• Korean Journal of Food Science and Technology
• /
• v.51 no.6
• /
• pp.551-557
• /
• 2019

The purpose of this study was to investigate the changes of flavor and taste characteristics of black pepper treated with three different nonthermal sterilization methods, which are intense pulsed light (IPL), ultraviolet (UV), and cold plasma (CP). Also, the sensorial and instrumental evaluation of black pepper before and after nonthermal treatments were analyzed. As a result of color value, UV and CP treatments did not show chromacity difference (ΔE), but IPL treatment showed a significant difference of 6.58. Piperine contents of sample before nonthermal treatments was 10.7±0.53 mg/g and the piperine contents of all samples decreased after nonthermal treatments. The result of the electronic nose analysis were divided into two groups before and after nonthermal treatments, and divided into three group by principle component analysis. According to the intensity test, after nonthermal treatments, all sample had low flavor and taste, and the intensity was in the order of IPL, CP, and UV. In thirteen sensory attribute languages developed through quantitiative descriptive analysis (QDA), the intensity value of the samples were low after nonthermal treatments.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.6
• /
• pp.28-34
• /
• 1999

We fabricated a planar ultra-violet photodetector whose ohmic and schottky contacts were respectively formed with evaporated Al and Pt on the GaN layer. To examine the applicability of the device to the UV sensor, we investigated its electrical and optical characteristics. The GaN layer on the sapphire waver had $7.8{\times}10^{16}cm^{-3}$ of doping concentnation and the $138 cm^2/V{\cdot}s$ of electron mobility and it absorbed the spectrum of the light below 325 nm wavelength. It had the responsivity of 2.8 A/W of at 325 nm, and the signal to noise ratio(SNR) of $4{\times}10^4$, and the noise equivalent power(NEP) of $3.5{\times}10^9$W under 5 V reverse bias. These results confirmed that the GaN schottky diode had a solar blind properly when it was applied to the UV photodetector.

• Korean Journal of Materials Research
• /
• v.30 no.8
• /
• pp.383-392
• /
• 2020

In this paper, AgCl/Ag₃PO₄/diatomite photocatalyst is successfully synthesized by microemulsion method and anion in situ substitution method. X-ray diffraction (XRD), photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), transmission electron microscopy (TEM), and ultraviolet-visible spectroscopy (UV-Vis) are used to study the structural and physicochemical characteristics of the AgCl/Ag₃PO₄/diatomite composite. Using rhodamine B (RhB) as a simulated pollutant, the photocatalytic activity and stability of the AgCl/Ag₃PO₄/diatomite composite under visible light are evaluated. In the AgCl/Ag₃PO₄/diatomite visible light system, RhB is nearly 100 % degraded within 15 minutes. And, after five cycles of operation, the photocatalytic activity of AgCl/Ag₃PO₄/diatomite remains at 95 % of the original level, much higher than that of pure Ag₃PO₄ (40 %). In addition, the mechanism of enhanced catalytic performance is discussed. The high photocatalytic performance of AgCl/Ag₃PO₄/diatomite composites can be attributed to the synergistic effect of Ag₃PO₄, diatomite and AgCl nanoparticles. Free radical trapping experiments are used to show that holes and oxygen are the main active species. This material can quickly react with dye molecules adsorbed on the surface of diatomite to degrade RhB dye to CO₂ and H₂O. Even more remarkably, AgCl/Ag₃PO₄/diatomite can maintain above 95 % photo-degradation activity after five cycles.

• Journal of Radiation Protection and Research
• /
• v.32 no.2
• /
• pp.65-69
• /
• 2007

The effects of bamboo (Phyllostachys nigra var. henenis Strapf) leaf extract (BLE) on the changes of ultraviolet (UV) light B radiation-induced apoptotic sunburn cell (SBC) and epidermal ATPase-positive dendritic cell (DC) in SKH1-hr or ICR mouse were investigated. The mice were treated with UVB ($200mJ/cm^2$) and were sacrificed 24 hours later. BLE (50 mg/kg of body weight) or vehicle (saline) was given i.p. at 36 and 12 hours before irradiation, and 30 minutes after irradiation. BLE cream (0.2%) or cream base (vehicle) was also topically treated at 24 hours and 15 minutes before irradiation, and immediately after irradiation. The skin of SKH1-hr mouse prepared from the back of untreated mice exhibited about 0.3 SBC/cm length of epidermis, and 24 hours after UV irradiation, the applied areas show an increased number of SBCs. But the frequency of UVB-induced SBC formation was significantly reduced by intraperitoneal injection (59.0%) and topical application (31.8%) of BLE extract. The numbers of DC in normal ICR mouse were $628.00{\pm}51.56\;or\;663.20{\pm}62.58\;per\;mm^2$ of ear epidermis. By 1 day after UVB treatment, the number of ATPase-positive $cells/mm^2$ were decreased by 39.0% or 27.1% in i.p. or topical application group with vehicle. The frequency of UVB ($200mJ/cm^2$)-induced DC decrease was reduced by treatment of BLE as 25.7% in i.p. group and 3.2% in topical application group compared with the irradiation control group. The results presented herein that BLE administration could reduce the extent of skin damages produced by UVB.

• Animal cells and systems
• /
• v.3 no.2
• /
• pp.229-236
• /
• 1999

The recA gene plays a central role in genetic recombination and SOS DNA repair in Escherichia coli (E. coli). We have previously identified a 42 kDa RecA-like protein inducible by a variety of DNA damages from a fluorescent Pseudomonas strain sp. and characterized its inducible kinetics. In the present study, we cloned and characterized the gene encoding the RecA-like protein by immunological screening of Pseudomonas genomic expression library using polyclonal E. coli anti-RecA antibodies as a probe. From 10$^{5}$ plaques screened, five putative clones were finally isolated. Southern blot analysis indicated that four clones had the same DNA inserts and the recA-like gene was located within the 3.2 kb EcoRI fragment of Pseudomonas chromosomal DNA. In addition, the cloned recA-like gene was transcribed into an RNA transcript approximately 1.1 kb in size, as judged by Northern blot analysis. The cellular level of RNA transcript of the cloned recA-like gene was increased to an average of 5.15- fold upon treatment with DNA damaging agents such as ultraviolet (UV)- light, nalidixic acid (NA), methyl methanesulfonate (MMS), and mitomycin-C (MMC). These results suggest that the cloned gene is inducible by DNA damage similarly to the recA gene in E. coli. However, the cloned gene did not restore the DNA damage sensitivity of the E. coli recA-mutant.

• Polymer(Korea)
• /
• v.32 no.4
• /
• pp.366-371
• /
• 2008

The controlled/living cationic polymerization of $\alpha$-methylstyrene (${\alpha}MeSt$) and sequential block copolymerization of isobutylene (IB) with ${\alpha}MeSt$ were achieved using 2-chloro-2,4,4-trimethylpentane (TMPCl)/titanium tetrachloride ($TiCl_4$)/titanium isopropoxide ($Ti(OiPr)_4$)/2,6-ditert-butylpyridine (DtBP) initiating system in $CH_3Cl$/hexane(50/50 v/v) solvent mixture at $-80^{\circ}C$. The polymerization rate decreased with increasing $[Ti(OiPr)_4]/[TiCl_4]$ ratio in the homopolymerization of ${\alpha}MeSt$. The effects of $[Ti(OiPr)_4]/[TiCl_4]$ ratios and $PIB^+$ molecular weight on the polymerization rate and blocking efficiency were also investigated. Well-defined poly(isobutylene-b-$\alpha$-methylstyrene)s were demonstrated by $^1H$-NMR and triple detection SEC; refractive index (RI), multiangle laser light scattering (MALLS) and ultraviolet (UV) detectors. Blocking efficiencies for the poly(isobutylene-b-$\alpha$-methylstyrene)s of almost 100% were obtained when ${\alpha}MeSt$ was induced by PIB's of $M_n\;{\geq}\;41000$ at $[Ti(OiPr)_4]/[TiCl_4]=1$. Differential scanning calorimetry (DSC) of the block copolymers showed two glass transition temperatures, thereby demonstrating microphase separation.

• New & Renewable Energy
• /
• v.16 no.3
• /
• pp.1-12
• /
• 2020

Shingled technology is the latest cell interconnection technology developed in the photovoltaic (PV) industry due to its reduced resistance loss, low-cost, and innovative electrically conductive adhesive (ECA). There are several advantages associated with shingled technology to develop cell to module (CTM) such as the module area enlargement, low processing temperature, and interconnection; these advantages further improves the energy yield capacity. This review paper provides valuable insight into CTM loss when cells are interconnected by shingled technology to form modules. The fill factor (FF) had improved, further reducing electrical power loss compared to the conventional module interconnection technology. The commercial PV module technology was mainly focused on different performance parameters; the module maximum power point (Pmpp), and module efficiency. The module was then subjected to anti-reflection (AR) coating and encapsulant material to absorb infrared (IR) and ultraviolet (UV) light, which can increase the overall efficiency of the shingled module by up to 24.4%. Module fabrication by shingled interconnection technology uses EGaIn paste; this enables further increases in output power under standard test conditions. Previous research has demonstrated that a total module output power of approximately 400 Wp may be achieved using shingled technology and CTM loss may be reduced to 0.03%, alongside the low cost of fabrication.

• Korean Journal of Plant Resources
• /
• v.32 no.6
• /
• pp.633-643
• /
• 2019

Long-term ultraviolet (UV) exposure accelerates the phenomenon of skin photo-aging by activating collagenase and elastase. In this study, we aimed to investigate the effects of a combination of grapefruit and rosemary extracts (cG&Re) on UVB-irradiated damage in HaCaT cells and dorsal mouse skin. In HaCaT cells, cG&Re recovered UVB-reduced cell viability and inhibited protein expression of mitogen-activated protein kinases (MAPKs), such as extracellular signal-regulated kinases (p-Erk), c-Jun N-terminal kinases (p-JNK), and a class of MAPKs (p-P38). Also, cG&Re suppressed UVB-induced collagen and elastin degradation by decreasing matrix metalloproteinases (MMPs) and nuclear factor kappa light chain enhancer of activated B cells (NF-κB) expression, which is a transcription factor. Similar results were observed in dorsal mouse skin. Taken together, our data indicate that cG&Re prevent UVB-induced skin photo-aging due to collagen/elastin degradation via activation of MAPKs, MMPs, and the NF-κB signaling pathway in vitro and in vivo.

• Journal of Powder Materials
• /
• v.25 no.3
• /
• pp.257-262
• /
• 2018

The coupling of two semiconducting materials is an efficient method to improve photocatalytic activity via the suppression of recombination of electron-hole pairs. In particular, the coupling between two different phases of $TiO_2$, i.e., anatase and rutile, is particularly attractive for photocatalytic activity improvement of rutile $TiO_2$ because these coupled $TiO_2$ powders can retain the benefits of $TiO_2$, one of the best photocatalysts. In this study, anatase $TiO_2$ nanoparticles are synthesized and coupled on the surface of rutile $TiO_2$ powders using a microemulsion method and heat treatment. Triton X-100, as a surfactant, is used to suppress the aggregation of anatase $TiO_2$ nanoparticles and disperse anatase $TiO_2$ nanoparticles uniformly on the surface of rutile $TiO_2$ powders. Rutile $TiO_2$ powders coupled with anatase $TiO_2$ nanoparticles are successfully prepared. Additionally, we compare the photocatalytic activity of these rutile-anatase coupled $TiO_2$ powders under ultraviolet (UV) light and demonstrate that the reason for the improvement of photocatalytic activity is microstructural.

• Journal of Food Hygiene and Safety
• /
• v.35 no.3
• /
• pp.205-212
• /
• 2020

Foodborne diseases occur frequently and have various being related to the intake of contaminated foods. Seafood products are susceptible to contamination due to higher water content and microorganisms, which combine to give them a short shelf-life. Various approaches have been applied to overcome this problem. Edible coatings that are also biodegradable and biocompatible have been discussed as one of the applicable solutions. These coatings can actually help to maintain seafood quality by inhibiting the growth of microorganisms and delaying the loss of moisture. This paper presents the effects of various natural bio-polymers, antimicrobial substances and physical sterilization techniques such as gamma irradiation, ultraviolet (UV) sterilization, and light-emitting diode (LED) sterilization on seafood coatings.