• Journal of Hydrogen and New Energy
• /
• v.21 no.6
• /
• pp.580-586
• /
• 2010

Acid and alkali pretreatments were applied to tofu processing waste (TPW) to increase the solubility of ingredients in TPW. Pretreatment at 1.0% of HCl and 2.5% of NaOH condition resulted in the increase of SCOD concentration from 3.2 g COD/L to 27 g COD/L and 33 g COD/L, respectively. The acid and alkali-pretreated TPW was studied for its fermentative $H_2$ production capacity in batch mode using a thermophillic mixed culture. Alkali pretreatment on presence of 2.5% NaOH exhibited more soluble portion released compared to acid pretreatment using HCl, however the $H_2$ production from acid pretreated TPW was better than alkali-pretreated TPW probably due to the sodium inhibition on microbial activity. In addition, sewage sludge was externally added to the acid-pretreated (1.0% HCl) TPW by 20% (on volume basis). Average H2 production rate was increased from 31 to 78 ml/L-broth/hr, and it was attributed to the high buffer capacity and abundant nutrients especially divalent cation in sewage sludge.

• Composites Research
• /
• v.33 no.5
• /
• pp.262-267
• /
• 2020

With increasing demands for high-speed machining and lightweight design of machine tools, increasing likeliness of generation of machine tool spindle vibrations has become an important issue. Spindle vibration has a significant impact on the surface finish of the workpiece in ultra-precision machining. It is necessary to resolve the machine tool spindle vibration in various machining processes to improve machining accuracy. In this paper, a TiC-SKH51 metal-matrix composite was used to suppress the vibration of the machine tool spindle. To confirm the dynamic characteristic of the TiC-SKH51 composite, impact hammer tests were conducted. After verifying the reliability of a finite element analysis (FEA) by comparing the results of the impact hammer test with the modal analysis using FEA, the analysis of the machine tool spindle model was performed. The FEA results show that the TiC-SKH51 composite applied machine tool spindle can be utilized to suppress the vibration generation.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.2
• /
• pp.618-629
• /
• 1991

The purpose of this experiment is to understand the distribution of coal particles inside CWM droplet which is believed to be a very important factor controlling the flame stability. CWM slurry is atomized by an air assisted twin fluid nozzle. An experimental rig is designed and fabricated. The mean size of coal particle distribution in CWM slurry, atomizing air pressure, coal particle loading in slurry and sampling position inside spray are main experimental variables. The atomized CWM droplets are sampled on the thin white layer of magnesium oxide by the emergency sampling shutter. The sampled coal particles on magnesium oxide layers are collected into test tubes and dispersed completely by Ultra-Sonicator. The size distribution of coal particles inside droplets are measured by Coulter Counter. The presence of coal particle inside the impressions of droplets on magnesium oxide layer are investigated by photo technique. There are quite many droplets which do not have any coal particles. Those are just water droplets, not CWM droplets. The population ratio of droplets without coal particles to toal number of droplets is strongly affected by the mean size of coal particle distribution in slurry and this ration becomes bigger number as the mean size of coal particles be larger. The size distribution of coal particles inside CWM droplets is not even and depends on the size of droplet. Experimental results show that the larger CWM droplets has droplets has bigger mean value of particle size distribution. This trend becomes more evident as the atomizing air pressure is raised and the mean size of coal particles in CWM slurry is bigger. That is, the distribution of coal particles inside CWM dropolets is very much affected by the atomizing air pressure and the mean size of pulverized coal particles in CWM slurry.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.1
• /
• pp.103-110
• /
• 2010

In this study, an assessment method on creep-fatigue crack initiation and crack growth for a Mod.9Cr-1Mo steel (ASME Grade 91) structure has been developed with an extension of the French RCC-MR A16 procedure. The current A16 guide provides defect assessment procedure for a creep-fatigue crack initiation and crack growth for an austenitic stainless steel, but no guideline is available yet for a Mod.9Cr-1Mo steel which is now widely being adopted for structural materials of future nuclear reactor system as well as ultra super critical (USC) thermal plant. In the present study an assessment method on creep-fatigue crack initiation and crack growth is provided for the FMS (Ferritic-Martensitic Steel) and assessment on the creep-fatigue crack behavior for a structure has been carried out. The assessment results were compared with the observed images from a structural test.

• Journal of Engineering Education Research
• /
• v.3 no.1
• /
• pp.3-11
• /
• 2000

HALS (Hypermidia Aided Learning System) is very useful computer networking educational system in knowledge-driven society, and has been developed by Kyungwon University. This system has three characteristics; 1) face-to-face learning, 2) ultra high-speed information networking, 3) web-based hypermedia courseware. So, the purpose of this paper is to introduce the application to engineering educational program (electrical engineering: electric power system, control system). For this purpose it is described the definition and characteristics of HALS. Next, it is represented the model of electrical engineering educational program applied to HALS and the developed courseware.

• Journal of Sensor Science and Technology
• /
• v.15 no.3
• /
• pp.216-221
• /
• 2006

ZnO thin films prepared by PLD method exhibit an excellent optical property, but may have some problems such as incomplete surface roughness and crystallinity. In this study, undoped ZnO buffer layers were deposited on (0001) sapphire substrates by ultra high vacuum pulse laser deposition (UHV-PLD) and molecular beam epitaxy (MBE) methods, respectively. After post annealing of ZnO buffer layer, undoped ZnO thin films were deposited under different oxygen pressure ($35{\sim}350$ mtorr) conditions. The Arsenic-doped (1, 3 wt%) ZnO thin layers were deposited on the buffer layer of undoped ZnO by UHV-PLD method. The optical property of the ZnO thin films was analyzed by photoluminescence (PL) measurement. The ${\theta}-2{\theta}$ XRD analysis exhibited a strong (002)-peak, which indicates c-axis preferred orientation. Field emission-scanning electron microscope (FE-SEM) revealed that microstructures of the ZnO thin films were varied by oxygen partial pressure, Arsenic doping concentration, and deposition method of the undoped ZnO buffer layer. The denser and smoother films were obtained when employing MBE-buffer layer under lower oxygen partial pressure. It was also found that higher Arsenic concentration gave the enhanced growing of columnar structure of the ZnO thin films.

• Applied Chemistry for Engineering
• /
• v.24 no.2
• /
• pp.155-160
• /
• 2013

Research on mutant generation and isolation for microalgae yielding enhanced lipid accumulation is an important issue for the production of economic biodiesel. In the present study, ultraviolet (UV-B type) ray induced mutant generation was tried using a photosynthetic microalgae, Nannochloropsis oculata (N. oculata), for the production of biodiesel. The resulting colonies were isolated and further cultured with both liquid and solid state f/2 media. After a few week cultivation, changes of cell growth rate, dry cell weight, and several important intracellular components (chlorophyll, carotenoid, and lipid) were investigated. Two mutants among thousands colonies showed an increased cell growth and high lipid accumulation as compared to those of wild type. It was also observed that the increased cell growth rate is associated with the overexpressed intracellular proteins. However, the mutants showed a decrease in the chlorophyll biosynthesis.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.20 no.3
• /
• pp.88-97
• /
• 2012

To measure the traffic pollutants with high temporal and spatial resolution under real conditions, a mobile emission laboratory (MEL) was designed. The equipment of the mini-van provides gas phase measurements of CO, NOx, CO2 and THC (Total hydrocarbon), and number density & size distribution measurements of fine and ultra-fine particles by a fast mobility particle sizer (FMPS) and a condensation particle counter (CPC). The inlet sampling port above the bumper enables the chasing of different type of vehicles. This paper introduces the technical details of the MEL and presents data from the experiment in which a MEL chases a city bus fuelled by diesel, DME and Bio-diesel. The dilution ratio was calculated by the ratio of ambient NOx and tail-pipe NOx. Most particles from the bus fuelled by diesel were counted under 300 nm and the peak concentration of the particles was located between 30 and 60 nm. However, most particles in the exhaust of the bus fuelled by DME were nano-particles (diameter: less than 50 nm). The bus fuelled by Bio-diesel shows less particle emissions compare to diesel bus due to the presence of the oxygen in the fuel.

• Food Science of Animal Resources
• /
• v.35 no.2
• /
• pp.197-204
• /
• 2015

This study was performed to investigate the effect of palm or coconut solid lipid nanoparticles (PO-SLNs or CO-SLNs) on growth of Lactobacillus plantarum (L. plantarum) in milk during storage period. The PO or CO (0.1% or 1.0%) was dispersed both in distilled water (DW) and ultra high temperature milk (UHTM), and subsequently emulsified with Tween^® 80 by ultrasonication (30% power, 2 min). Increase in particle size and encapsulation efficiency (EE%) in DW was observed with an increase in oil concentration, whereas a decrease in ζ-potential of SLNs was noted with an increment in oil concentration. Moreover, the CO-SLNs exhibited relatively smaller particle size and higher EE% than PO-SLNs. The CO-SLNs were found to be more stable than PO-SLNs. Higher lipid oxidation of PO or CO-SLNs in UHTM was observed during the storage test, when compared to PO or CO-SLNs in DW. However, there was no remarkable difference in lipid oxidation during storage period (p>0.05). In the growth test, the viability of L. plantarum in control (without PO or CO-SLNs in DW) exhibited a dramatic decrease with increasing storage period. In addition, viability of L. plantarum of PO or COSLNs in UHTM was higher than that of SLNs in DW. Based on the present study, production of SLNs containing PO or CO in UHTM is proposed, which can be used in lactobacilli fortified beverages in food industry.

• Journal of Veterinary Clinics
• /
• v.28 no.4
• /
• pp.394-398
• /
• 2011

Mesenchymal stem cells (MSC) are pluripotent cells that can be found in umbilical cord blood from new borne babies as well as placenta, bone marrow, adipose tissue, amniotic fluid, muscle, et al. MSC are capable of renewing themselves without differentiation in long-term culture, also can be differentiated into various tissues under specific condition. Formulating a cryopreservation protocol for the MSC is required because these cells cannot survive for long periods under in vitro culture conditions and a new formulation of harmless cryoprotectant is needed for the direct injection of MSC into patients. The undifferentiated MSC were frozen with a vitrification solution of 40% ethylene glycol, 20% Ficoll-70 and 0.3M sucrose. The survival rate after thawing and their proliferation rate were examined and compared with slow rate cooling methods using dimethylsulfoxide (DMSO). The vitrification method showed high survival rate after thawing and proliferation capacity comparable to DMSO. It can be suggested that ultra-rapid cooling method by vitrification is reliable methods for long term preservation of MSC and the vitrification solution with ethylene glycol, Ficoll-70 and sucrose will be more beneficially used for direct transplantation of MSC into patients than DMSO solution.