, 사용자 중심의 초고정밀 측위가 가능한 기술을 소개한다. 렌티큘러 스티커를 활용한 커버리지 구현 방안 연구를 통해 렌티큘러 측위 기술의 가장 중요한 부분 중 하나인 렌티큘러 스티커의 커버리지 구현 방안에 대해 살펴보고, 사용자 관점의 짧은 측위 시간의 결과 값을 제시하고자 한다.