• Title/Summary/Keyword: USB2.0

Search Result 48, Processing Time 0.023 seconds

Developing Management System of Medical Image Information with USB 2.0 (USB 2.0을 활용한 의료 영상정보 관리시스템 개발)

  • Choi, Jung-Sang
    • Journal of Korean Society of Industrial and Systems Engineering
    • /
    • v.29 no.2
    • /
    • pp.51-57
    • /
    • 2006
  • This study is concerned with image information management system for small scale hospital. We intended to developing image management system which is used of the existing analog devices such as medical camera, supersonic analyser, endoscope etc. We developed a video in interface board based USB 2.0 for handling image in real time. It is capable of transmitting image input signal like as NTSC, PAL to personal computer through USB 2.0. The developed the board of 40 speeds compared with the exiting system based USB 1.0. Especially the developed system is very helpful for small hospital like as dental clinic, because it is easy and convenient to manage image information without expert. So it will provide reduction of time and cost for handling image information(collecting, saving, retrieval, transmitting image).

A UTMI-Compatible USB2.0 Transceiver Chip Design (UTMI 표준에 부합하는 USB2.0 송수신기 칩 설계)

  • Nam Jang-Jin;Kim Bong-Jin;Park Hong-June
    • Journal of the Institute of Electronics Engineers of Korea SD
    • /
    • v.42 no.5 s.335
    • /
    • pp.31-38
    • /
    • 2005
  • The architecture and the implementation details of a UTMI(USB2.0 Transceiver Macrocell Interface) compatible USB2.0 transceiver chip were presented. To confirm the validation of the incoming data in noisy channel environment, a squelch state detector and a current mode Schmitt-trigger circuit were proposed. A current mode output driver to transmit 480Mbps data on the USB cable was designed and an on-die termination(ODT) which is controlled by a replica bias circuit was presented. In the USB system using plesiochronous clocking, to compensate for the frequency difference between a transmitter and a receiver, a synchronizer using clock data recovery circuit and FIFO was designed. The USB cable was modeled as the lossy transmission line model(W model) for circuit simulation by using a network analyzer measurements. The USB2.0 PHY chip was implemented by using 0.25um CMOS process and test results were presented. The core area excluding the IO pads was $0.91{\times}1.82mm^2$. The power consumptions at the supply voltage of 2.5V were 245mW and 150mW for high-speed and full-speed operations, respectively.

Implementation of an USB Camera Interface Based on Embedded Linux System (임베디드 LINUX 시스템 기반 USB 카메라 인터페이스 구현)

  • Song Sung-Hee;Kim Jeong-Hyeon;Kim Tae-Hyo
    • Journal of the Institute of Convergence Signal Processing
    • /
    • v.6 no.4
    • /
    • pp.169-175
    • /
    • 2005
  • In recent, implementation of the embedded system is gradually in the spotlight of world-wide by information technology(IT) engineers. By this time, an implementation of real time system is limited on image acquisition and processing system in practical. In this paper, the USB camera interface system based on the embedded linux OS is implemented using USB 2.0 camera with low cost. This system can obtain image signals into the memory via X-hyper255B processor from USB camera. It is need to initialize USB camera by the Video4Linux for the kernel device driver. From the system image capturing and image processing can be performed. It is confirmed that the image data can be transformed to packet of Network File System(NFS) and connected to the internetwork, then the data can be monitored from the client computer connected to the internetwork.

  • PDF

Trend of Wireless USB Technology and WiMedia Standardization (무선 USB 기술 및 WiMedia 표준화 동향)

  • Lee, H.J.;Baek, S.H.;Huh, J.D.
    • Electronics and Telecommunications Trends
    • /
    • v.21 no.5 s.101
    • /
    • pp.11-20
    • /
    • 2006
  • USB는 사용의 편리성, 넓은 확장성을 기반으로 PC 역사상 가장 성공적인 접속 장치로서, 현재까지 20억 개 이상이 사용되고 있고, USB가 장착된 장치의 종류 및 사용 개수도 빠르게 증가하는 추세이다. 이와 같은 USB의 발전에 힘입어 유선의 속도와 보안성에 무선의 편리함을 추가한 무선 USB 1.0 규격이 2005년 5월 발표되었으며, 상용 제품도 속속 출시되고 있다. 본 고는 유선 USB 2.0 기술에 기반하고 무선 매체로서UWB를 이용하는 무선 USB의 기술 및 표준화 동향에 대하여 소개하고, 무선 USB 기술의 특징 및 국내외 연구 동향에 대하여 살펴보고자 한다.

Proposal Implement USB 2.0 API Module for VMM (VMM의 USB 2.0 API 사용을 위한 모듈제안)

  • Zhe, Xu Yong;Lee, Min-Soon;Kim, Jun-Hwan;Lee, Byoung-Soo
    • Proceedings of the Korean Information Science Society Conference
    • /
    • 2008.06b
    • /
    • pp.451-455
    • /
    • 2008
  • PC 기술의 발전으로 사용자는 하나의 물리적인 컴퓨터에서 서로 다른 운영체제를 실행하는 작업이 가능하게 되고 서버에서는 하드웨어의 교체로 인한 특정(MIPS, PowerPC)하드웨어에서 서비스 되고 있는 프로그램을 다른 하드웨어에 이식하는 경우의 재개발 비용 없이 성능을 개선할 수 있게 되었다.Virtualization 기술은 PowerPC기반의 서버 프로그램을 X86기반의 개인용 컴퓨터에 이식하는 경우와 같이 다양한 하드웨어 프로그램 개발 환경을 제공해 준다. 본 논문에서는 일반 사용자가 Virtualization을 사용하여 USB 장치를 사용할 수 있게 하는 다양한 방법들을 논한다. 이를 구현하기 위해 리눅스 커널 2.6의 특징인 모듈화를 이용하며 USB 디바이스에 대한 가상화 모듈을 구현하여 VMM (Virtual Machine Monitor)이 USB를 지원하도록 한다. 따라서 GuestOS(가상화하여 실행중인OS)에서는 별도의 개발 없이 USB를 사용할 수 있다.

  • PDF

Internal Hook-shaped Patch Antenna for Multiband Wireless USB Dongle Applications (다중대역 무선 USB 동글용 내장 Hook형 안테나)

  • Jeong, Seong-Jae;Hwang, Keum-Cheol;Shin, Jae-Ho
    • Journal of the Institute of Electronics Engineers of Korea TC
    • /
    • v.47 no.11
    • /
    • pp.91-96
    • /
    • 2010
  • In this paper, an internal USB dongle antenna with a circular hook-shaped patch is proposed. The proposed antenna comprises of a circular hook-shaped patch and a monopole stub. The proposed antenna with the dimension of $10mm{\times}50mm{\times}0.8mm$ was fabricated on commercial FR-4 substrate with a dielectric constant of 4.6 and tangent loss of 0.025. The designed antenna exhibits three different resonant bandwidths, 2.4 GHz-2.5 GHz, 3.4 GHz-3.6 GHz, and 5.15 GHz-5.825 GHz. The measured radiation patterns are omni-directional at measured frequencies. Therefore, the proposed antenna is suitable for wireless USB dongle antenna that can support multiband wireless services such as WLAN, WiMAX and Bluetooth.

A Study on the Technology for Envionmental Measurement Using Smartphone USB OTG (스마트폰 USB OTG를 활용한 환경 측정 기술에 관한 연구)

  • Son, Youngdal;Eun, Changsoo
    • Proceedings of the Korea Contents Association Conference
    • /
    • 2016.05a
    • /
    • pp.7-8
    • /
    • 2016
  • 이 논문에서는 스마트폰의 USB 포트를 활용하여 환경 데이터를 측정할 수 있는 기술을 제시한다. 스마트폰의 USB OTG 기능을 사용하여 스마트폰 배터리의 전원을 외부 하드웨어 단말기로 공급하고 USB 통신으로 데이터를 전송하였다. 이 방식은 외부 하드웨어 단말기에 별도의 전원과 표시장치, 메모리가 필요없어 간단한 구조의 설계가 가능하다. 이산화탄소와 온도, 습도를 측정할 수 있는 하드웨어 단말기를 제작하여 스마트폰 USB OTG를 사용하여 무전원 환경 측정 단말기의 제작이 가능함을 확인하였다. 스마트폰 단말기 사양마다 다소의 차이는 있지만, 5[V] 200[mA] 이상의 전류와 12[Mbps] USB2.0 Full speed 속도의 통신을 외부 하드웨어 단말기에 공급할 수 있으므로 휴대용 측정 단말기에 사용 가능하다는 결론을 내릴 수 있다.

  • PDF

Development of a real time surface and under water image integrating system for Korea artistic swimming team (국가대표 아티스틱 스위밍팀 지원을 위한 실시간 수상 수중 영상 통합 시스템 개발)

  • Min, Seokki;Lee, Sangcheol;Kim, Taewhan;Kil, Sekee;Kim, Ji-eun
    • Journal of the Korea Convergence Society
    • /
    • v.11 no.1
    • /
    • pp.25-31
    • /
    • 2020
  • In this study, a real time image integrating system which can reconstruct two images from a surface camera and an under water camera into one new image was developed to support Korea artistic swimming team. The developed system consists of four USB cameras (two USB 2.0 and two USB 3.0) sealed in water proof case and one note book computer, and a LabVIEW based real time image merging program was developed. During field test, problem in cooperative motion of acrobatic formation was found, and it was proved that correction of motion to improve skill of the player could be possible in real time with aid of the developed system. After the filed test, the developed system has been being used to support Korea artistic swimming team.

Design of a Multiband MIMO Antenna for USB Dongle Application (USB Dongle에 적용을 위한 다중 대역 MIMO 안테나 설계)

  • Lee, Young-Ki;Choi, Jea-Hoon
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.23 no.4
    • /
    • pp.441-448
    • /
    • 2012
  • This paper proposes a multiband Multi-Input Multi-output(MIMO) antenna for universal serial bus(USB) dongle application. The proposed MIMO antenna consists of a modified meander strip line and inverted L stub. The two radiating elements of the MIMO antenna are symmetrically placed with respect to the center of the ground plane. The fabricated antenna satisfied a VSWR below 3 and an efficiency over 35 % in the LTE band 13, 17(704 MHz-787 MHz), DCS/PCS/WCDMA band(1.71 GHz-2.17 GHz), and LTE band 7(2.5 GHz-2.7 GHz). The envelope correlation coefficient(ECC) has below 0.45 in the LTE band 13, 17 and 0.1 in the DCS/PCS/WCDMA band and LTE band 7, respectively.

Design of High Speed Data Acquisition System for GNSS Receiver (GNSS 수신기용 고속데이터 수집장치 설계)

  • Park Chan-Sik;Kim Tae-Ho;Lee Hak-Ju;Jo Jong-Cheol;Lee Sang-Jeong;Cha Eun-Jong
    • Proceedings of the Korean Institute of Intelligent Systems Conference
    • /
    • 2006.05a
    • /
    • pp.249-253
    • /
    • 2006
  • 본 논문에서는 USB 2.0을 이용하여 고속 GNSS 데이터 수집장치 설계 및 구현을 하였으며 16bit, 5.714MHz의 샘플링 시간을 만족 시키기 위해 USB 펌웨어, 디바이스 드라이버, 응용프로그램 그리고 하드웨어부인 RF, 마이크로프로세서, USB을 설계 및 제작하여 실험 하였고 SDR 프로그램을 통하여 확인하였다.

  • PDF