• Korean journal of applied entomology
• /
• v.16 no.4 s.33
• /
• pp.211-215
• /
• 1977

The Sporulation of Didymella bryomiae were observed under diurnal cycles of light/darkness of near ultraviolet light (NUV) and artificial daylight (ADL) and continous darkness in eight isolates growing on PDA and V-8 juice agar. Light stimulated pycindial and perithecial formation of this fungus on potato dextrose agar and V-8 juice agar. Sprulation was poor in darkness, but some isolates were able to produce pycnidia and perithecia in the absence of light. Perithecial formation was much better under artificial daylight (ADL) on V-8 juice agar than those grown under near ultraviolet light (NUV). In general, cultures grown on V-8 juice agar sporulated better than cultures grown on PDA under three setsof light condition. Most of the pycnidiospores obtained from each isolates of this fungus grown on PDA were non-septate and microtype, but macrotype of non-septate and uniseptate pycnidiospores were produced on V-8 juice agar. Pycnidiospore produced on V-8 juice agar were similar to those produced on the radicle of naturally infected seeds. The appearance of perithecia were quite distinctive from pycnidia. The mature perithecia were darker than pycnidia and whitish spore masses formed on the ostiole of perithecia.

• Applied Microscopy
• /
• v.28 no.2
• /
• pp.127-137
• /
• 1998

This study was observed of the skin that changed after irradiation of the ultraviolet A. All the mouse were hairless which the weight are about 25g and the ages $6\sim8$ weeks old. The mouse were divided into six groups; control, irradiated for 6 hours, 3 days, 7 days, 14 days, 21 days and 28 days. Each group was irradiated with ultraviolet that is $320nm\sim366nm$ of wavelengths. After irradiated, the skin was observed with the electron microscope and the light microscope. The results are as follow: 1) Light microscopy With following irradiation, the epidermis was not changed to most groups but at the 28 days group was thickened and deposit the melanocyte. The elastic fibers within the epidermis were thickened and twisted with following irradiation. 2) Eelectron microscopy The elastic fibers were slightly clumped at 6 hours group, mildly increased and partly aggregated in the 3 days group, branched and tangled at 7 days group, irregulated and electron density at 14 days group, sightly thickened and twisted at 21 days group, and randomly arranged, shortened, twisted, and electron density at 28 days group.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.29 no.3
• /
• pp.123-131
• /
• 2019

In this study, the development of transparent UV blocking material using $TiO_{2-x}$ oxide thin film process was developed. A process technology is related to a process technology for making a sample with ultraviolet-shielding property of visible light transmittance of 78 % or more (total light transmittance at 550 nm) and of a UV cut-off characteristic of more than 95 % at 315 nm in ultraviolet wavelength band. In this study, it is possible to establish a flexible device process condition of high performance ultraviolet (UV) shielding thin film, to design mixed type of transparent flexible device with heterogeneous characteristics and to formulate composite deposition technology, according to various market demands. Establishment of actual roll-to-roll continuous process and equipment and process technology will affect related industries greatly.

• Safety and Health at Work
• /
• v.8 no.3
• /
• pp.237-245
• /
• 2017

Background: Solar furnaces are used worldwide to conduct experiments to demonstrate the feasibility of solar-chemical processes with the aid of concentrated sunlight, or to qualify high temperature-resistant components. In recent years, high-flux solar simulators (HFSSs) based on short-arc xenon lamps are more frequently used. The emitted spectrum is very similar to natural sunlight but with dangerous portions of ultraviolet light as well. Due to special benefits of solar simulators the increase of construction activity for HFSS can be observed worldwide. Hence, it is quite important to protect employees against serious injuries caused by ultraviolet radiation (UVR) in a range of 100 nm to 400 nm. Methods: The UV measurements were made at the German Aerospace Center (DLR), Cologne and Paul-Scherrer-Institute (PSI), Switzerland, during normal operations of the HFSS, with a high-precision UV-A/B radiometer using different experiment setups at different power levels. Thus, the measurement results represent UV emissions which are typical when operating a HFSS. Therefore, the biological effects on people exposed to UVR was investigated systematically to identify the existing hazard potential. Results: It should be noted that the permissible workplace exposure limits for UV emissions significantly exceeded after a few seconds. One critical value was strongly exceeded by a factor of 770. Conclusion: The prevention of emissions must first and foremost be carried out by structural measures. Furthermore, unambiguous protocols have to be defined and compliance must be monitored. For short-term activities in the hazard area, measures for the protection of eyes and skin must be taken.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.31 no.5 s.164
• /
• pp.659-669
• /
• 2007

The purpose of this study was to investigate the degradation of silk fabrics dyed with gardenia and sappanwood by Ultraviolet Light(UV). To asses the effect of uv on dyed silk fabrics, physical and chemical properties of samples were explored. K/S value rapidly decreased with increasing exposure time. Mordanting improved ultraviolet-cut ability and the sappanwood dyed samples were superior to those of gardenia dyed in ultraviolet-cut ability. Color progressively faded away as uv exposure time increased, accordingly, $L^*,\;a^*,\;b^*$, H/VC, ${\Delta}E$ were changed. Morphological change observed with SEM represented degradation of silk fabrics from the outer fibril to the inner fibril. Tensile Strength abruptly decreased as uv exposure time increased and the mordanted samples showed higher tensile strength than the unmordanted. FT-IR analysis confirmed that main peaks at 3297 and $1704cm^{-1}$ band for silk fabric were due to N-H and C=O stretching, gardenia peaks at 1654 and $668cm^{-1}$ band representing C=O(ester), C=C(alken) and O-C=O(carboxylic acids) of crocin and sappanwood peaks at $1715cm^{-1}$ band representing C=O(cyclic keton) of brazilin appeared on the samples exposed for 14 days, but these peaks indicating colorants after 28 days of uv exposure faded away due to prolonged exposure of uv.

• Proceedings of the KIPE Conference
• /
• 2001.10a
• /
• pp.89-92
• /
• 2001

Silent gas discharge method has been widely applied for ozone production, ultraviolet light and UV laser generation. Since ozone and ultraviolet applications have tendency to spread widely in industry, the development of efficient and low-cost power supply for such systems is a task of great impotency. This paper introduces high-frequency inverter type mode power supply designed for ozone generation tube and ultraviolet generation excimer lamp and considerations on this inverter and pulse density modulation control strategy applied in it.

• Textile Coloration and Finishing
• /
• v.23 no.3
• /
• pp.187-194
• /
• 2011

This study used Jeju scoria to dye cotton fabric and measured its dyeability, colorfastness, antibacterial activity, deodorization efficiency, ultraviolet protection, and far-infrared emission. The cotton fabric was colored to yellowish red and optimal dyeing can be achieved at a temperature of $80^{\circ}C$ for a dyeing time of 120 minutes with a colorant concentration of 25%(o.w.b). The colorfastness to light, rubbing, perspiration, and washing was 8, 5, 5, and 4~5 ratings respectively, where the wash colorfastness remained after 15 wash cycles. The cotton fabric dyed with Jeju scoria demonstrated excellent antimicrobial activity to Staphylococcus aureus and high deodorization efficiency. Ultraviolet protection factor was as high as 50+. The Jeju scoria can be used as a new colorant for the natural dyeing of silk.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.8 no.2
• /
• pp.23-27
• /
• 2002

Reballasting at sea, as recommended by the IMO guidelines, currently provides the best-available measure to reduce the risk of transfer of harmful aquatic organisms, but is subject to serious ship-safety limits. It is therefore extremely important that alternative, effective ballast water management and treatment methods are developed as soon as possible, to replace reballasting at sea. Filtration-Ultraviolet radiation-Electrolytic process (FUE) was evaluated for disinfection of seawater used In ballast water Optimal current density and UV light intensity were 2.0A/dm$^2$ and, 220㎼/$\textrm{cm}^2$/m with which 100% reduction time was 2sec in a Ultraviolet radiation-Electrolytic process. This study showed that FUE process was effective for the disinfection of commonly isolated bacteria and bacillus from ballast water.

• Journal of Power Electronics
• /
• v.2 no.3
• /
• pp.206-211
• /
• 2002

Silent gas discharge method has been widely applied fur ozone production, ultraviolet light and UV laser generation. Since ozone and ultraviolet applications have tendency to spread widely in industry, the development of efficient and low - cost power supply for such systems is an important task at present. This paper introduces high-frequency inverter type mode power supply designed fur ozone generation tube and ultraviolet generation excimer lamp and considerations on the design of the inverter and pulse density modulation control strategy applied in it.

• Journal of Sensor Science and Technology
• /
• v.16 no.4
• /
• pp.307-312
• /
• 2007

The films of Er-doped ZnO (ZnO:Er) were prepared onto MgO wafers by ultrasonic spray pyrolysis at $550^{\circ}C$. The concentration of Er in the deposition source varied from 0.5 wt% to 3.0 wt%. The crystallographic properties and surface morphologies of the films were investigated by X-ray diffraction (XRD) and scanning electron microscope (SEM), respectively. The properties of photoluminescence (PL) for the films were investigated by dependence of PL spectra on the Er concentration in the films. The films were grown as polycrystalline with a dominant direction of [002]. The grain size of the films were reduced by Er-doping. Er-doping enhanced the ultraviolet emission of ZnO:Er films. The ZnO:Er films prepared with the deposition source of 2.0 wt% Er showed the strongest ultraviolet light emission peak among the films in this study.