• 한국정밀공학회지
• /
• 제14권8호
• /
• pp.130-136
• /
• 1997

For compensating the error motion of hydrostatic guideways, we introduce a way that the clearance of table is actively controlled corresponding to the amount of error with the variable capillary. The structure and the theoretical design method of active controlled capillary using piezo actuator, named ACC, are proposed in this paper. Basic characteristics such as the maximum controllable range, micro step response and available dynamic bandwidth are tested for confirmation of structural suitability of ACC, and these characteristics are also tested on the table mounted with ACC for verifying the availability. The experimental result showed that by the use of ACC, the error motion within 2.7 .mu. m of a hydrostatic guideway can be compensated with the resolution of 2.7nm, 1/100 contollable range, and the frequency bandwidth of 5.5 Hz. From these results, it is confirmed that the ACC is very effective to improve the motion accuracy of high or ultra precision hydrostatic guideways.

• 한국전자파학회논문지
• /
• 제22권8호
• /
• pp.784-789
• /
• 2011

본 논문에서는 UHF RFID 리더에서의 오토트랜스포머를 이용한 가변 송신 누설 신호 제거기를 제안하였다. 제안된 송신 누설 신호 제거기는 오토트랜스포머와 디지털 가변 캐패시터, 가변 저항, 보상 증폭기로 구성되었으며, 0.13 ${\mu}m$ 1-폴리 6-메탈 RF CMOS 공정을 사용하여 설계되었다. 시뮬레이션 결과, 제안된 구조는 송신단에서 수신단으로 신호가 전송될 때 55 dB 이상의 송신 누설 신호 제거도를 보이며, 2.5 dB의 수신 삽입 손실을 갖는다. 송신 누설 신호 제거 회로는 825 MHz에서 985 MHz까지 디지털 주파수 조정이 가능하며, CMOS 공정으로 집적될 수 있다.

• 한국음향학회지
• /
• 제20권6호
• /
• pp.82-86
• /
• 2001

본 논문에서는 평행한 이중 선 배열을 위한 합성 기법을 제안하고자 한다. 일반적으로 천해에서 사용되는 단일 배열은 신호의 이득을 높이고 각 분해능을 높이기 위해서 긴 어퍼쳐 길이를 요구하고 있다. 그러나 원거리로부터 발생한 극 저주파 신호는 수신단에서 어레이를 기준으로 좌, 우 모호성을 드러낸다. 이러한 문제점을 해결하기 위해 평행한 이중 선 배열을 이용하면서 합성 기법을 적용하였다. 어레이 합성 기법은 연속적인 시간에서 얻어진 각각의 데이터들을 빔 영역에서 코히어런트한 합성을 거쳐 공간 영역에서 가상의 어레이로 확장하였다. 제안된 방법은 인접한 다중 음원 환경에서의 각도 오차를 줄이고 어레이 합성 횟수에 따라 향상된 분해능성능을 나타내었다. 시뮬레이션 결과 어레이 합성 기법을 적용하기 전과 5회의 합성을 수행했을 경우, 평균 부엽 레벨은 약 7dB가 향상되었다.

• 한국소음진동공학회논문집
• /
• 제17권9호
• /
• pp.819-825
• /
• 2007

Vibration characteristics of an duel-cooling cylindrical fuel rod, which was proposed as a candidate design of fuel's cross section for the ultra-high burnup nuclear fuel, according to the cross-sectional dimensions and the number of supports or the span length were analytically studied. Finite element(FE) modeling for the annular cross sectional fuel was based on the methodology, that have been proven by the test verification, for the conventional PWR nuclear fuel rod. A commercial FEA code, ABAQUS, was used for the FE modeling and analysis. A planar beam element (B21) that uses a linear interpolation was used for the fuel rod and a linear spring element for the spring and dimple of the SG. Natural frequencies and mode shape were calculated according to the preliminary design candidates for the fuel's cross sectional dimension and the number of span. From the analysis results, the design scheme of the annular fuel compatible to the present PWR nuclear reactor core was discussed in terms of the number of supports and fuel's cross section.

• 열처리공학회지
• /
• 제14권5호
• /
• pp.292-296
• /
• 2001

In this work, an ultra-high vacuum activated reactive evaporation equipment was built. With reaction of Al and oxygen plasma, $Al_2O_3$ was deposited on the surface of etched Al foil. The chamber was evacuated down to $2{\times}10^{-7}$ torr initially. The Ar and $O_2$ gas introduced into the chamber to maintain $5{\times}10^{-5}$ torr during deposition. Ar gas prevents recombining of the ionized oxygen. Evaporation was maintained by electron beam evaporator continuously. Heating filament and electrode were used in order to generate plasma. The substrate bias of -300V was introduced to accelerate deposition of evaporated Al atoms. The composition and morphology of deposited $Al_2O_3$ films were analyzed by x-ray photoelectron spectroscopy(XPS) and atomic force microscopy (AFM), respectively. The Al oxide was formed on the surface of etched Al foil. According to AFM results, the surface morphology of $Al_2O_3$ film indicates uniform feature. Dielectric characteristic was measured as a function of frequency. Measured withstanding voltage and capacitance were 52V and $24{\mu}F/cm^2$, respectively. The obtained $Al_2O_3$ film shows clean condition without contaminants, which could be adapted to capacitor production.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 추계학술대회 논문집 Vol.15
• /
• pp.228-231
• /
• 2002

In this paper, we estimated the insulation properties of cross-linked polyethylene (XLPE) for ultra-high voltage cable. we have studied the dielectric characteristics of XLPE due to frequency and temperature variation. The dielectric characteristics were measured in the temperature range from $25[^{\circ}C]$ to $120[{^{\circ}C]}$. Also we measured in the voltage range of 1[V] to 20[V] according to the step voltage application method. From FT-IR spectrum as an analysis of physical properties, a strong absorption in wavenumbers 700 to $730[cm^{-1}]$, $1456[cm^{-1}]$ and 2700 to $3000[cm^{-1}]$ observed by the methyl groups$(CH_{2})$. From the analysis of DSC, the crystalline melting points of the specimen observed in the temperature $60[^{\circ}C]$ and $106.58[^{\circ}C]$.

• IEIE Transactions on Smart Processing and Computing
• /
• 제4권2호
• /
• pp.71-77
• /
• 2015

Upcoming ground-breaking applications for always-on tiny interconnected devices steadily demand two-fold features of processor cores: aggressively low power consumption and enhanced performance. We propose implementation of a novel superscalar low-power processor core with a low supply voltage. The core implements intra-core low-power microarchitecture with minimal performance degradation in instruction fetch, branch prediction, scheduling, and execution units. The inter-core lockstep not only detects malfunctions during low-voltage operation but also carries out software-based recovery. The chip incorporates a pair of cores, high-speed memory, and peripheral interfaces to be implemented with a 65nm node. The processor core consumes only 24mW at 350MHz and 0.68V, resulting in power efficiency of $80{\mu}W/MHz$. The operating frequency of the core reaches 850MHz at 1.2V.

• 한국군사과학기술학회지
• /
• 제14권3호
• /
• pp.509-516
• /
• 2011

In this paper, a ground penetrating radar(GPR) system is implemented for landmine detection. The performance of the GPR system is associated with the characteristics of local soil and buried target. The choice of the center frequency and the bandwidth of the GPR system are the key factors in the GPR system design. To detect a small and shallow target, the higher frequencies are needed for high depth resolution. We have been designed, fabricated and tested a new impulse generator using step recovery diodes. The measured impulse response has an amplitude of 6.2V and a pulse width of 250ps. The implemented GPR system has been tested real environmental conditions and has proved its ability to detect a small buried target.

• 전기학회논문지
• /
• 제57권12호
• /
• pp.2147-2152
• /
• 2008

This paper proposes an algorithm to estimate the circulating currents in the transformers in parallel in an ultra high voltage system. For the Y-Y-${\Delta}$ transformers operated in parallel, there exist two kinds of the circulating currents i.e. one is between the tanks and the other between the banks of the delta side. As the former is 90 deg out of phase of the load current, it is estimated by decomposing the line current into the component 90 deg out of phase of the load current in the frequency domain. The latter is estimated in the time domain from applying the Kirchhoff's voltage law on the delta winding which gives a first-order differential equation in terms of the delta winding currents. To estimate the circulating currents between the tanks, the performance of the proposed algorithm is investigated when the impedances of the two transformer tanks are different or the taps of the on-load tap changer of the transformers are mismatched temporarily. To estimate the circulating currents between the banks, the performance of the proposed algorithm is also examined under magnetic inrush and over-excitation. Test results indicate that the algorithm can estimate the two kinds of the circulating currents successfully.

• 한국통신학회논문지
• /
• 제27권1A호
• /
• pp.1-12
• /
• 2002

초광대역 통신은 전 주파수 대역에 걸쳐 스펙트럼이 마치 기저 대역 잡음과 유사한 형태로 존재하여 타 통신시스템에 간섭을 주지 않고 고속의 통신이 가능하며, 반송파를 사용하지 않기 때문에 송${\cdot}$수신기의 소비 전력과 그 구조를 간략화 시킬 수 있다. 본 논문에서는 평균값이 0이고 대칭성을 갖는 레일리 모노펄스 Antipodal 방식을 처음으로 적용하여 초광대역 신호를 구성하고 시간 도약 부호를 적용하여 다중접속 시스템을 제안하였다. AWGA에서 레일리 모노펄스에 대한 오류확률, 다중접속시 사용자의 수, 전송속도에 대해 수치해석을 통해 시스템의 성능을 비교, 분석하였다. 그 결과 제안한 Antipodal 방식은 기존의 펄스 위치 변조 방식보다 오류확률, 사용자의 수 및 전송속도 면에서도 유리함을 보였다.