Browse > Article
http://dx.doi.org/10.7234/composres.2020.33.5.262

Suppression of Machine Tool Spindle Vibration by using TiC-SKH51 Metal Matrix Composite  

Bae, Wonjun (School of Mechanical Engineering, Pusan National University)
Kim, Sungtae (School of Mechanical Engineering, Pusan National University)
Kim, Yangjin (School of Mechanical Engineering, Pusan National University)
Lee, Sang-Kwan (Composites Research Division, Korea Institute of Materials Science)
Publication Information
Composites Research / v.33, no.5, 2020 , pp. 262-267 More about this Journal
Abstract
With increasing demands for high-speed machining and lightweight design of machine tools, increasing likeliness of generation of machine tool spindle vibrations has become an important issue. Spindle vibration has a significant impact on the surface finish of the workpiece in ultra-precision machining. It is necessary to resolve the machine tool spindle vibration in various machining processes to improve machining accuracy. In this paper, a TiC-SKH51 metal-matrix composite was used to suppress the vibration of the machine tool spindle. To confirm the dynamic characteristic of the TiC-SKH51 composite, impact hammer tests were conducted. After verifying the reliability of a finite element analysis (FEA) by comparing the results of the impact hammer test with the modal analysis using FEA, the analysis of the machine tool spindle model was performed. The FEA results show that the TiC-SKH51 composite applied machine tool spindle can be utilized to suppress the vibration generation.
Keywords
Finite element analysis; Impact hammer test; Metal-matrix composite; Machine tool spindle; Vibration suppression;
Citations & Related Records
Times Cited By KSCI : 2  (Citation Analysis)
연도 인용수 순위
1 Arslan, M., Catay, B., and Budak, E., "A Decision Support System for Machine Tool Selection," Journal of Manufacturing Technology Management, Vol. 15, No. 1, 2004, pp. 101-109.   DOI
2 Awale, A.S., and Inamdar, K.H., "Review on High Speed Machining of Hard Material," Journal of Emerging Technologies and Innovative Research, Vol. 2, No. 3, 2015, pp. 517-524.
3 Sulitka, M., Novotny, L., Sveda, J., Strakos, P., Hudec, J., Smolik, J., and Vlach, P., "Machine Tool Lightweight Design and Advanced Control Techniques," MM Science Journal, 2008, pp. 30-34.
4 Zhang, S.J., To, S., Zhang, G.Q., and Zhu, Z.W., "A Review of Machine-tool Vibration and Its Influence upon Surface Generation in Ultra-precision Machining," International Journal of Machine Tools and Manufacture, Vol. 91, 2015, pp. 34-42.   DOI
5 Gagnol, V., Le, T.P., and Ray, P., "Modal Identification of Spindle-tool Unit in High-speed Machining," Mechanical Systems and Signal Processing, Vol. 25, No. 7, 2011, pp. 2388-2398.   DOI
6 Birk, F., Ali, F., Weigold, M., Abele, E., and Schutzer, K., "Lightweight Hybrid CFRP Design for Machine Tools with Focus on Simple Manufacturing," The International Journal of Advanced Manufacturing Technology, Vol. 108, 2020, pp. 3915-3924.   DOI
7 Zhang, S.J., To, S., Cheung, C.F., and Wang, H.T., "Dynamic Characteristics of an Aerostatic Bearing Spindle and Its Influence on Surface Topography in Ultra-precision Diamond Turning," International Journal of Machine Tools and Manufacture, Vol. 62, 2012, pp. 1-12.   DOI
8 Zhang, G.T., and Yin, Z.H., "The Lightweight Design of CNC Lathe Spindle Box Based on Topology Optimization," Applied Mechanics and Materials, Vol. 236-237, 2012, pp. 464-468.   DOI
9 Savilov, A.V., Pyatykh, A.S., and Timofeev, S.A., "Vibration Suppression Methods at High Performance Drilling," IOP Conference Series: Materials Science and Engineering, Vol. 632, 2019, pp. 012108.   DOI
10 Zhang, S.J., and To, S., "The Effects of Spindle Vibration on Surface Generation in Ultra-precision Raster Milling," International Journal of Machine Tools and Manufacture, Vol. 71, 2013, pp. 52-56.   DOI
11 Zaeh, M.F., and Roesch, O., "Improvement of the Static and Dynamic Behavior of a Milling Robot," International Journal of Automation Technology, Vol. 9, No. 2, 2015, pp. 129-133.   DOI
12 Wan, S., Li, X., Su, W., Yuan, J., Hong, J., and Jin, X., "Active Damping of Milling Chatter Vibration Via a Novel Spindle System with an Integrated Electromagnetic Actuator," Precision Engineering, Vol. 57, 2019, pp. 203-210.   DOI
13 Wang, M., Zan, T., Yang, Y., and Fei, R., "Design and Implementation of Nonlinear TMD for Chatter Suppression: An Application in Turning Process," International Journal of Machine Tools and Manufacture, Vol. 50, 2010, pp. 474-479.   DOI
14 Kono, D., Mizuno, S., Muraki, T., and Nakaminami, M., "A Machine Tool Motorized Spindle with Hybrid Structure of Steel and Carbon Fiber Composite," CIRP Annals - Manufacturing Technology, Vol. 68, No. 1, 2019, pp. 389-392.   DOI
15 Lee, B.G., and Choi, J.W., "A Study on Automation of Modal Analysis of a Spindle System of Machine Tools Using ANSYS," Journal of the Korea Academia-Industrial Cooperation Society, Vol. 16, No. 4, 2015, pp. 2338-2343.   DOI
16 Oh, N.R., Lee, S.K., Hwang, K.C., and Hong, H.U., "Characterization of Microstructure and Tensile Fracture Behavior in a Novel Infiltrated TiC-Steel Composite," Scripta Materialia, Vol. 112, 2016, pp. 123-127.   DOI
17 Cho, S., Lee, Y.H., Ko, S., Park, H., Lee, D., Shin, S., Jo, I., Lee, S.B., and Lee, S.K., "Microstructure and Properties of TiC-Inconel 718 Metal Matrix Composites Fabricated by Liquid Pressing Infiltration Process," Composite Research, Vol. 32, No. 3, 2019, pp. 158-162.
18 Kim, D.H., Lee, C.M., and Choi, H.J., "Static and Dynamic Analysis and Optimization Design of 40,000-rpm High-speed Spindle for Machine Tools," Transactions of the Korean Society of Mechanical Engineers A, Vol. 37, No. 1, 2013, pp. 105-111.   DOI
19 Lee, H.C., Kim, M.G., Go, G.Y., and Han, S.N., "A Study on the Static and Dynamic Stiffness of Lightweight Vehicle Body Pard Applied to High Strength Steel," Transactions of the Korean Society of Automotive Engineers, Vol. 27, No. 4, 2019, pp. 267-272.   DOI
20 Okada, H., Sahashi, H., Kim, I.S., Kang, C.Y., Igata, N., and Miyahara, K., "Effect of Epsilon Martensite on the Damping of High Strength Fe-Cr-Mn Alloys," Materials Science and Engineering A, Vol. 370, No. 1, 2004, pp. 519-523.   DOI