• 한국구조물진단유지관리공학회 논문집
• /
• 제8권2호
• /
• pp.247-258
• /
• 2004

복합적층 곡선패널의 비감쇠 강제진동문제를 해결하기 위한 쉘 요소를 제안하였다. 본 연구에서는 절점당 6개의 자유도를 갖는 4절점 EAS 쉘요소를 사용하였다. EAS 방법을 이용하여 전단잠김과 면내잠김 현상을 극복하였으며, 전단보정계수를 사용하지 않고 분포형상함수에 의해 두께방향에 따른 전단변형을 포물선으로 분포시킨 수정된 1차전단변형이론을 적용하였다. Newmark 직접적분법이 시간에 관한 운동방정식의 적분과 시간이력을 해결하기 위해 적용되었다. 곡선패널의 기하학적 조건과 화이버 보강각도 및 적층조건 등의 매개변수 변화에 따른 강제진동응답을 분석하였다.

• 한국기계가공학회지
• /
• 제19권11호
• /
• pp.29-34
• /
• 2020

In this study, a sensitivity formulation was applied to analyze the dynamic response due to the effect of the excitation force for the undamped vibration of the cantilever beam. The theoretically fundamental formulations were derived considering an eigenvalue problem and its modal analysis to govern the second order algebraic differential equation in terms of the change in the modal coordinate with respect to the design parameters. A representative physical quantity pertaining to the dynamic response, that is, the rate of change in the dynamic displacement, was observed by changing the design variables, such as the cross-sectional area of the beam. The numerical results were obtained at various locations, considering the application of the external forces and observation of the dynamic displacement. When the detection position was closer to the free end of the cantilever beam, the sensitivity of the dynamic displacement was higher, as predicted through the oscillating motion of the beam. The presented findings can provide guidance to compute the dynamic sensitivity for a flexibly connected structure under dynamic excitations.

• Journal of Advanced Marine Engineering and Technology
• /
• 제14권2호
• /
• pp.35-47
• /
• 1990

The natural frequency of lateral vibration for ship's propulsion shafting tends to become lower as the relative stiffness of supproted system of the propulsion shafting decreases and the weight of shafting increases. Especially, the propulsion shafting of high-power ships such as car ferries, roll-on/roll-off, and container ships are susceptible to lateral vibration for their resonant speeds are happened to be in ordinary operating speed ranges. So far, many papers on the lateral vibration of ship's propulsion shaftings are published but they treated mainly special cases and not explained explicitly the calculation process. In this paper, the calculation processes of undamped and also forced damped lateral vibration by the transfer matrix method are presented and the calculation programs are developed. With the developed computer programs, a ship's propulsion shafting which was introduced on the published paper is analyzed for its lateral vibration and also the lateral vibration of the main drive shaft for a lathe is calculated to show the availiability of developed computer programs.

• 대한기계학회논문집
• /
• 제12권2호
• /
• pp.193-199
• /
• 1988

본 연구의 목적은 SCPA방법을 이용한 비선형 2자유도 비감쇠계의 해석을 통하여 응답곡선을 구하고, 그 응답곡선의 분기현상을 규명함에 있다. 결과의 비교를 위하여 4차의 Runge-Kutta방법을 이용한 수치실험을 수행하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1996년도 춘계학술대회논문집; 부산수산대학교, 10 May 1996
• /
• pp.177-183
• /
• 1996

By utilizing the concept of normal modes, nonlinear dynamics is studied on pendulum dynamic absorber. When the spring mode loses the stability in undamped free system, a dynamic two-well potential is formed in Poincare map. A procedure is formulated to compute the forced responses associated with bifurcating mode and predict double saddle-loop phenomenon. It is found that quasiperiodic motion and stable periodic motion coexist in some parameter ranges, and only periodic motions or rotation of pendulum with chaotic fluctuation are observed in other ranges.