• Journal of Chest Surgery
• /
• v.12 no.3
• /
• pp.183-190
• /
• 1979

A 23-year-old male patient complained dyspnea on exertion and orthopnea since December 1977. On examination, he was tall and slender. There was grade IV/VI to-and-fro murmur on the left sternal border especially on Erb`s point. The liver was descended 2 fingers breadth below right costal margin. There were no signs of Marfan`s syndrome. Echocardiography demonstrated partial closure of aortic valve and dilated aortic root with enlargement of ascending aorta. Left heart cardiac catheterization revealed moderately elevated pulmonary wedge pressure and right ventricular pressure. The left ventricular end diastolic pressure was markedly elevated to 26 mmHg. On aortography, the aortic regurgitation was severe and it was belonged to angiographically Grade IV. The aortic valve was replaced with Carpentier-Edwards valve without excision and replacement of ascending aorta, under the impression of rheumatic valvular heart disease. After closure of aortotomy, blood pressure was transiently elevated and bleeding from the site of inserting air vent needle of ascending aorta was developed. The bleeding was not controlled by any means. On postmortem microscopic study, the histologic changes were strikingly limited to the ascending aorta from the region of the aortic valve ring.

• Computational Structural Engineering
• /
• v.2 no.1
• /
• pp.55-64
• /
• 1989

A procedure which may be useful in dealing with problems of half plane is considered. Boundary elements are combined with nonlinear finite elements to facilitate their merits. Boundary elements for semi-infinite region are composed using the Melan's solution for half plane. Nonlinear finite elements are used to model irregularity or nonhomogeneity of elasto-plastic materials, which is usual in underground structures. In order to verify the procedure, a shallow tunnel under internal pressure is analysed using the nonlinear finite element method and combined method. It is shown that the developed procedure is accurate enough compared with other method.

• Mycobiology
• /
• v.35 no.1
• /
• pp.30-35
• /
• 2007

The fruits showing brown rot symptom on dwarf flowering almond were found in Gongju, Chungchungnam-Do in Korea in July 2005. Small water-soaked lesions on the fruits were initiated, and gradually developed to soft rot covered with gray conidia. Then the diseased fruits were shrunk and became grayish-black mummies. A fungus was isolated from the diseased fruit and its morphological, cultural and molecular genetic characteristics were investigated. Typical blastospores of Monilinia spp. were observed under a light microscope both from tissues of the diseased fruits and from PDA-grown cultures. The fungus grew well at $25^{\circ}C$ and on PDA. The ITS ribosomal DNA region (650 bp) of the fungus was amplified by PCR and analyzed. Comparative data on ITS sequence homology among Monilinia spp., ITS sequence-based phylogram and morphological characteristics showed that the fungus is Monilinia fructicola. This is the first report on Monilinia fructicola causing brown rot on fruits of dwarf flowering almond in Korea.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.36 no.3
• /
• pp.144-154
• /
• 1994

An efficient tidal model, TIDE which is an iterative type, nonlinear finite element model has developed for the analysis of the tidal movement in the coastal area which is characterized by irregular boundaries and bottom topography. Traditional time domain finite element models have been in difficulties with requirement for high eddy viscosity coefficients and small time steps to insure numerical instability. These problems are overcome by operating in the frequency domain with an elaborate grid system by combining the triangular and quadrilateral shape grids. Furthermore, in order to handle non-linearity which will be more significant in the shallow region, an iterative scheme with least square error minimization algorithm has been implemented in the model. The results of TIDE model are agreed with the analytical solutions in a rectangular channel under the condition of tidal waves entering the channel closed at one end.

• Journal of the Korean Magnetic Resonance Society
• /
• v.17 no.2
• /
• pp.92-97
• /
• 2013

We study the electron spin resonance line-width (ESRLW) of $Fe^{3+}$ in crystalline $LiNbO_3$ ; the ESRLW is obtained using the projection operator method (POM) developed by Argyres and Sigel. The ESRLW is calculated to be axially symmetric about the c-axis and is analyzed by the spin Hamiltonian with an isotopic g factor at a frequency of 9.5 GHz. The ESRLW increases exponentially as the temperature increases, and the ESRLW is almost constant in the high-temperature region (T>8000 K). This kind of temperature dependence of the ESRLW indicates a motional narrowing of the spectrum when $Fe^{3+}$ ions substitute the $Nb^{5+}$ ions in an off-center position. It is clear from this feature that there are two different regions in the graph of the temperature dependence of the ESRLW.

• Nuclear Engineering and Technology
• /
• v.53 no.7
• /
• pp.2295-2303
• /
• 2021

To investigate wall-thinning impact on axial load resistance of Zircaloy-4 cladding rods after a LOCA transient, axial tensile samples have been machined on as-received tubes with reduced thicknesses between 370 and 580 ㎛. After high temperature oxidation under steam at 1200 ℃ with measured ECR ranging from 10 to 18% and water quenching, machined samples were axially loaded until fracture. These tests were modeled using a fracture mechanics approach developed in a previous study. Fracture stresses are rather well predicted. However, the slightly lower fracture stress observed for wall-thinned samples is not anticipated by this modeling approach. The results from this study confirm that characterizing the axial load resistance using semi-integral tests including the creep and burst phases was the best option to obtain accurate axial strengths describing accurately the influence of wall-thinning at burst region.

• Annual Conference of KIPS
• /
• 2011.04a
• /
• pp.547-550
• /
• 2011

The purpose of this paper is to verify and validate the maintenance tasks of the construction of a nuclear facility using a digital mock-up and simulation technology instead of a physical mock-up. Prior to the construction of a nuclear facility, a remote simulator that provides the opportunity to produce a complete digital mock-up of the PRIDE (Pyroprocess Integrated Inactive DEmonstration Facility) region and its remote handling equipment, including operations and maintenance procedures has been developed. In this paper, the system architecture and graphic user interface of a remote simulator that coincides with the extraordinary nature of a nuclear fuel cycle facility is introduced. In order to analyze the remote accessibility of a remote manipulator, virtual prototyping that was performed it by using haptic device of external input devices under a 3D full-scale digital mock-up is explained.

• Archives of design research
• /
• v.13 no.2
• /
• pp.133-143
• /
• 2000

Recently there are increasing demands for establishing its peculiar city image in Korea. In establishing a urban image, streetscapes of various functional regions in city have very important roles. And many streetscape were designed and are under design for that purpose. There are many factors involved in the image-generation of streetscape, and the facade is one of the most important factors. In this study, we surveyed many factors in the city-regions of various functions to find out desirable characteristics of facade for each region. And we are going to use there findings as a basic data in the future streetscape design. We selected traditional region(Insadong, Chongro-gu, Seoul), apartment-type residential region (Apkujung-dong, Kangnam-gu, Seoul), and newly developed-downtown (Dunsan-dong, Seo-gu, Daejun) as streetscapes of various functions for facade study. Texture, color, form, size, structure and location of the following facade components were surveyed and analyzed. The surveyed components were window, entrance, equipment, signboard, show window.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.43 no.4
• /
• pp.469-476
• /
• 2023

Soil plasticity models for cyclic and dynamic loads are essential in non-linear numerical analysis of geotechnical structures. While a single yield surface model shows a linear behavior for cyclic loads, J₂-bounding surface plasticity model with zero elastic region can effectively simulate a nonlinearity of the ground response with the same material properties. The radius of the yield surface inside the boundary surface converged to 0 to make the elastic region disappear, and plastic hardening modulus and dilatancy define plastic strain increment. This paper presents the stress-strain incremental equation of the developed model, and derives plastic hardening modulus for the hyperbolic model. The comparative analyses of the triaxial compression test and the shallow foundation under the cyclic load can show stable numerical convergence, consistency with the theoretical solution, and hysteresis behavior. In addition, plastic hardening modulus for the modified hyperbolic function is presented, and a methodology to estimate model variables conforming 1D equivalent linear model is proposed for numerical modeling of the multi-dimensional behavior of the ground.

• Korean Institute of Interior Design Journal
• /
• v.22 no.4
• /
• pp.121-129
• /
• 2013

This study was aimed at determining the characteristics of circular multi-family housing under the assumption that the shape of a residential building affects local identity. A total of six case studies were included in this study, three case studies on idle historical industrial facilities turned into residential buildings and another three on multi-family housing located in newly developed residential complexes. The study drew its conclusions as follows. First, the design of circular multi-family housing was intended to maximize security and defense from the outside in older times. This was later developed as the terrace house style with geometric urban squares designed under the urban planning of the Baroque period. This evolved high-density housing with a courtyard in the center offering a green open space, with the aim of restoring a sense of humanity. Second, the six case studies on circular multi-family housing were analyzed from the viewpoint of each factor of local identity, including historical and cultural, landscape, and community. Third, the historical and cultural elements of circular multi-family housing are found in some unused historical industrial facilities remodeled into residential buildings. They provide new capabilities and shapes desired by society at a given time, while maintaining familiar styles and elements of history, integrating a legacy of the past into the present. Fourth, circular multi-family housing with unique shapes and structures often become landmarks of a region with their distinctive appearance against a uniform urban environment and the monotonous scenery of residential complexes. They also show a high level of visual awareness with the distinctive shapes made possible when new elements are added to a historical exterior. Finally, circular multi-family housing with courtyards in the center prompt social contact between inhabitants, especially with dormitories and rental houses for the low-income bracket, which provide a small individual units with high use common space. Circular multi-family housing are planned in a manner similar to a small village or a city. They are designed to enhance sense of community, allocating various public amenities and provide cultural and commercial spaces on the ground floor and courtyard areas.