• Smart Structures and Systems
• /
• v.8 no.5
• /
• pp.471-486
• /
• 2011

Various types of strain sensors have been developed and widely used in the field for monitoring the mechanical deformation of structures. However, conventional strain sensors are not suited for measuring large strains associated with impact damage and local crack propagation. In addition, strain sensors are resistive-type transducers, which mean that the sensors require an external electrical or power source. In this study, a gold nanoparticle (GNP)-based polymer composite is proposed for large strain sensing. Fabrication of the composites relies on a novel and simple in situ GNP reduction technique that is performed directly within the elastomeric poly(dimethyl siloxane) (PDMS) matrix. First, the reducing and stabilizing capacities of PDMS constituents and mixtures are evaluated via visual observation, ultraviolet-visible (UV-Vis) spectroscopy, and transmission electron microscopy. The large strain sensing capacity of the GNP-PDMS thin film is then validated by correlating changes in thin film optical properties (e.g., maximum UV-Vis light absorption) with applied tensile strains. Also, the composite's strain sensing performance (e.g., sensitivity and sensing range) is also characterized with respect to gold chloride concentrations within the PDMS mixture.

• Journal of the Korean Ceramic Society
• /
• v.46 no.4
• /
• pp.350-356
• /
• 2009

Perovskite codoped with chromium and iron have been studied. Samples with $YAl_{0.96}(Cr_{0.04-x}Fe_x)O_3$(x=0.01, 0.02, 0.03, 0.04) were prepared by solid state reaction at $1450^{\circ}C$ for 6 h and were characterized by XRD, FT-IR, Raman spectroscopy, SEM and UV-vis spectrophotometer. The color of the synthesized pigments were from red to dark brown(in bulk). Up to 0.02 mole $Fe_2O_3$ for substituting $Cr_2O_3$ development of color in lime-glaze gives good red color but as increasing amount of $Fe_2O_3$ and decreasing $Cr_2O_3$ proportionally produce from brownish red to brown. Increasing $Fe_2O_3$ amount lead to weaken crystal field relatively due to have smaller ionic radius than $Cr_2O_3$ ionic one. The UV-vis peaks were shifted to lower wavelength.

• Applied Chemistry for Engineering
• /
• v.25 no.6
• /
• pp.586-591
• /
• 2014

In this study, the diarylide compound pigment of high hiding power and vivid color was synthesized successfully by controlling several factors such as pH, coupler solution temperature, kind and addition amount of dispersion precursor, and crystallization temperature in the process of coupling synthesis. The properties of samples were measured by the means of FT-IR, UV-Vis spectroscopy, PSA, zeta potential, and turbiscan. It was found that the highly dispersive sample could be prepared by introducing the dispersive precursor.

• Applied Chemistry for Engineering
• /
• v.25 no.4
• /
• pp.357-362
• /
• 2014

To prepare diketopyrrolopyrrole (DPP) red 254 pigment with high shield and bright color, DPP red 254 crude previously synthesized was treated at various thermal-treat temperature, addition derivative and ball-milling. The properties of samples were measured by the means of FT-IR, UV-Vis spectroscopy, TEM, PSA, BET surface area analyzer, viscometer and spectrophotometer. It was found that solvent thermal-treatment of the sample prepared after ball-milling as nano-scale was very effective method in pigmentation process.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.1
• /
• pp.169-174
• /
• 2011

The synthesis of new pyrazolyl and cyclopropyl derivatives of purpurin-18 methyl ester and purpurin-18-N-butylimide 1a, 1b, 2a, 2b and 8 is described. The new compounds were characterized by NMR, UV-vis spectroscopy and mass spectrometry. UV-vis spectra of the new compounds showed long wavelength absorption of ranges 692 - 708 nm ($\lambda_{max}$). Photodynamic effects of the chlorin derivatives 1a, 1b, 2a and 2b were investigated by WST-1 assay in A549 cells, and showed good photodynamic activities with high photocytotoxicity and low cytotoxicity in the dark. In comparison between pyrazolyl and cyclopropyl derivatives, purpurin-18 methyl ester compounds 1a and 1b showed comparable photocytotoxicity result of the cell viabilities, otherwise, pyrazolyl derivative of purpurin-18-N-butylimide 2a showed better cell viabilities than those of cyclopropyl derivative 2b. And cyclopropyl derivative of purpurin-18-N-butylimide 2b showed higher dark cytotoxicity than that of others.

• Korean Journal of Materials Research
• /
• v.24 no.1
• /
• pp.33-36
• /
• 2014

This study was aimed at synthesizing and characterizing cerium-doped titania. Cerium-doped anatase titania powders were prepared by sol-gel process, with ammonium (IV) nitrate and titanium (IV) butoxide as the raw materials. The characteristics of pure $TiO_2$ and cerium-doped $TiO_2$ were investigated by XRD, TG/DTA, FE-SEM, and UV-vis spectroscopy. The results of this study show that anatase type of $TiO_2$ was obtained in as-prepared and calcined $TiO_2$ and Ce-$TiO_2$ powder. A DTA curve was also observed as the crystallization temperature decreased with increasing cerium contents. We found that the crystallite size of the obtained anatase particles decreased from 55 nm to 25 nm and the particle size decreased with increasing cerium contents. Moreover, UV-vis spectra showed that anatase titania powders with various cerium contents effectively extend the light absorption properties to the visible region.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.29 no.1
• /
• pp.35-39
• /
• 2016

In this research, we focused on the improvement of cy3 dye's characteristics for LCD color filter. Solubility and thermal stability are main characteristics of dyes for LCD color filter. We performed experiment to change counter cation of cy3 dyes with alkoxy substituent for these purposes. These cy3 dyes (1b~5b) were prepared through the synthetic procedure of three steps. The synthesized new cy3 dyes were charaterized by using NMR, FT-IR, UV/Vis spectroscopy, and TGA. These cy3 dyes showed purple color and maximum absorption wavelength (${\lambda}_{max}$) in the range of 578~590 nm in UV/Vis spectrum. We confirmed that solubility and thermal stability of cy3 dyes were dependent on the structure of counter cation. Cy3 dyes with alkoxy substituent have good solubility in organic solvents such as dichloromethane, methanol, and acetone. Especially, Cy3 dye with 4-nitrobenzyl counter cation (5b) gave excellent solubility characteristics.

• Applied Chemistry for Engineering
• /
• v.23 no.6
• /
• pp.614-617
• /
• 2012

Ti-containing zeolite was synthesised and used in the epoxidation of di-cyclopentadiene (DCPD). Among various Ti-zeolite catalysts, Y contained Ti-zeolite showed the highest yield in the epoxidation of DCPD. The study was also investigated in terms of the Ti content in the catalysts, $H_2O_2$/substrate ratio, reaction temperature and applied time. The reaction conditions significantly influenced on both the catalytic activity and selectivity. In addition, Ti structure in the zeolite was analyzed using IR and UV-vis spectroscopy.

• Korean Chemical Engineering Research
• /
• v.59 no.1
• /
• pp.112-117
• /
• 2021

In this study, a method of self-assembly of peptides based on irreversible covalent bonds was studied by mimicking a biological covalent bond, dityrosine bond. A tyrosine-rich short peptide monomer having the sequence of Tyr-Tyr-Leu-Tyr-Tyr (YYLYY) was selected to achieve a high-density of dityrosine bond. The peptide nanoparticles covalently self-assembled with dityrosine bonds were synthesized by one-step photo-crosslinking of a peptide using a ruthenium catalyst under visible light. The effect of the concentration of each component for the size of the peptide nanoparticle was studied using dynamic light scattering, UV-Vis spectroscopy, and transmission electron microscopy. As a result, the synthesis conditions for size of the peptide nanoparticles ranging from 130 nm to 350 nm were optimized.

• Corrosion Science and Technology
• /
• v.19 no.1
• /
• pp.16-22
• /
• 2020

It is important to realize that benzoate was intercalated into hydrotalcite (HTC-Bz) by the co-precipitation method. In this case, acrylic coating with 0.5 wt% HTC-Bz was deposited on carbon steel using the spin coating method. Next, the HTC-Bz structure was characterized by Field emission scanning electron microscopy (FESEM), X-ray diffraction (XRD), and Fourier transform infrared spectroscopy (FT-IR). In fact, an ultraviolet vision spectroscopy (UV-Vis) was used to determine the benzoate content in HTC-Bz, and the UV absorption ability of HTC-Bz. Using electrochemical techniques, water contact angle measurement, and thermal-gravimetric analysis, we compared the protective properties before and after QUV test, hydrophobicity and the thermal stability of acrylic coating containing HTC-Bz. The obtained results showed that HTC-Bz with a plate-like structure was successfully synthesized; benzoate was intercalated into the interlayer of hydrotalcite with a concentration of 28 wt%. Additionally, it was noted that HTC-Bz has an UV absorption peak at 225 nm. In conclusion, the addition of HTC-Bz enhanced the UV stability, hydrophobicity and the thermal stability of acrylic coating.