• 보존과학회지
• /
• 제35권1호
• /
• pp.19-31
• /
• 2019

To study the cleaning effects and post-treatment stability assessment of various methods of cleaning textiles with metal thread, six naturally-soiled historical textiles with metal thread were investigated at the Metropolitan Museum of Art, New York. Prior to the cleaning of fabricated gold, silver, and copper thread that had been glued onto a paper substrate, the artificial deterioration was carried out in a controlled environment with light(UV and daylight), and temperature and humidity factors which would weaken and damage the samples. A synthetic soil mixture was applied to the samples to imitate soil found on the historic and archaeological textiles with metal thread; the cleaning effect and post-treatment assessment were investigated by use of three textile cleaning methods: mechanical cleaning, wet cleaning, and solvent cleaning. While investigating the naturally-soiled textiles with metal thread, it was determined that the soil colors and sizes of contaminating particles of each textile were different due to the diversity of original environmental factors and conditions. After cleaning with kneaded rubber, Stoddard solvent, n-decane or n-hexane, a bright, clean effect was apparent. Kneaded rubber was successful in picking up both large and small particles, but its stickiness caused some of the metal leaf to peel off. Stoddard solvent produced a good cleaning effect, but after use of n-hexane and n-decane in the cleaning process, a white layer of residue remained on the textile's surface. Wet cleaning was not effective and the rapid humidity changes between wet and dry conditions caused the edges of the paper substrate to lose their original shape.

• 한국분말재료학회지
• /
• 제26권1호
• /
• pp.34-39
• /
• 2019

Current synthesis processes for titanium dioxide ($TiO_2$) nanoparticles require expensive precursors or templates as well as complex steps and long reaction times. In addition, these processes produce highly agglomerated nanoparticles. In this study, we demonstrate a simple and continuous approach to synthesize $TiO_2$ nanoparticles by a salt-assisted ultrasonic spray pyrolysis method. We also investigate the effect of salt content in a precursor solution on the morphology and size of synthesized products. The synthesized $TiO_2$ nanoparticles are systematically characterized by X-ray diffraction, transmission electron micrograph, and UV-Vis spectroscopy. These nanoparticles appear to have a single anatase phase and a uniform particle-size distribution with an average particle size of approximately 10 nm. By extrapolating the plots of the transformed Kubelka-Munk function versus the absorbed light energy, we determine that the energy band gap of the synthesized $TiO_2$ nanoparticles is 3.25 eV.

• 한국수산과학회지
• /
• 제53권6호
• /
• pp.842-850
• /
• 2020

The objective of this study was to evaluate the effect of the depuration process (artificial seawater sterilization using UV light) for extending the shelf life of raw oyster Crassostrea gigas and maintaining food quality. To confirm the effects of depuration, microbiological (viable cell count) and several physiochemical analyses (pH and glycogen levels in shucked oyster and pH, soluble protein, and turbidity in filling water) were carried out during the storage of raw oysters. The results showed that depuration could effectively extend the shelf life (2-3 days) of raw oysters with minimal change in food quality, including pH and glycogen content. Thus, the depuration process proposed in this study could successfully be applied to processing practices for other shellfish to extend their shelf life and contribute to the management of seafood safety issues.

• 한국물환경학회지
• /
• 제27권1호
• /
• pp.98-103
• /
• 2011

Photocatalysis using UV light and catalysts is an attractive low temperature and non-energy- intensive method for remediation of a wide range of chemical contaminants like chloroform (CF). Recently development of environmental friendly and sustainable catalytic systems is needed before such catalysts can be routinely applied to large-scale remediation or drinking water treatment. Titanium dioxide is a candidate material, since it is stable, highly reactive, and inexpensive. Diatoms are photosynthetic, single-celled algae that make a microscale silica shell with nano scale features. These diatoms have an ability to biologically fabricate $TiO_2$ nanoparticles into this shell in a process that parallels nanoscale silica mineralization. We cultivated diatoms, metabolically deposited titanium into the shell by using a two-stage photobioreactor and used this biogenic $TiO_2$ to this study. In this study we evaluated how effectively biogenic $TiO_2$ nanoparticles transform CF compared with chemically-synthesized $TiO_2$ nanoparticlesthe and effect of pretreatment of diatom-produced $TiO_2$ nanoparticles on photocatalytic transformation of CF. The rate of CF transformation by diatom-$TiO_2$ particles is a factor of 3 slower than chemically-synthesized one and chloride ion production was also co-related with CF transformation, and 79~91% of CF mineralization was observed in two $TiO_2$ particles. And the period of sonication and mass transfer due to particle size, evaluated by difference of oxygen tention does not affect on the CF transformation. Based on the XRD analysis we conclude that slower CF transformation by diatom-$TiO_2$ might be due to incomplete annealing to the anatase form.

• Current Applied Physics
• /
• 제18권11호
• /
• pp.1422-1425
• /
• 2018

$NaTa_{1-x}Fe_xO_3$ ($0{\leq}x{\leq}0.40$) nanocubes were synthesized by a relatively low temperature hydrothermal method, using $Ta_2O_5$, $FeCl_3$ and NaOH as the precursors. The UV-vis diffuse reflectance spectra showed that $NaTa_{1-x}Fe_xO_3$ had significant visible-light-absorbing capability, and the absorption edge of $NaTaO_3$ shifted to longer wavelength with the increase of Fe dopants. Moreover, $NaTa_{1-x}Fe_xO_3$ exhibited room-temperature ferromagnetism when $Fe^{3+}$ occupied $Ta^{5+}$ sites in $NaTaO_3$ crystal lattice. The ferromagnetism is mainly attributed to the superexchange interactions between doped $Fe^{3+}$, rather than the contribution of oxygen vacancies caused by Fe doping. Therefore, Fe doping can simultaneously regulate the optical and magnetic properties of $NaTaO_3$ semiconductor, which will enable its potential applications in multifunctional optical-electronics and opticalspintronics devices.

• 대한금속재료학회지
• /
• 제49권10호
• /
• pp.811-817
• /
• 2011

In this study, we have investigated the role of a metal oxide hole injection layer (HIL) between an Indium Tin Oxide (ITO) electrode and an organic hole transporting layer (HTL) in organic light emitting diodes (OLEDs). Nickel Oxide films were deposited at different deposition times of 0 to 60 seconds, thus leading to a thickness from 0 to 15 nm on ITO/glass substrates. To study the influence of NiO film thickness on the properties of OLEDs, the relationships between NiO/ITO morphology and surface properties have been studied by UV-visible spectroscopy measurements and AFM microscopy. The dependences of the I-V-L properties on the thickness of the NiO layers were examined. Comparing these with devices without an NiO buffer layer, turn-on voltage and luminance have been obviously improved by using the NiO buffer layer with a thickness smaller than 10 nm in OLEDs. Moreover, the efficiency of the device ITO/NiO (< 5 nm)/NPB/$Alq_3$/ LiF/Al has increased two times at the same operation voltage (8V). Insertion of a thin NiO layer between the ITO and HTL enhances the hole injection, which can increase the device efficiency and decrease the turn-on voltage, while also decreasing the interface roughness.

• Advances in environmental research
• /
• 제9권4호
• /
• pp.275-284
• /
• 2020

We provide the first study on the occurrence of microplastics in Dal lake, Kashmir, India. Microplastics act as catastrophe that trigger many environmental problems. The key origins of microplastics are larger plastics, which split into smaller plastics after UV light disintegration. There is relatively little work carried out on the existence of microplastics. The present work has been undertaken on the occurrence of microplastics at four pre-selected sites (surface water) in Dal lake, Kashmir. The samples were taken to the laboratory to dissolve organic matter by using H2O2 (6%). To speed up the organic digestion; the treated mixture was heated on a hot plate at 70℃. The mixture was then subjected to density separation. The supernatant obtained was observed under the microscope (10X) and measurements were taken. At site-I, the microplastics ranged from 2-3 mm, site-II 5-6 mm, site-III 3-4 mm, site-IV 4-5 mm in thickness, indicating the presence of microplastics in the lake. The presence of microplastics indicated that the lake has undergone an anthropogenic change over a period of time. Our research highlights the value of enhancing the quality of the drainage system and sewage disposal. This work can be helpful to recognize successful microplastic control management techniques and possible threats associated with the Dal lake. So far, no such data on the presence of microplastics in Kashmir lakes is available.

• Current Photovoltaic Research
• /
• 제8권4호
• /
• pp.129-133
• /
• 2020

It is very important to optimize the reflectance of incident light in solar modules for improving output power and reducing loss of cell-to-module (CTM). It is assumed that a higher reflectance backsheet may improve optical efficiency. However how much output power is related to optical properties by reflectance property of backsheets have not been revealed clearly yet. A total of 3 types of industrial backsheets with 3 type of industrial encapsulants (EVA or POE) were analyzed as fabricated mini modules used shingled cells. According to the type of backsheets, the difference between the highest and lowest average reflectance in the range of 400 nm to 1200 nm was found to be 13.08% by UV-visible spectroscopy. Also, when using the same encapsulant, the maximum gap value of the output power increase was measured by about 3.755 mW% (166.02 mW). The correlation between reflectance and output power was experimentally found by measuring the output property of the fabricated shingled mini modules.

• Journal of Korean Dental Science
• /
• 제15권1호
• /
• pp.9-18
• /
• 2022

Purpose: The purpose of this study was to evaluate whether three-dimensional (3D)-printed flexible denture resin has suitable mechanical properties for use as a thermoplastic denture base resin material. Materials and Methods: A total of 96 specimens were prepared using the 3D printed flexible denture resin (Flexible Denture). Specimens were designed in CAD software (Tinkercad) and printed through a digital light-processing 3D printer (Asiga MAX UV). Post-polymerization process was conducted according to air exposure or glycerin immersion at 35℃ or 60℃ and for 30 or 60 minutes. The maximum flexural strength, elastic modulus, 0.2% offset yield strength, and Vickers hardness of 3D-printed flexible denture resin were assessed. Result: The maximum flexural strength ranged from 64.46±2.03 to 84.25±4.32 MPa, the 0.2% offset yield strength ranged from 35.28±1.05 to 46.13±2.33 MPa, the elastic modulus ranged from 1,764.70±64.66 to 2,179.16±140.01 MPa, and the Vickers hardness ranged from 7.01±0.40 to 11.45±0.69 kg/mm². Conclusion: Within the limits of the present study, the maximum flexural strength, 0.2% offset yield strength, elastic modulus, and Vickers hardness are sufficient for clinical use under the post-polymerization conditions of 60℃ at 60 minutes with or without glycerin precipitation.

• Journal of Veterinary Science
• /
• 제23권4호
• /
• pp.62.1-62.10
• /
• 2022

Background: The corneal and limbal morphology relevant to corneal epithelial maintenance in ten different species was examined using histological methods. Objectives: The presence of a Bowman's layer, limbal epithelial cell, and superficial stromal morphology was examined in the following species to evaluate the differences in corneal thickness and epithelium: Java sparrows, frogs, macaws, spoonbills, red pandas, penguins, horses, Dobermans, orangutans, and humans. Methods: Corneal sections (4 ㎛) were obtained from ten ocular globes from three different animal classes: Aves, Amphibia, and Mammalia. All sections were stained with hematoxylin and eosin and periodic acid-Schiff reaction. After microscopy, all stained slides were photographed and analyzed. Results: Significant morphological differences in the corneal and limbal epithelia and their underlying stroma between species were observed. The number of corneal epithelial cell layers and the overall corneal epithelial thickness varied significantly among the species. The presence of a Bowman's layer was only observed in primates (orangutans and humans). Presumed supranuclear melanin caps were noted in four species (orangutans, macaws, red pandas, and horses) in the limbal basal epithelial layer (putative site of corneal epithelial stem cells). The melanin granules covered the apex of the cell nucleus. Conclusions: Supranuclear melanin capping has been described as a process within the epidermis to reduce the concentration of ultraviolet-induced DNA photoproducts. Similarly, there may be a relationship between limbal stem cell melanin capping as a protective mechanism against ultra-violet radiation.