• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.10
• /
• pp.2337-2342
• /
• 2010

There is a vast field of application for RFID(Radio Frequency IDentification) technology. In the case of hospitals, RFID can be used for organizing patient data. Generally, patient data has been handled with medical cards. In order to look up data about a patient, the medical card would have to be found first, within a lot of other medical cards, by hand or with a computer. This is a very inconvenient system. Also, if the card is searched by the name of the patient, fatal medical accidents may occur in cases of mix-ups. If remote RFID Tag monitoring systems are applied in this case, the patient data would be accessible in the hospital. This article will discuss the grafting of RFID systems and wireless data communicating technology. The EM4095 chip, which uses 125KHz carrier waves was used in this study. And a Bluetooth module was added for wireless data communication. The ATMEGA128 microcomputer was used to control the RFID system and wireless module. A LCD monitor was connected to the extension port for nurses to view patient data, and also, the same information was displayed on PC monitors for doctors to see. The circuit was designed to consume minimal amounts of electricity for portability, and to transmit Tag ID's in environments with a lot of noise. The article is concluded with a diagram of the whole system, and performance of each data transmitting section has been analyzed.

• Journal of the Korean Data and Information Science Society
• /
• v.23 no.4
• /
• pp.787-796
• /
• 2012

The aim of this study is to closely examine the changes in their metabolic syndrome index and autonomic nerve systems after the 16-weeks's combined exercise program is carried out on low-level physical strength group (PAPS 4-5 level students). They were divided into two groups; exercise training group (15) and control group (15). This program consisted of five-times-a-week's warm-ups, main activities and warm-downs and it takes 50 minutes per trial. Through SPSS 19.0, all averages and standard deviations of dependent variables were calculated. We first performed Shapiro-Wilk's normality test of the variables. Before verifying the effect of combined exercise program, we tested the equality of means of the variables between combined-exercise-programmed-group and control group through a two-sample t-test and carried out a paired t-test to check if the changes in the variables of two groups before and after 16 weeks are statistically significant. Every statistical test is performed at a significance level of ${\alpha}$=.05. The results are as follows. When it came to metabolic syndrome index, there were statistically meaningful changes in waist measurement, triglyceride, glucose with empty stomach and HDL-C. Also, when it came to autonomic nerve system, there were meaningful changes in all variables. Consequently, it seems that the 16-weeks combined exercise program has positive effects on low level physical strength students.

• Clean Technology
• /
• v.27 no.4
• /
• pp.277-290
• /
• 2021

A supercapacitor, also called an ultracapacitor or an electrochemical capacitor, stores electrochemical energy by the adsorption/desorption of electrolytic ions or a fast and reversible redox reaction at the electrode surface, which is distinct from the chemical reaction of a battery. A supercapacitor features high specific power, high capacitance, almost infinite cyclability (~ 100,000 cycle), short charging time, good stability, low maintenance cost, and fast frequency response. Supercapacitors have been used in electronic devices to meet the requirements of rapid charging/discharging, such as for memory back-up, and uninterruptible power supply (UPS). Also, their use is being extended to transportation and large industry applications that require high power/energy density, such as for electric vehicles and power quality systems of smart grids. In power generation using intermittent power sources such as solar and wind, a supercapacitor is configured in the energy storage system together with a battery to compensate for the relatively slow charging/discharging time of the battery, to contribute to extending the lifecycle of the battery, and to improve the system power quality. This article provides a concise overview of the principles, mechanisms, and classification of energy storage of supercapacitors in accordance with the electrode materials. Also, it provides a review of the status of recent research and patent, product, and market trends in supercapacitor technology. There are many challenges to be solved to meet industrial demands such as for high voltage module technologies, high efficiency charging, safety, performance improvement, and competitive prices.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.19 no.6
• /
• pp.163-179
• /
• 2020

With the expansion of platform-based taxi service, mobility and convenience of users are getting better. However, due to profitability problem, marginalized areas in the supply of the service are expected to appear. As such, this study analyzed spatial marginalization of taxi service caused by imbalance in supply and demand during the night-time when public transportation service is suspended. According to hot-spot analysis of taxi, outskirt of a city and residential areas showed high vacancy and greater number of drop-offs compared to the number of pick-ups. On the contrary, they were confirmed low in the center and sub-centers of a city. Centrality analysis also showed a similar pattern with hot-spot analysis. Due to this, drivers may refuse to pick up a customer bound for an area with lower out-degree centrality compared to in-degree centrality as it might be difficult for the drivers to pick up another customer after dropping off the current customer. Thus, customers may need to wait for a taxi for a longer time. For this reason, improvement in spatial marginalization caused by mismatch of supply and demand is required. Also, the outcome of this study is expected to be utilized as a basic data.

• Journal of Convergence for Information Technology
• /
• v.11 no.6
• /
• pp.83-98
• /
• 2021

This study identified the influence of employees' hybrid start-up intention (intention to start a business while maintaining a job) on the employees' self-determination motivation (intrinsic motivation, extrinsic motivation) and prior knowledge through the Model of Goal-directed Behavior (MGB). We used a PLS-SEM called SmartPLS 3.0 for 126 valid samples collected by judgement extraction for office workers throughout June 13, 2020 to July 3, 2020, and empirically evaluated the measurement model (internal consistency reliability, convergent and discriminant validity) and the structural model (multicollinearity, determination coefficient, effect size, predictive relevance, etc.). Only the intrinsic motivation for realizing the hybrid start-up goal of office workers had a significant impact on the hybrid start-up attitude and subjective norms, and the prior knowledge of hybrid start-up had a significant impact on the hybrid start-up desire and the hybrid start-up intention. In order to induce hybrid start-ups for workers with unstable employment, we need systems and programs that can inspire employees with intrinsic motivation and knowledge about hybrid start-up, so follow-up researches are necessary to analyze about government systems and consulting support that can promote hybrid start-up.

• Journal of Korea Society of Industrial Information Systems
• /
• v.25 no.6
• /
• pp.171-192
• /
• 2020

The purpose of this study is, first, to empirically verify the relationship between the influences of the start-up performance and the inherent fear factor of failure on the start-up performance through the preparation of the start-up. Second, this study aims to prove the influence of the moderating effect of social support on the relationship between start-up preparation and the burden of start-up failure. The research subjects were sampled and analyzed by 298 start-ups who are currently starting their own businesses. This study founds that preparation of start-up items, which is a subordinate theory of start-up preparation, had a significant effect on start-up performance, and that anxiety about failure had a significant effect on start-up performance. Using the SPSS statistical program, the hierarchical regression analysis proved the moderating effect of social support in the relationship between star-tup preparation, start-up failure burden and startup performance. Furthermore, the moderating effect of social support among start-up preparation, start-up failure burden and start-up achievement was analyzed, but no significant results were found for start-up failure burden. Besides, the effect of the opposite concept of independent variables on the dependent variables at the same time is to be analysed.

• Information Systems Review
• /
• v.21 no.1
• /
• pp.135-152
• /
• 2019

Recently there are many development and support policies for start-up companies because of successful venture companies related to ICT services. However, as these policies have focused on the support for the initial stage of start-up, many start-up companies have difficulties to continuously grow up. The main reason for these difficulties is that they recognize start-up tasks as independent activities. However, many experts or related articles say that start-up tasks are composed of related processes from the initial stage to the stable stage of start-up firms. In this study, we models the start-up processes based on the survey collected by the start-up companies, and analyze the start-up process of ICT service companies with process mining techniques. Through process mining analysis, we can draw a sequential flow of tasks for start-ups and the characteristics of them. The analysis of start-up businessman, idea derivation, creating business model, business diversification processes are resulted as important processes, but marketing activity and managing investment funds are not. This result means that marketing activity and managing investment funds are activities that need ongoing attention. Moreover, we can find temporal and complementary tasks which could not be captured by independent individual-level activity analysis. Our process analysis results are expected to be used in simulation-based web-intelligent system to support start-up business, and more cumulated start-up business cases will be helpful to give more detailed individual-level personalization service. And our proposed process model and analyzing results can be used to solve many difficulties for start-up companies.

• Information Systems Review
• /
• v.20 no.2
• /
• pp.63-85
• /
• 2018

Emerging hotspot and trendy areas are formed into alleys and blocks with the help of viral effects among social network services (SNS) users called "Golmogleo." These users search for every corner of the alleys to share and promote their own favorite places through SNS. An analysis of hot places is limited if it is only based on macroeconomic indicators such as commercial area data published by national organizations, large-scale visiting facilities, and commuter figures. Careful analyses based on consumers' actual activities are needed. This study develops a "social big data analysis methodology" using Instagram data, which is one of the most popular SNSs suitable to identify recent consumer trends. We build a spatial analysis model using Local Moran's I. Results show that our model identifies new trend zones on the basis of posting data in Instagram, which are not included in the commercial information prepared by national organizations. The proposed analysis methodology enables better identification of the latest trend areas formulated by SNS user activities. It also provides practical information for start-ups, small business owners, and alley merchants for marketing purposes. This analytical methodology can be applied to future studies on social big data analysis.

• Journal of Venture Innovation
• /
• v.5 no.4
• /
• pp.1-21
• /
• 2022

Entrepreneurship has been emphasized in social and national importance. However, survival rate of domestic startups is relatively low. Therefore, it is urgent to come up with a plan to increase the survival rate by improving the satisfaction level of early start-ups. In this study, we investigated the effect of start-up motivation, start-up competence, and start-up support policies of early start-up companies on start-up satisfaction and the moderating effect of social support. Startup motivation were divided into economic motivation and self-actualization motivation in detail. Start-up competence was divided into experience competency and marketing competency in detail. The start-up support policy was divided into start-up fund support and start-up consulting support. An empirical analysis was conducted by receiving online and offline questionnaires from 250 managers of early start-up companies within 7 years of founding. As a result, economic motivation, self-actualization motivation, experience competency, marketing competency, and start-up fund support had a significant positive (+) effect on start-up satisfaction. However, start-up consulting support did not have a significant effect. In addition, the size of the influence on startup Satisfaction was in the order of self-actualization motivation, experience competency, marketing competency, startup fund support, and economic motivation. The moderating effect of social support was found in economic motivation, self-actualization motivation, and experience competency. However, the moderating effect of marketing competency, start-up fund support, and start-up consulting support was not tested. Through the research results, the academic implications that self-actualization motivation and experience competency are key factors in enhancing start-up satisfaction were suggested. In addition, practical implications were suggested that it is necessary to improve the effectiveness of entrepreneurship education programs and entrepreneurship consulting support systems that can maximize the self-realization and experience capabilities of early entrepreneurs.

• Journal of Oral Medicine and Pain
• /
• v.31 no.3
• /
• pp.211-221
• /
• 2006

Purpose The aims of this study were to evaluate micro-tensile bond strength of composite resin bonded to dentin following high-speed rotary handpiece preparation or Er:YAG laser preparation with two different adhesive systems and to assess the influence of different Er:YAG laser energies on the micro-tensile bond strength. Materials and Methods In this study, 40 third morlars were used. Flat dentin specimans were obtained and randomly assigned to eight groups. Dentin surfaces were prepared with one of four cutting types: carbide bur, Er:YAG laser (2 W, 3 W and 4 W) and conditioned with two bonding systems, Scotchbond Multipurpose Plus (SM), Clearfil SE bond (SE) and composite resin-build ups were created. After storage for 24 hours, each specimen was serially sectioned perpendicular to the bonded surface to produce more than thirty slabs in each group. Micro-tensile bond strength test was performed at a crosshead speed of 1.0 mm/min. Micro-tensile bond strengths (${\mu}TBS$) were expressed as means$\pm$SD. Data were submitted to statistical analysis using two-way ANOVA, one-way ANOVA, Student-Newman-Keuls' multiple comparison test and t-test. Results and Conclusion 1. Regardless of bonding systems, the ${\mu}TBS$ according to cutting types were from highest to lowest : 3 W, 2 W, Bur, and 4 W. In addition, there was no significant difference between Bur and 4 W (p<0.001). 2. Regardless of cutting types, SM showed significantly higher ${\mu}TBS$ than SE (p<0.001). 3. Bonding to dentin conditioned with SM resulted in higher ${\mu}TBS$ for 3 W compared to Bur, 2 W, and 4 W. There was no significant difference between 2 W and Bur (p<0.001). 4. Bonding to dentin conditioned with SE resulted in higher ${\mu}TBS$ for 3 W compared to 2 W, 4 W, and Bur. Bur exhibited significant lower ${\mu}TBS$ than all other cutting types. There were no significant differences between 3 W, 2 W and between 4 W and Bur (p<0.001). 5. The ${\mu}TBS$ of laser cutting groups were shown in order from highest to lowest: 3 W, 2 W and 4 W in two bonding systems. There was no significant difference between 2 W and 3 W in SE (p<0.001). : The ${\mu}TBS$ of composite resin bonded dentin was significantly affected by interaction between the cutting type and bonding system. In the range of 2 W-3 W, cavity preparation of the Er:YAG laser seems to supply good adhesion of composite resin restoration no less than bur preparation. In particular, if you want to use the self-etching system, including Clearfil SE bond for the purpose of a simplification of the bonding procedures and prevention of adverse effects by excessive etching, an Er:YAG laser may offer better adhesion than a bur.