• Transactions on Electrical and Electronic Materials
• /
• v.17 no.4
• /
• pp.183-188
• /
• 2016

This paper presents the design and characterization of wide band ohmic microswitch with an actuation voltage as low as 20~25 V, and a restoring force of 14.1 μN. The design of the proposed switch is primarily composed of an electrostatic actuator, bridge membrane, cantilever (beam) and coplanar waveguide, suspended over the substrate. The analysis shows an insertion loss of −0.002 dB at 1GHz and remains as low as −0.35 dB, even at 100 GHz. The isolation loss of the switch is sustained at −21.09 dB at 100GHz, with a peak value of −99.58 dB at 1 GHz and up-state capacitance of 4 fF. To our knowledge, this is the first demonstration of a series contact switch, which works over a wide bandwidth (DC-100 GHz) and with such a high and sustained isolation, even at high frequencies and with an excellent figure of merit (f_c=1/2.pi.Ron.Cu= 39.7 THz).

• Review of KIISC
• /
• v.33 no.4
• /
• pp.13-22
• /
• 2023

Controller area network (CAN) 네트워크로 대표되는 자동차 내부네트워크와 비교하여 자동차 스마트키 시스템은 상대적으로 소수의 연구가 진행되어오고 있다. 하지만, 현실 세계에서는 스마트키 시스템의 취약점으로 인해 많은 피해사례가 발생하고 있다. 대표적으로, 2010년 NDSS 학회에 소개된 신호 중계 공격 (signal relay attack)은 현재까지도 수많은 자동차 절도 사건들에 악용되고 있다. 이와 같은 문제를 근본적으로 해결하기 위해 초광대역 통신(ultra-wideband communication, UWB)을 사용한 디지털 키 (Digital Key) 기술이 일부 최신 자동차들에 탑재되고 있다. 하지만, 2022년USENIX Security 학회에서 애플, 삼성과 같은 글로벌 기업이 채택한 high rate pulse repetition frequency (HRP) UWB 측위 시스템에 대한 거리 단축 공격 (distance reduction attack)이 가능함이 소개되었다. 이는 디지털 키 시스템 또한 신호중계 공격과 같은 보안 위협에 노출될 수 있다는 점을 시사한다. 본 논문에서는 자동차 스마트키 시스템을 대상으로 수행된 공격 연구 사례들을 살펴본다. 먼저, remote keyless entry (RKE) 시스템 및 passive keyless entry and start (PKES) 시스템으로 대표되는 기존 스마트키 시스템을 대상으로 하는 보안 위협에 대해 살펴본다. 다음으로 차세대 스마트키 시스템으로 주목받고 있는 디지털키 시스템을 구성하는 초광대역 통신기술의 동작 원리 및 이에 대한 보안위협 연구 동향을 살펴본다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2021.05a
• /
• pp.263-266
• /
• 2021

근래의 드론 산업은 다양한 분야에서 사용이 확대되고 있으나 규제 등 여러 가지 사회적 진입장벽으로 시장 진입에 애로사항이 도출되고 있다. 본 논문에서는 드론 산업의 여러 제약 중 배터리의 제한적인 용량으로 장시간 비행이 어려운 문제를 개선하고자 승강식 드론스테이션을 개발하였다. 승강식 드론스테이션은 드론의 비행 중 배터리가 방전될 시 충전 및 정비를 할 수 있고, 드론 간의 통신 중계기 역할을 수행한다. 본 논문에서는 스테이션에 드론이 접근 시 슬라이딩 도어를 개폐하기 위하여 초광대역 통신을 이용한 거리 측정과 위치 인식 시스템에 대한 내용을 기술하였다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.10a
• /
• pp.472-473
• /
• 2021

The frequency-hopping sequence is a type of user-specific code that has been used in various ways in military communication, Bluetooth, and ultra-wideband communications. In a practical communication environment, a frequency-hopping sequence with an alphabet and a length suitable for the number of available frequencies and transmission period is required. Therefore, the design of the frequency-hopping sequence having various parameters is a very important problem in frequency-hopping spread-spectrum communication. To this end, this paper explores a method of synthesizing a sequence of a new length through the synthesis of existing frequency-hopping sequences. As a result, it is possible to present the possibility of frequency-hopping sequences applicable to various environments of communications.

• ETRI Journal
• /
• v.46 no.2
• /
• pp.218-226
• /
• 2024

This paper presents a novel circular fractal ring monopole antenna for ultra-wideband (UWB) hardware with dual band-notched properties. The proposed antenna consists of four crescent-shaped nested rings, a tapered feeding line at the front of the dielectric material, and a semicircular ground plane on the backside. In this design, the nested rings are used both as a radiation element and a band rejection element. The proposed antenna has a bandwidth of 9.03 GHz, which works efficiently in the range of 2.63 GHz-11.66 GHz with the dual notched bands of Worldwide Interoperability for Microwave Access (WiMAX) at 3.15 GHz-3.66 GHz and wireless local area network (WLAN) at 4.9 GHz-5.9 GHz, respectively. The antenna has a compact size of 20 mm × 30 mm × 1 mm (0.177 × 0.265 × 0.0084 λ0) and is implemented using a flame-retardant type 4 (FR4) material. It has a maximum gain of approximately 4 dB in its operating range, and experimental results support the simulation predictions with high accuracy. The findings of this study imply that the designed antenna can be utilized in UWB applications.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.12
• /
• pp.3600-3607
• /
• 2009

This paper describes the development of a power sensor for wireless signal over the ultra wideband range of 300~3800MHz with the detecting range of 150mW~150W. The proposed power sensor fundamentally has the function of not only detecting wireless power, but recognizing frequency and measuring VSWR. The development of the power sensor is completed through the design of dual directional coupler, design of power detector block which produces DC data using the corresponding RF input power level, and establishment of collecting the exact calibration data. The dual directional coupler has the operating frequency of 300~3800MHz with the 0.085dB of insertion loss, and directivity of 30dB at least at 3800MHz. The developed power sensor has the capability of power sensing with less than 0.25dB of resolution as well as measuring VSWR of 1.17~1.96 under the practical operating situation of very high power up to 150W at 300~3800MHz.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.8
• /
• pp.42-50
• /
• 2007

This paper presents design methods for dual-frequency(2.4/5.8GHz) active receiving antennas. The proposed active receiving antennas are designed to interconnect the output port of a wideband antenna to the input port of an active device of High Electron Mobility Transistor directly and to receive RF signals of 2.4GHz and 5.2GHz simultaneously where the impedance matching conditions are optimized by adjusting the length of $1/20{\lambda}_0$(@5.8GHz) CPW transmission line in the planar antenna The bandwidth of implemented dual-frequency active receiving antennas is measured in the range of 2.0GHz to 3.1GHz and 5.25GHz to 5.9GHz. Gains are measured of 17.0dB at 2.4GHz and 15.0dB at 5.2GHz. The measured noise figure is 1.5dB at operating frequencies.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.1
• /
• pp.27-35
• /
• 2013

In this paper, a compact, broadband quasi-Yagi antenna utilizing balance analysis of the ultra-wideband microstrip-to-coplanar stripline(MS-to-CPS) balun is proposed. The antenna size was reduced by removing the reflector on bottom layer and ground plane is used as a reflector. A planar balun that transforms from microstrip(MS) to balanced coplanar stripline(CPS) is characterized in the amplitude and phase imbalances at CPS output ports are investigated and discussed. As compared with the conventional balun, the proposed MS-to-CPS balun demonstrated very wideband performance from 7 to over 20 GHz. From the simulation study, amplitude and phase imbalances are within 1 dB and ${\pm}5^{\circ}$, respectively. The implemented antenna provides very wide bandwidth from 6.9 to 15.1 GHz(74.5 %). The gain of the antenna is from 3.7 to 5.5 dBi, the front-to-back ratio is more than 10 dB, and the nominal radiation efficiency is about 94 %.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.1
• /
• pp.28-35
• /
• 2010

In this paper, we designed and fabricated a ultra-wideband(UWB) bandpass filter with a good performance of a stopband, and a notched band in passband. The transformed equivalent circuit of the highpass filter was realized by distributed element. A wide-passband with 3-dB fractional bandwidth of more than 100 % was achieved by using optimum response of the HPF. For improving lower and upper stopband characteristic, a cross coupling between feed lines was employed, which was analyzed by desegmentation technique. In order to reject interference of Wireless LAN and Hyper LAN(5.15~5.825 GHz), the narrow notched(rejection) band was realized by a spurline. The fabricated BPF indicated the passband from 3.1 to 10.55 GHz and the flat group delay of less than 0.94 ns over the entire passband except the rejection band. The filter shown sharp attenuation both inside and outside the band and notched band from 5.2 to 6.12 GHz.

• Journal of IKEEE
• /
• v.2 no.1 s.2
• /
• pp.1-14
• /
• 1998

In this paper, Antenna, LNA, Mixer, VCO, and Modulation/Demodulation in Baseband processor which are the RF main components in Wireless LAN system for ultra high-speed communications network are studied. Antenna bandwidth and selective fading due to multipath can be major obstacles in high speed digital communications. To solve this problem, wide band MSA which has loop-structure magnetic antenna characteristics is designed. Distributed mixer using dual-gate GaAs MESFET can achieve over 10dB LO/RF isolation without hybrid, and minimize circuit size. As linear mixing signal is produced, distortions can be decreased at baseband signals. Conversion gain is achieved by mixing and amplification simultaneously. Mixer is designed to have wide band characteristics using distributed amplifier. In VCO design, Oscillator design method by large signal analysis is used to produce stable signal. Modulation/Demodulation system in baseband processor, DS/SS technique which is robust against noise and interference is used to eliminate the effect of multipath propagation. DQPSK modulation technique with M-sequences for wideband PN spreading signals is adopted because of BER characteristic and high speed digital signal transmission.