• Journal of Satellite, Information and Communications
• /
• v.11 no.4
• /
• pp.68-73
• /
• 2016

This paper describes the prototyping of CDMA bi - directional group search system using USRP and LTE. This paper describes the results of RF signal generation and transmission by implementing a spread spectrum signaling system, which is a new standard of COSPAS SARSAT, using a bi-directional search structure system using commercial LTE network and USRP.

• Journal of Korea Society of Industrial Information Systems
• /
• v.23 no.4
• /
• pp.23-31
• /
• 2018

This paper presented the implementation and design of the 2T-2R wireless HD video streaming systems over 1.7 GHz frequency band using 3GPP LTE-TDD standard on NI USRP RIO SDR platform. The baseband of the system used USRP RIO that are stored in Xilinx Kintex-7 chip to implement LTE-TDD transceiver modem, the signal that are transmitted from USRP RIO up or down converts to 1.7 GHz by using self-designed 1.7 GHz RF transceiver modules and it is finally communicated HD video data through self-designed 2x9 sub array antennas. It is that communication method between USRP RIO and Host PC use PCI express x4 to minimize delay of data to transmit and receive. The implemented system show high error vector magnitude performance above 32 dBc and to transmit and receive HD video in experiment environment anywhere. The proposed hybrid beam forming system could be used not only in the future 5G mobile communication systems under 6 GHz frequency band but also in the systems over 6 GHz frequency band like ones in mmWave frequency bands.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.5
• /
• pp.445-453
• /
• 2016

This paper presents the implementation and design of the 1T-1R wireless HD video streaming systems over 28 GHz mmWave frequency using 3GPP LTE-TDD standard on NI USRP RIO SDR platform. The baseband of the system uses USRP RIO that are stored in Xilinx Kintex-7 chip to implement LTE-TDD transceiver modem, the signal that are transceived from USRP RIO up or down converts to 28 GHz by using self-designed 28 GHz RF transceiver modules and it is finally communicated HD video data through self-designed $4{\times}8$ sub array antennas. It is that communication method between USRP RIO and Host PC use PCI express ${\times}4$ to minimize delay of data to transmit and receive. The implemented system show high error vector magnitude performance above 25.85 dBc and to transceive HD video in experiment environment anywhere.

• International Journal of Internet, Broadcasting and Communication
• /
• v.10 no.1
• /
• pp.1-10
• /
• 2018

In cognitive radio (CR), secondary users (SUs) are able to sense the absence of primary users (PUs) in the spectrum. Then, SUs use this information to opportunistically access the licensed spectrum in the PUs' absence. In this paper, we present an implementation of real-time video transmission with spectrum-sensing between two points using GNU Radio and a National Instruments 2900 Universal Software Radio Peripheral (USRP). In our project, spectrum-sensing is implemented at both transmitter and receiver. The transmitter senses the channel, and if the channel is free, a video signal (which could be a real-time signal from a video file) will be modulated and processed by GNU Radio and transmitted using a USRP. A USRP receiver also senses the channel, but in contrast, if the channel is busy, the signal is demodulated to reproduce the transmitted video signal. This project brings in several challenges, like spectrum-sensing in the devices' environment, and packets getting lost or corrupted over the air.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.28 no.4
• /
• pp.347-350
• /
• 2017

In this paper, we implemented a real-time 2.4 GHz direction finding system using a time-modulated array(TMA) and an Universal Software Radio Peripheral(USRP). Our system consists of two commercial monopole antennas, self-designed switch board, and an USRP, and it is controlled using LabVIEW program in real-time. From measured results, it is verified that our system can exactly detect the incident angle within 4 degree in the range of 30 degree. Our direction finding system has advantages of a simple hardware architecture than conventional one with multiple receivers, and a simple algorithm only by using a main lobe and a first side-lobe of switching frequency.

• Journal of Positioning, Navigation, and Timing
• /
• v.6 no.1
• /
• pp.1-8
• /
• 2017

In this study, to design a multi-GNSS receiver using single RF front-end, the receiving performances for various frequency plans were evaluated. For the fair evaluation and comparison of different frequency plans, the same signal needs to be received at the same time. For this purpose, two synchronized RF front-ends were configured using USRP X310, and PC-based software was implemented so that the quality of the digital IF signal received at each front-end could be evaluated. The software consisted of USRP control, signal reception, signal acquisition, signal tracking, and C/N0 estimation function. Using the implemented software and USRP-based hardware, the signal receiving performances for various frequency plans, such as the signal attenuation status, overlapping of different systems, and the use of imaginary or real signal, were evaluated based on the C/N0 value. The results of the receiving performance measurement for the various frequency plans suggested in this study would be useful reference data for the design of a multi-GNSS receiver in the future.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.11
• /
• pp.1214-1219
• /
• 2010

In this paper, a software radio system, supporting the physical layer of IEEE 802.15.4 standard, has been developed using USRP(Universal Software Radio Peripheral) board and GNU Radio package of an open source development kit for software radio. The software radio system supports the standards of BPSK and OQPSK modulations for 868/915 MHz band and OQPSK modulation for 2.45 GHz band. To verify the operation of the developed system, it has been tested under the standard signals according to the frequency band and packet structures for the transmitting and receiving operation. At 2.4 GHz, the Smart RF EV board and CC2430 modules are used to check the proper operation of the software radio system. The system performance test shows that the emission power spectrum, the eye-pattern, and PER(Packet Error Rate) meet the standard. It has been confirmed that the developed system supports the PHY layer of IEEE 802.15.4.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.1
• /
• pp.88-91
• /
• 2016

In this paper, we have proposed the frequency interference analysis system using both LabVIEW and Universal Software Radio Peripheral(USRP) for performance degradation analysis of Multi Input Multi Output-Orthogonal Frequency Division Multiplexing(MIMO-OFDM) Wireless Local Area Network(WLAN) due to Wireless Local Area Network(WPAN) interferer. The proposed system consists of three part, i.e., victim, channel, and interferer. Both victim and interferer are implemented by LaBVIEW and a USRP board. Then interfering signal and additive white Gaussian noise are combined with the wanted signals of a victim. Measured Bit Error Rate(BER) at the victim receiver is compared with theoretical BER according to various signal to interference plus noise power ratio (SINR) values. Measured and theoretical BER curves show good agreement.

• Journal of Positioning, Navigation, and Timing
• /
• v.5 no.1
• /
• pp.11-20
• /
• 2016

In this paper, a system that can collect GPS L1 C/A, GLONASS G1, and BDS B1I signals with single front-end receiver was implemented using a universal software radio peripheral (USRP) and its performance was verified. To acquire the global navigation satellite system signals, hardware was configured using USRP, antenna, external low-noise amplifier, and external oscillator. In addition, a value of optimum local oscillator frequency was selected to sample signals from three systems with L1-band with a low sampling rate as much as possible. The comparison result of C/N0 between the signal collection system using the proposed method and commercial receiver using double front-end showed that the proposed system had 0.7 ~ 0.8dB higher than that of commercial receiver for GPS L1 C/A signals and 1 ~ 2 dB lower than that of commercial receiver for GLONASS G1 and BDS B1I. Through the above results, it was verified that signals collected using the three systems with a single USRP had no significant error with that of commercial receiver. In the future, it is expected that the proposed system will be combined with software-defined radio (SDR) and advanced to a receiver that has a re-configuration channel.

• Journal of Satellite, Information and Communications
• /
• v.7 no.1
• /
• pp.39-47
• /
• 2012

Currently, most of the frequency spectrum resources are allocated and due to the lack of frequency, low frequency band, optimal for wireless communication environment is not used. Therefore, Cognitive Radio (CR) is a critical issue to solve the spectrum scarcity and to improve frequency spectrum utilization in wireless communication. In this paper, we implement data transmission and receive in a real CR system using the USRP(Universal Software Radio Peripheral) board and GNU Radio package of an open source development kit. Concretely, we detect the Primary User by spectrum sensing, and then we send Primary User information to the database. After receiving the information, because the database already sent optimal transmit power, bandwidth and channel information to CR equipment, CR can communicate without any interference to Primary User.