• Applied Chemistry for Engineering
• /
• v.26 no.4
• /
• pp.400-405
• /
• 2015

Traditional anti-reflective (AR) coating films prepared using tetraethylorthosilicate (TEOS) as a precursor absorbs water easily in addition to having a weak abrasion resistance. To improve the transmittance, hydrophobicity and abrasion resistance of AR coating film, various AR coating films were prepared using methyltrimethoxysilane (MTMS) as a precursor in addition to introducing a fluoroalkylsilane, acid catalyst, base catalyst and acid-base two step catalyst. The prepared AR coating films were then characterized by UV-Vis spectroscopy, contact angle analyzer, atomic force microscope (AFM), pencil scratch hardness test and cross-cut test. As a result, the transmittance of bare glass was 90.5%, while that of AR coating glass increased to 94.8% at curing temperature of $300^{\circ}C$. When the fluoroalkylsilane was added, the water contact angle of AR coating film increased from $96.3^{\circ}$ to $108^{\circ}$, indicating that the hydrophobicity of the film was greatly improved. The abrasion resistance of AR coating film was also improved by the acid catalyst, whereas the transmittance increased by the base catalyst. In the case of AR coating film prepared using an acid-base two step catalyzed reaction, both the transmittance and abrasion resistance of the film was synergistically enhanced as compared with those of AR coating films prepared without introduction of a catalyst.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.30 no.4
• /
• pp.156-161
• /
• 2020

Recently, as there has been growing demand for aesthetic quality in structural materials, the development of excellent color cement concrete having good coloration properties has become a requirement. This study is designed to analyze the basic physical properties of mortar and the properties of keeping the coloration under an ultraviolet ray accelerated weathering test environment according to changes in the mixing ratio between carbon black and iron oxide used as colorants. The test results show that the use of carbon black and iron oxide reduces the initial flow by 6.3~17.2 % and the air content by 3.5~31.5 % but increases the unit volume weight by 3.4~5.5 %, compared to ordinary Portland cement (OPC). In addition, the study shows that the addition of iron oxide increases the self drying shrinkage. So, caution needs to be taken on the workability of the concrete. The brightness value L^⁎ represented by black showed the most excellent black colour when carbon black 3 % and iron oxide 5 % are added. According to UV accelerated weatherproof test, the brightness value L^⁎ was found to increase in all experiment specimens by 4.28~11.97 %, and the color change by UV was found to be higher for the case where carbon black colorant was not used. Therefore, in terms of color revelation characteristics, the case using carbon black 3 % and iron oxide 5 % was found to show the best black color.

• Development and Reproduction
• /
• v.4 no.1
• /
• pp.79-85
• /
• 2000

This study was made to optimize the conditions needed to produce two types of gynogenetic diploids in the sweet fish, Plecoglossus altivelis. Firstly, ultraviolet (UV) ray doses between 3,000 erg to 14,000 erg/$\textrm{mm}^2$ were tested to inactivate sperm genetically. Based on the appearance of the haploid syndromes in the embryo, a dose of UV ray 6000~7000 erg was required to inactivate sperm genetically. Then, cold shock treatment at 1~2$^{\circ}C$ for 15~30 min were conducted to retain the 2nd polar body in inseminated egg. The best elapsed time before the start of the cold shock was examined between 5~8 min. The experiments in which began 5 min after insemination at 1~2$^{\circ}C$ during 17.5 min gave 21.2％ survival rate and 89.7% normal eyed embryo rate. The gynogenetic diploid produced by suppression of the first cleavage, a considerably high number of heteroploids appeared and high mortality was observed at the metamorphosis stage, so further investigation is needed. The production of gynogenetic diploids were confirmed by GPI isozyme marker. The heterozygous type in Gpi-1 locus was observed in the meiotic-G2N as a result of gene-centromere recombination during meiosis. The heterozygous type was never observed in mitotic-G2N and showed segregation into two homozygous types at Gpi-1 locus.

• Journal of fish pathology
• /
• v.14 no.1
• /
• pp.11-15
• /
• 2001

For the production of healthy shrimp(Penaeus chinensis, Penaeus japonicus) seedlings free from the white spot baculovirus(WSBV), we tried to disinfect shrimp eggs with iodine. A relative hatching rate of over 50% has resulted from the treatments of fertilized eggs of fresh shrimps(P. chinensis) with an effective povidon-iodine concentration of 20-200 ppm for 30 seconds and 60 seconds, respectively. The 60 sec treatment group with a 20 ppm effective povidon-iodine concentration showed nearly a 50% relative hatching rate. The over 50 ppm treatment group, however, did not result in hatching show a relative hatching rate. These hatching rates were similar to those in the fertilized eggs of kuruma prawns treated with povidon-iodine solutions. In case of washing fertilized eggs with UV-irradiated seawater 33.3% relative hatching rate in fresh shrimps was much lower than 55.2% in kuruma shrimps. Treatment fertilized eggs of 2 species of shrimp with 200 ppm iodine for 30 sec did not affect the survival rate of the larvae until the early stage of the post larvae even though the hatching rates were low. In order to produce healthy shrimp seedlings non-infected by WSBV, the shrimp eggs should be washed with UV-irradated seawater and sterilized with a low povidon-iodine concentration for a short time.

• Journal of Korean Ophthalmic Optics Society
• /
• v.9 no.2
• /
• pp.381-389
• /
• 2004

To investigate changes of multi-purpose solutions for soft contact lens(MPS) depending on using period or keeping temperature, we evaluate four brands of MPS. No significant difference was seen in protein deposit removing efficacy after samples had used for 24 weeks and kept at $4^{\circ}C$, $20^{\circ}C$ or $30^{\circ}C$. The pH values of the samples of 4 brands measured weekly over the 24 week testing period. The initial average pH value of samples were 7.0, 7.5, 7.6 or 8.2. One brand of MPS was in the range of the threshold for ocular awareness, which is outside the zone of 6.6 ~ 7.8. During the testing period, the pH value were decreased in using period-dependent manner. At the 24th week, the average pH values of samples turned to 6.6, 7.2, 7.2 or 7.7. However, the difference of keeping temperature was not associated with decreased levels of pH values. After 24 weeks, one of total 36 samples was contaminated by bacteria. Furthermore, the change of components was shown after 24 weeks in the analysis using thin layer chromatography and the analysis of UV absorption pattern. The results of our study provides that the keeping temperature of MPS is not the important factor of changes of MPS, but the using period of MPS can cause contact lens wearers discomfort.

• Korean Journal of Poultry Science
• /
• v.19 no.1
• /
• pp.47-53
• /
• 1992

This study was carried out to determine the plasma vitamin $D_3$($D_3$) of 3 weeks old broiler chicks (Hubbard line), whose dorsal skin was exposed to different dose of 310 m UV light. The irradiated doses were 0~0.79 J/$\textrm{cm}^2$(6 doses$\times$5 replica＝30 chicks). The blood samples were collected 2 days after exposure. The lipid in plasma isolated was extracted with ethyl acetate. The $D_3$ was purified by $C_{18}$ cartridge and analyzed by HPLC. The average $D_3$ content in plasma of control chicks was 20 ng /$m\ell$. When 0.32 J/$\textrm{cm}^2$ of dose was treated, the highest amount of 43 ng /$m\ell$ was found among those of chicks experimented, corresponding to 2.15 times that of control. However, When more doses than 0.32 J/$\textrm{cm}^2$ were exposed to the skin, D$_3$ contents were decreased gradually. The similar to control level of $D_3$ was observed when 0.79 J/$\textrm{cm}^2$ was applied.

• The Korean Journal of Pesticide Science
• /
• v.21 no.1
• /
• pp.75-83
• /
• 2017

The single residue analytical method was developed for determining fungicide pencycuron residues in various agricultural commodities with high-performance liquid chromatography (HPLC). Pencycuron residue was extracted with acetone from representative crops such as Korean cabbage, apple, brown rice and green pepper. After ethyl acetate/n-hexane partition and subsequent clean-up with silica gel chromatography, pencycuron residue was quantified by reversed phase HPLC with UV detection at 240 nm. The suspected residue of pencycuron was confirmed using selected-ion monitoring (SIM) LC/mass spectrometry (MS). Instrumental limit of quantitation (ILOQ) and method LOQ (MLOQ) were set at 2 ng and 0.02 mg/kg, respectively. Overall recoveries of pencycuron from different crop samples fortified at three levels (MLOQ, 10MLOQ, 100MLOQ) were 72~108%. This proposed method could be useful as official analytical method for quantification of pencycuron residues in agricultural commodities.

• Composites Research
• /
• v.24 no.1
• /
• pp.45-50
• /
• 2011

Transparent and conductive carbon nanotube on polyethylene terephthalate (PET) were prepared by dip-coating method for self-sensing multi-functional nanocomposites. The changes in the electrical and optical properties of CNT coating mainly depended on the number of dip-coating, concentration of CNT solution. Consequently, the surface resistance and transmittance of CNT coating were sensitively controlled by the processing parameters. Surface resistance of CNT coating was measured using four-point method, and surface resistance of coated CNT could be better calculated by using the dual configuration method. Optical transmittance of PET film with CNT coating was evaluated using UV spectrum. Surface properties of coated CNT investigated by wettability test via static and dynamic contact angle measurement were consistent with each other. As dip-coating number increased, surface resistance of coated CNT decreased seriously, whereas the transmittance exhibited little lower due to the thicker CNT networks layer. Interfacial microfailure properties were investigated for CNT and indium tin oxide (ITO) coatings on PET substrates by electrical resistance measurement under cyclic loading fatigue test. CNT with high aspect ratio exhibited no change in surface resistance up to 2000 cyclic loading, whereas ITO with brittle nature showed a linear increase of surface resistance up to 1000 cyclic loading and then exhibited the level-off due to reduced electrical contact points based on occurrence of many micro-cracks.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.32 no.4 s.59
• /
• pp.227-231
• /
• 2006

Wrinkle formation is mainly attributed to the environmental factors such as UV rays, air pollution, smoking and stress etc. Especially, UV rays induce premature skin aging which is characterized by deep wrinkle, leathery dryness etc. Recently, researches on the wrinkle formation and its prevention have been the main theme in cosmetics fields. We have studied the various plant extracts having anti-wrinkle effects and finally showed that Noni (Morinda citrifolia) extracts have the efficacy of promoting the type I collagen synthesis in normal human fibroblast, using PICP assay. We purified one active compound from Noni extracts and identified its structure. It was identified as 6,7-Dimethoxy-2H-1-Benzopyran-2-one; scopoletin by $^1H-NMR,\;^{13}C-NMR,$ IR, Mass analysis. Scopoletin increased collagen synthesis in a dose dependent manner (89.5% at $0.2{\mu}g/mL$). In order to verify the anti-aging effectiveness of the cream containing 3% noni extracsts, we performed the in vivo test with some female volunteers for 12 weeks. It reduced the signs of aging, especially face wrinkles. From these results, we conclude that the noni extracts could be used as an useful anti-wrinkle agent.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.36 no.3
• /
• pp.167-174
• /
• 2010

The hair nourisher products are used for prevention of hair loss and classified as quasi-drug in Korea. As concerns about hair loss has been increased, the demand for hair nourisher products has been growing. It is difficult to analyze their main ingredients because they contain various ingredients including natural plant extracts, vitamins, preservatives and exfoliators. The purpose of this study was to develop and validate simultaneous analytical methods of active ingredients in hair nourisher products such as nicotinamide, tocopherol, salicylic acid, dexpanthenol and benzyl nicotinate by HPLC. The active ingredients were separated on a $C_{18}$ column by using acetonitrile/phosphate buffer as a mobile phase, and detected at UV 220, 270 and 300 nm. The calibration curve showed linearity in the range of $12.5{\sim}800\;{\mu}g/mL$ and the recoveries were 97.3 ~ 103.5 % (RSD 0.9 ~ 2.8 %) in liquid matrix and 101.9 ~ 115.9 % (RSD 0.7 ~ 7.7 %) in shampoo matrix. Validated method was applied to hair nourisher products obtained from distribution market. Fortunately, all samples met their criteria. This study might be expected to provide the method for determining active ingredients in hair nourisher products and lead to promote a rapid market entry.