• Journal of Advanced Marine Engineering and Technology
• /
• 제24권6호
• /
• pp.24-33
• /
• 2000

This paper investigates the relationship between J-integral and crack tip opening displacement, ${\delta}_t$ using Gordens results of numerical analysis. Estimation were carried out for several strength levels such as ultimate, flow, yield, ultimate-flow, flow-yield stress to determine the influence of strain hardening and the ratio of crack length to width on the $J-{\delta}_t$ relationship. It was found that for SE(B) specimens, the $J-{\delta}_t$ relationship can be applied to relate J to ${\delta}_t$ as follows $J=m_j{\times}{\sigma}_i{\times}{\delta}_t$ where $m_j=1.27773+0.8307({\alpha}/W)$, ${\sigma}_i:{\sigma}_U$, ${\sigma}_{U-F}={\frac{1}{2}} ({\sigma}_U+{\sigma}_F$), ${\sigma}_F$, ${\sigma}_F}$ $Y=({\sigma}_F+{\sigma}_Y)$, ${\sigma}_Y$

• Structural Engineering and Mechanics
• /
• 제41권4호
• /
• pp.495-508
• /
• 2012

The strength theory of concrete is significant to structure design and nonlinear finite element analysis of concrete structures because concrete utilized in engineering is usually subject to the action of multi-axial stress. Experimental results have revealed that lightweight aggregate (LWA) concrete exhibits plastic flow plateau under high compressive stress and most of the lightweight aggregates are crushed at this stage. For the purpose of safety, therefore, in the practical application the strength of LWA concrete at the plastic flow plateau stage should be regarded as the ultimate strength under multi-axial compressive stress state. With consideration of the strength criterion, the ultimate strength surface of LWA concrete under multi-axial stress intersects with the hydrostatic stress axis at two different points, which is completely different from that of the normal weight concrete as that the ultimate strength surface is open-ended. As a result, the strength criteria aimed at normal weight concrete do not fit LWA concrete. In the present paper, a multi-axial strength criterion for LWA concrete is proposed based on the Unified Twin-Shear Strength (UTSS) theory developed by Prof Yu (Yu et al. 1992), which takes into account the above strength characteristics of LWA under high compressive stress level. In this strength criterion model, the tensile and compressive meridians as well as the ultimate strength envelopes in deviatoric plane under different hydrostatic stress are established just in terms of a few characteristic stress states, i.e., the uniaxial tensile strength $f_t$, the uniaxial compressive strength $f_c$, and the equibiaxial compressive $f_{bc}$. The developed model was confirmed to agree well with experimental data under different stress ratios of LWA concrete.

• Journal of Advanced Marine Engineering and Technology
• /
• 제26권1호
• /
• pp.59-67
• /
• 2002

The comparison of $J_{Rice}$-resistance considering a few strength ratio in Rice J-integral formula and $J_{\delta}$-resistance curves converted from experimental CTOD using appropriate strength chosen according to strain hardening level, n=10.6 (A533B steel) and n=8.1 (BS4360 steel) is carried out. The optimal dimensionless strength ratio like the factor of revision, (see full text)reflecting strain hardening level in Rice\`s experimental formula is found out and the reliability of appropriate reference strength chosen according to strain hardening level in different materials is investigated through doing that CTOD is transformed from $J_{\delta}$-integral using relationship between J-integral and CTOD. The results are as follows; 1) The optimal factor of revision is when m equals to 3 in (see full text) for Rice's and the above optimal factor of revision multiplies by coefficient, η in Rice's experimental formula instead of n=2, 2) and the pertinent reference strength for high strain hardening material like BS4360 steel is ultimate strength, $\sigma_{u}$ and for material like A533B steel is ultimate-flow strength, $\sigma_{u-f}$. The incompatible of the behavior of both experimental J-resistance curves using Rice's formula and CTOD-resistance curves for A533B and BS4360 steel by Gordon, et al., could be corrected using the optimal factor of revision in Rice\`s and the pertinent reference strength in J=$m_{j}$${\times}$$\sigma_{i}$${\times}$CTOD.

• 한국해양공학회지
• /
• 제10권4호
• /
• pp.28-37
• /
• 1996

A finite element analysis code considering elasto-plastic large deformation is developed to predict the ultimate strength of circular cylinders subject to external pressure loading by introducing a new type of axisymmetric shell element which can take into account the plasticity effect due to the circumferential bending while drastically saving the computing efforts compared with the tree dimensional finite element analysis. It is observed that analsis results of present approach show good agreement with the test results of previous works. Parametric study gives the effects of initial imperfections on ultimate strength ahd this information is recommended to be used to modify the actual test data to the ones which can be used more reasonably in making empirical design formulas.

• 한국건설순환자원학회논문집
• /
• 제7권2호
• /
• pp.145-150
• /
• 2019

본 논문에서는 비틀림을 받는 RC 부재의 콘크리트 기여 강도를 포함하고 전단흐름두께를 합리적으로 고려한 비틀림 강도 추정식을 제안하였다. 본 논문에서 제안한 극한비틀림 강도 추정식을 검증하기 위하여, 현행 콘크리트 구조기준(KCI 2017, ACI 318-14)에서 규정한 공칭비틀림강도와 Rahal의 비틀림강도 추정식, 본 논문에서 제시한 새로운 비틀림강도 추정식에 의한 이론값을 참고 문헌에서 발췌한 104개의 보에 대한 극한비틀림강도 측정값과 각각 비교 검토하였다. 그 결과 콘크리트 기여강도를 반영한 Rahal의 비틀림강도 추정식과 본 논문에서 제안한 비틀림강도 추정식에 의한 극한비틀림강도가 현행 설계기준이 규정한 공칭비틀림강도보다 실험값에 더 가깝게 나타났다.

• 대한기계학회논문집
• /
• 제17권7호
• /
• pp.1772-1782
• /
• 1993

The characteristics of metal matrix composite under dynamic tension at high strain rates up to the order of $10^3/sec$ is studied by using newly developed apparatus. The composite material processed in this research is aluminum-alumina metal matrix composites, arid fabricated by compocasting with the fiber volume fraction from 5 to 20%. The whisker and matrix material used in this paper were ${\delta}-Al_2O_3$ and Al-6061, respectively. The mechanical tests performed in this research are low and high strain rate tensile test. At low strain-rate tensile test, the modulus of elasticity and the ultimate tensile strength of the composites were improved about 77 pct. and 55 pct., respectively comparing with the unreinforced materials. At strain-rate from $10^{-3}\;to\;10^3/s$, the effect of strain-rate on the modulus, ultimate strength, flow stress is determined. Also the effect of strain rate on the modulus, ultimate tensile strength, flow stress and elongation to failures were investigated.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2003년도 봄 학술발표회 논문집
• /
• pp.45-52
• /
• 2003

A finite element procedure to estimate ultimate strength of space frames considering spread of plasticity is presented. The improved displacement field is introduced based on inclusion of second order terms of finite rotations. All the nonlinear terms due to bending and torsional moment as well as axial force are precisely considered. The concept of plastic hinge is introduced and the incremental load/displacement method is applied for the elasto-plastic analysis. The initial yield surface is defined based on the residual stress and the full plastification surface is considered under the combined action of axial force, bending and torsional moments. The elasto-plastic stiffness matrices are derived using the flow rule and the normality condition of the limit function. Finite element solutions for ultimate strength of space frames are compared with available solutions and experimental results.

• Structural Engineering and Mechanics
• /
• 제15권2호
• /
• pp.225-238
• /
• 2003

In the present study, the finite strip analysis of a box girder to simulate a ship's hull model is carried out to investigate its inelastic post-buckling behavior and to predict its ultimate flexural strength. Residual stresses and initial geometrical imperfections are both considered in the combined material and geometrical nonlinear analysis. The von-Mises yield criterion and the Prandtl-Reuss flow theory of plasticity are applied in modeling the elasto-plastic behavior of material. The Newton-Raphson iterative process is also employed in the analysis to achieve convergence. The numerical results agree well with the experimental data. The effects of some material and geometrical parameters on the ultimate strength of the structure are also investigated.

• 한국강구조학회 논문집
• /
• 제15권3호
• /
• pp.299-311
• /
• 2003

점진적 소성화를 고려한 공간뼈대구조의 극한강도를 평가하기 위한 비선형 유한요소 해석법을 제시한다. 유한한 회전각의 2차항 까지 고려된 개선된 변위장을 도입하여 결과적으로 축력뿐만 아니라 휨모멘트 그리고 비틂모멘트에 의한 비선형 효과를 모두 고려한다. 탄-소성 해석을 위하여 소성힌지 개념을 도입하고 비선형 해석방법으로 하중 및 변위증분법을 이용한다. 잔류응력 분포에 의거한 초기항복함수를 정의하고 축력뿐만 아니라 모멘트의 함수로 표현되는 소성영역함수를 사용하여 flow rule과 normality condition을 적용하여 탄-소성 강도매트릭스를 도출한다. 계산시간이 빠른 기존의 소성힌지 해석기법을 사용하는 동시에 소성영역의 진전효과를 효율적으로 나타내었다. 요소의 소성화 진행정도를 나타내는 파라미터를 도입하고 여러 가지 강도감소모델을 사용하여 극한해석을 수행하여 그 결과를 소성영역해석, 쉘요소를 이용한 정밀해석 그리고 실험결과와 비교하였다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제17권6호
• /
• pp.31-39
• /
• 2013

고강도 콘크리트 보의 극한상태의 거동을 강도에 따라 연구하였다. 13개의 보를 해석하고 그 결과를 제시하였다. 변수는 콘크리트의 압축강도로 범위는 57~184 MPa이며, 횡방향 철근비로 범위는 0.35~1.49%이다. 실험에서 측정한 극한 비틀림 강도를 본 논문에서 제안한 값과 ACI 기준에 따른 값을 비교하였다. 그 결과 본 논문에서 제안한 이론에 의한 극한 비틀림 강도가 ACI 기준에 따른 값보다 더 좋은 결과를 보였다.