• Food Science and Industry
• /
• v.53 no.4
• /
• pp.382-389
• /
• 2020

"Eating cosmetic" market comes to prominence worldwide. Inner Beauty has established itself as the top trend nowadays and is leading the health functional food market. Another noticeable trend other than beauty-from-within is that products using "plant-based" natural botanical raw material are increasing. Based on these trends above, we have developed a plant extract named Agatri® for skin health using Agastache rugosa. By ingesting Agatri®, it is expected that the formation of skin wrinkles is suppressed, and skin elasticity is increased by suppressing the decrease in collagen content caused by ultraviolet rays. At the same time, it is possible to prevent skin aging by improving skin hydration and trans-epidermal water loss (TEWL). The studies show that it significantly increased production of hyaluronic acid and collagen, and decreased production of matrix metalloproteinases (MMPs). And Agatri® has been approved as an "Individually recognized functional ingredient for skin health by the Ministry of Food and Drug Safety, Korea in 2020. As a result, Agatri® is a good solution for those who are in need of skin protection from exposure to UV and aging.

• Membrane Journal
• /
• v.18 no.1
• /
• pp.65-74
• /
• 2008

NOM and fine particles are the main target materials in water treatment using membranes. Particularly, humic substances extracted from soils are frequently used in many fundamental studies representing natural organic matter in raw water for drinking water treatment. In this study, ultrafiltration (UF) of artificial humic water and natural river water was conducted and the characteristics of removal efficiency and permeability were compared. In the UF of river water, the transmembrane pressure increased in the same pattern with that of 5 mg/L humic water. For the removal of organic matter and fine particles, however, two types of feed water had shown different trends. Kaolin particles and humic acids added to artificial water were better removed, while colloids and organics in natural water were relatively poorly removed. From the $UV_{254}$ and GPC analyses, it seemed that the hydrophobicity and size of humic substances contributed to the greater removal of organic matter. The UF membrane applied for humic water also showed a higher flux recovery by caustic chemical cleaning than that for river water.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.4
• /
• pp.503-509
• /
• 2019

The demand for smaller, faster, and multi-functional mobile devices in increasing at a rapidly increasing rate. In response to these trends, Stacked Chip Scale Package (SCSP) is used widely in the assembly industry. A film type adhesive called die attach film (DAF) is used widely for bonding chips in SCSP. The DAF requires high flowability at high die attachment temperatures for bonding chips on organic substrates, where the DAF needs to feel the gap depth, or for bonding the same sized dies, where the DAF needs to penetrate bonding wires. In this study, the mixture design of experiment (DOE) was performed for three raw materials to obtain the optimized DAF recipe for low elastic modulus at high temperature. Three components are acrylic polymer (SG-P3) and two solid epoxy resins (YD011 and YDCN500-1P) with different softening points. According to the DOE results, the elastic modulus at high temperature was influenced greatly by SG-P3. The elastic modulus at $100^{\circ}C$ decreased from 1.0 MPa to 0.2 MPa as the amount of SG-P3 was decreased by 20%. In contrast, the elastic modulus at room temperature was dominated by YD011, an epoxy with a higher softening point. The optimized DAF recipe showed approximately 98.4% pickup performance when a UV dicing tape was used. A DAF crack that occurred in curing was effectively suppressed through optimization of the cure accelerator amount and two-step cure schedule. The imizadole type accelerator showed better performance than the amine type accelerator.

• Korean Chemical Engineering Research
• /
• v.59 no.4
• /
• pp.514-520
• /
• 2021

A drug delivery system (DDS) based on nanoparticles has been used as a mediator to improve the efficacy of a drug by controlling the amount of drug released and delivering it to a target place. Chitosan, which is non-toxic and biodegradable, has good biocompatibility and excellent adsorption, so it can be used as a drug delivery vehicle. Valine, the essential amino acids, helps muscle growth and tissue recovery, and along with other amino acids. It lowers blood sugar levels and increases growth hormone production. In this study, Valine was adsorbed on magnetic chitosan which is capable of drug absorption, and Fe₃O₄-Valine CNPs was prepared through cross-linking with TPP (Tripolyphosphate). And then absorption and release trends of valine were investigated with the Fe₃O₄-Valine CNPs. Fe₃O₄, which has relatively high stability, is used to make the drug carrier magnetic so that the drug can be delivered to a target place. At optimal conditions, the absorption and release tendency of Fe₃O₄-Valine CNP was confirmed by analyzing by UV-Vis through the Ninhydrin test which is the color reaction of amino acids and by measuring the size of the particles, it was confirmed that it is suitable as a drug carrier.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.37 no.1
• /
• pp.36-42
• /
• 2024

Roll-to-roll processing holds an integral position within the manufacturing landscape, and its significance reverberates across numerous industries. This versatile technology platform encompasses a diverse array of process methods and accommodates a wide spectrum of material categories, making it a cornerstone of modern production. Within this expansive domain, two commonly employed coating techniques, namely the slot die and gravure coating methods, have earned their prominence for their precision and efficiency in delivering flawless coatings. Additionally, the realm of drying processes relies heavily on thermal drying, infrared (IR) drying, and ultraviolet (UV) drying methods to expedite the transformation of materials from their liquid or semi-liquid states to solid, ready-to-use products. The undeniable importance of roll-to-roll processing lies in its ability to streamline manufacturing processes, reduce costs, and enhance product quality. This article embarks on a comprehensive journey to fathom the depth of this importance by delving into the intricacies of these common roll-to-roll process methods. Through rigorous research and meticulous data collection, we aim to shed light on the pivotal role these techniques play in shaping various industries and advancing the world of manufacturing. By understanding their significance, we can harness the full potential of roll-to-roll processing and pave the way for innovation and excellence in production.

• Journal of Life Science
• /
• v.33 no.5
• /
• pp.445-454
• /
• 2023

Hair graying is the result of a malfunction in the signaling pathways that control melanogenesis, and it is activated by UV light, melanocyte-stimulating hormone (MSH), stem cell factor (SCF), Wnt, and endothelin-1 (ET-1). To prevent hair graying, synthetic and natural compounds can be used to stimulate melanogenesis effectively under the control of tyrosinase, tyrosine hydroxylase, tyrosinase-related protein-1 (TRP-1), TRP-2, and microphthalmia-associated transcription factor (MITF). This article describes a crucial strategy to resolve the problem of hair graying, as well as recent advances in the signaling pathway related to melanogenesis and hair graying. In particular, the article reviews potentially effective therapeutic agents that promote melanogenesis, such as antioxidants that modulate catalase, methionine sulfoxide reductase, and sirtuin 1 (SIRT1) activators including resveratrol, fisetin, quercetin, and ginsenoside. It also discusses vitiligo inhibitors, such as corticosteroids, calcineurin inhibitors, and palmitic acid methyl ester, as well as activators of telomerase expression and activity, including estrogen, androgen, progesterone, and dihydrotestosterone. Furthermore, it explores compounds that can inhibit hair graying, such as latanoprost, erlotinib, imatinib, tamoxifen, and levodopa. In conclusion, this article focuses on recent research trends on compounds that promote melanin production related to hair graying.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.127-127
• /
• 2009

The most important part of the fabrication solar cells is the anti-reflection coating when excludes the kinds of silicon substrates (crystalline, polycrystalline, or amorphous), patterns and materials of electrodes. Anti-reflection coatings reduce the reflection of sunlight and at last increase the intensity of radiation to inside of solar cells. So, we can obtain increase of solar cell efficiency about 10% using anti-reflection coating. There are many kinds of anti-reflection film for solar cell, such as SiN, $SiO_2$, a-Si, and so on. And, they have two functions, anti-reflection and passivation. However such materials could not perfectly prevent reflection. So, in this work, we investigated the anti-reflection coating with the columnar structure ZnO thin film. We synthesized columnar structure ZnO film on glass substrates. The ZnO films were synthesized using a RF magnetron sputtering system with a pure (99.95%) ZnO target at room temperature. The anti-reflection coating layer was sputtered by argon and oxygen gases. The angle of target and substrate measures 0, 20, 40, 60 degrees, the working pressure 10 mtorr and the 250 W of RF power during 40 minutes. The confirm the growth mechanism of ZnO on columnar structure, the anti-reflection coating layer was observed by field emission scanning electron microscopy (FE-SEM). The optical trends were observed by UV-vis and Elleso meter.

• Journal of The Korean Astronomical Society
• /
• v.48 no.5
• /
• pp.299-311
• /
• 2015

We report first results from KVN and VERA Array (KaVA) VLBI observations obtained in the frame of our Plasma-physics of Active Galactic Nuclei (PAGaN) project. We observed eight selected AGN at 22 and 43 GHz in single polarization (LCP) between March 2014 and April 2015. Each source was observed for 6 to 8 hours per observing run to maximize the uv coverage. We obtained a total of 15 deep high-resolution images permitting the identification of individual circular Gaussian jet components and three spectral index maps of BL Lac, 3C 111 and 3C 345 from simultaneous dual-frequency observations. The spectral index maps show trends in agreement with general expectations – flat core and steep jets – while the actual value of the spectral index for jets shows indications for a dependence on AGN type. We analyzed the kinematics of jet components of BL Lac and 3C 111, detecting superluminal proper motions with maximum apparent speeds of about 5c. This constrains the lower limits of the intrinsic component velocities to ~ 0.98c and the upper limits of the angle between jet and line of sight to ~20°. In agreement with global jet expansion, jet components show systematically larger diameters d at larger core distances r, following the global relation d ≈ 0.2r, albeit within substantial scatter.

• Journal of Korean Society on Water Environment
• /
• v.37 no.6
• /
• pp.458-468
• /
• 2021

In this study, we investigated the variations of dissolved organic matter (DOM) in an agricultural reservoir during the monsoon period (June to October, 2020) with respect to the organic carbon concentration (DOC), molecular weight distribution, and optical properties. The monsoon period was divided into three phases - beginning storm (BS), during storm (DS), and after storm (AS). Our results showed significant differences in the concentrations and characteristics of DOM during the summer monsoon. The DOC concentrations were decreased after the monsoon, probably due to a dilution effect. In contrast, increasing trends were observed in the specific UV absorbance (SUVA), and relative abundances of humic-like fluorescence and larger-sized compounds. These observations implied that the large-sized and humic-like organic components with terrestrial origins strongly affected the reservoir DOM after the summer monsoon. Meanwhile, biopolymer size fraction, which is associated with algal activity, became more abundant after the monsoon. These results suggest that DOM with autochthonous sources became dominant as a result of the inflow of nutrients into the reservoir after the storm. Spatial changes in DOM within the reservoir were not pronounced as much as the temporal variations. All taken, it can be concluded that the summer monsoon simply led to the decrease of DOM concentrations while the sources and the quality of DOM underwent substantial changes, which may enrich refractory organic matter in the reservoir. This study reveals the importance of in-depth DOM quality monitoring before and after summer monsoon for effective water quality management in agricultural reservoirs.

• Journal of Radiation Industry
• /
• v.18 no.1
• /
• pp.53-61
• /
• 2024

This study explores the effects of X-ray irradiation for biological control and high-temperature degradation on dye stability in dyed textiles with Gardenia. To evaluate this study, optimal extraction solvents for these textiles were identified by comparing them with a crocin standard solution. Extraction using pyridine closely matched crocin. The study then assessed the stability of X-ray irradiation and high-temperature degradation on these textiles. Transparent yellow dyes were observed in all samples. Color differences were found to increase at higher irradiation doses and longer degradation periods. While UV spectroscopy spectra showed broadening and lowering trends with higher irradiation doses and longer degradation periods, suggesting a reduction in colorant transition, mass spectrometry revealed minimal chemical changes. In conclusion, both X-ray irradiation and high-temperature degradation induced spectral changes without complete dye decomposition. Major colorants were consistently detected.