• 한국기계가공학회지
• /
• 제12권6호
• /
• pp.23-29
• /
• 2013

In this paper, pure $I_{ph}$ and hybrid carbon nanotube reinforced $I_{ph}$ were sintered using the SPS(spark plasma sintering) method for high densification. A nanosecond laser (${\lambda}=1063nm$, ${\tau}P=10ns$) and a femtosecond laser (${\lambda}=1027nm$, ${\tau}P=380fs$) were installed on an optical system for the micromachining test. The ablation characteristics of the pure $I_{ph}$ and CNT/$I_{ph}$ composites, such as thermal effect and ablation depth, were investigated using FE-SEM and a confocal microscope device. Laser machining results for the two mating materials showed improved performances: CNT/$I_{ph}$ composites showed good surface morphology of hole drilling without a melting zone due to the composites' high thermal properties; also, the ablated depth of CNT/$I_{ph}$ was higher than that of pure $I_{ph}$.

• 전기전자학회논문지
• /
• 제9권2호
• /
• pp.115-122
• /
• 2005

모드잠금 고리형 광섬유 레이저 출력의 단열 쏠리톤 펄스압축에 의해 $1545{\sim}1550\;nm$ 파장영역에서 400 ??토초의 안정성이 뛰어난 변환제한급의 10 GHz의 광 펄스를 발생시켰다. 특별한 슈퍼모드 선택소자를 사용하지 않고도 -123 dB/Hz 이하의 슈퍼모드 비팅 잡음 억제에 의해 $1\;kHz{\sim}100\;MHz$의 잡음대역에서 100 ??토초 미만의 낮은 시간 지터를 얻었다.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2002년도 하계학술발표회
• /
• pp.230-231
• /
• 2002

Recently, analysis of transient Raman backscattering in a plasma reported(2.3) that it is possible to reach 10$\^$17/ W/cm$^2$ for 1 micrometer wavelength laser pulse with a counter-propagating pump pulse. The basic mechanism is like this ： whorl the two counter-propagating waves in a plasma satisfy the condition of Raman backscattering, w$\_$0/ ： w$\_$1/ ＋ w$\_$p/, energy is transferred from the long pulse to the short pulse via three wave interaction(4). (omitted)

• Bulletin of the Korean Chemical Society
• /
• 제24권8호
• /
• pp.1075-1080
• /
• 2003

We have investigated femtosecond coherent vibrational motions of Zn(II)-5,15-diphenylporphyrin in toluene using chirp-controlled ultrashort pulses. The oscillatory features superimposed on the temporal profiles of the pump-probe transient absorption signal are affected by the chirping and energy of excitation pulses. Using chirp- and excitation energy-controlled femtosecond pulses, we are able to obtain information on the structural changes between the electronic ground and excited states based on a comparative analysis of the Fouriertransformed frequency-domain spectra retrieved from the oscillatory components with the ground state resonance Raman spectra and normal mode calculations.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2003년도 추계학술대회
• /
• pp.356-361
• /
• 2003

Electrochemical micromachining which is not normally considered as a precision process is presented in this paper. The application of voltage Pulses between a tool electrode and a workpiece in an electrochemical environment allows the three-dimensional machining of conducting materials with micrometer precision. In this paper tool-electrodes($5\mu\textrm{m}$ in diameter, 1mm in length) are developed by electrochemical micromaching and micro holes are manufactured using this tool-electrodes we developed already. Micro holes are achieved the accuracy below $50\mu\textrm{m}$ in diameter using ultrashort voltage pulses(0.1-5$\mu\textrm{s}$).

• Journal of the Optical Society of Korea
• /
• 제12권3호
• /
• pp.186-191
• /
• 2008

A phase retrieval method using an error reduction algorithm is developed for reconstructing a wavefront aberration of an 100-TW Ti:sapphire laser pulse from the measurement of a focal spot. The phase retrieval method can successfully reconstruct a wavefront aberration of a 100-TW Ti:sapphire laser pulse, and the reconstructed wavefront aberration shows a good agreement with the wavefront aberration measured with a wavefront sensor. The effect of the dynamic range and the intensity noise on the reconstruction is also investigated in reconstructing a wavefront aberration of an 100-TW Ti:sapphire laser pulse.

• 한국광학회지
• /
• 제2권4호
• /
• pp.197-202
• /
• 1991

극초단 레이저 펄스의 펄스폭(pulse width)을 측정하기 위하여 SHG방법을 이용한 실시간(real time) 자기상관계(autocorrelator)를 개발하였다. 본 연구에서 개발한 자기상관계의 측정법위는 142 ps이며, 지연(delay) block을 한쪽 arm에 삽입하면 250ps까지 측정범위가 확장된다. CW mode-locked Nd:YLF 레이저의 공진기 길이가 mode-locker의 RF 주파수와 matching 되었을 때 가장 짧은 20ps의 펄스폭을 측정하였으며, 공진기 길이를 detuning함에 따란 39ps와 47ps의 펄스폭을 측정 하였다.

• 한국산업융합학회 논문집
• /
• 제20권4호
• /
• pp.307-311
• /
• 2017

Ultra short pulse laser processing with the PI (polyimide) substrate is conducted to increase flexibility and radius of curvatures. A femtosecond laser is used to perform micro machining by minimizing the heat effect in PI substrate. The laser processing according to the parameters, such as fabricated line width, depth, laser power, distance between lines, is carried out to understand the characteristics of fabricated lines. A bending test is carried out to evaluate bending shapes and the radius of curvature after bending and spreading it 1000 times. The results demonstrates that the radius of curvature decreases in deepen lines and increases with the augment of the number of the fabricated lines, and distance between lines.

• 한국광학회지
• /
• 제5권4호
• /
• pp.466-472
• /
• 1994

아르곤 레이저에 의해 광펌핑 되는 티타늄 사파이어 레이저를 제작하고 이를 자체 모드록킹 시켰다. 모드록킹은 볼 슬라이더 위에 장착된 공진기 거울의 이동에 의해 시작되었으며 티타늄 사파이어 결정내의 자체 집속 효과와 공진기내에 설치된 조리개에 의해 모드록킹이 유지 되었다. 공진기내의 군속도를 보상하기 위하여 프리즘쌍을 사용하였으며, 모드록킹된 펄스의 대역폭은 11nm, 펄스폭은 $1000\pm20fs$였다.

• 대한전자공학회논문지SD
• /
• 제39권6호
• /
• pp.8-18
• /
• 2002

본 논문에서는 π의 위상천이를 얻기 위해 솔리톤펄스열(soliton pulse-train)에 의한 다중충돌방법과 광섬유접합(fiber-splicing)에 의한 다중충돌방법을 사용하는 전광위상천이스위치(all-optical phase-shift switch)에서 백 펨토초(femtosecond)이하의 펄스폭을 가지는 두 극초단 직교펄스간의 복잡한 비선형상호작용을 비선형라만응답함수를 고려하여 연구하였다. 또한 이러한 전광스위치에서 입사펄스의 시간폭의 변화와 광섬유의 복굴절률의 변화에 따른 스위칭특성을 분석함으로 해서 π의 위상천이를 얻기 위한 최적의 초기조건을 찾을 수 있었다.