• 대한본초학회지
• /
• 제36권6호
• /
• pp.27-37
• /
• 2021

Objectives : In the current study, we performed the 13-week repeated oral dose toxicity test and a 4-week recovery test of standardized Cornus officinalis Sieb. et Zucc. and Psoralea corylifolia L. 30 % ethanol extract (SCP) in Sprague-Dawley (SD) rats owing to aims for verifying no observed adverse effect level (NOAEL). Methods : The animal study was performed according to OECD guidelines for the testing of chemicals section 4 health effects test No.408 repeated dose 90-day oral toxicity study in rodents (03 October 2008). In the repeated dose toxicity study, SCP was orally administered to female and male rats at dose levels of 1,000, 2,000, and 4,000 mg/kg/day for 13-week. The control group and high dose (4,000 mg/kg/day) group were then monitored for 4 extra weeks to determine recovery time after the study period. 1) Results : Compared with the control group, there were no treatment-related adverse effects in clinical signs, body weight, hematology, serum biochemistry (Aspartate aminotransferase, Alanine aminotransferase, Alkaline phosphatase, 𝛾-Glutamyl transpeptidase, Blood urea nitrogen, Creatinine, Glucose, Total cholesterol, Total protein, Creatine phosphokinase, Albumin, Total bilirubin, Triglyceride, Inorganic phosphorus, Albumin/Globulin ratio, Calcium ion, Sodium ion, Potassium ion, Chloride ion), necropsy findings and organ weight (Ovary, Adrenal gland, Pituitary, Thymus, Prostate, Testis, Epididymis, Spleen, Kidney, Heart, Lung, Brain, Liver) at any dose tested. Conclusions : Taken together, these results suggest that the NOAEL of SCP in both genders was considered as over 4,000 mg/kg. Results from this study provide scientific evidence for the safety of SCP.

• 대한기계학회논문집A
• /
• 제20권3호
• /
• pp.775-787
• /
• 1996

An optimization procedure is proposed for the design of cylindrically laminated composite shell having midplane symmetry and subjected to axial force, torsion and internal pressure. Tsai-Wu and Tsai-Hill failure criteria are taken as objective functions. The stacking sequence represents the design variable. The optimal design formulation based on state space method is adopted and solution proccedure is described with the emphasis on the method of calculations of the design sensitivities. A gradient projection algorithm is employed for the optimization process. Numerical results are presented for the several test problems.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.237.2-237.2
• /
• 2016

A pure hafnium-carbide (HfC) coating layer was deposited onto carbon/carbon (C.C) composites using a vacuum plasma spray system. By adopting a SiC buffer layer, we successfully integrated C.C composites with a $100-{\mu}m-thick$ protective coating layer of HfC. Compared to the conventional chemical vapor deposition process, the HfC coating process by VPS showed increased growth rate, thickness, and hardness. The growth behavior and morphology of HfC coatings were investigated by FE-SEM, EDX, and XRD. From these results, it was shown that the addition of a SiC intermediate layer provided optimal surface conditions during the VPS procedure to enhance adhesion between C.C and HfC (without delamination). The thermal ablation test results shows that the HfC coating layer perfectly protected inner C.C layer from thermal ablation and oxidation. Consequently, we expect that this ultra-high temperature ceramic coating method, and the subsequent microstructure that it creates, can be widely applied to improve the thermal shock and oxidation resistance of materials under ultra-high temperature environments.

• 한국정밀공학회지
• /
• 제22권3호
• /
• pp.68-77
• /
• 2005

The set-up of an injection molding process is a ye complicated and time-consuming job because it is required to well determine a lot of variables closely related to products. Thus, the productivity of the set-up process mainly depends on operators' expertise and know-how. To solve the problem mentioned before, this research constructs a support system which helps operators determining the condition of the injection molding easily and systematically. The construction of the support system consists of the following four steps: 1) to determine the control variables which affect the target defect types, 2) to design and implement UI(user interface) using a scenario of set-up process, 3) to design and implement the search algorithms for the initial and optima] condition, and 4) to construct the embedded system which integrates the support system with the operating system of a plastic injection molding machine. The test experiments of some typical products are performed using the embedded system to verify the validity of the support system.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2002년도 제35회 춘계학술대회
• /
• pp.120-129
• /
• 2002

New method and device for the on-line measurement of soot concentration in a diesel engine oil are proposed, where the measurement principle is based mainly on attenuated internal total reflection. Various laboratory tests of the detector were performed mainly with carbon black particles of different contamination levels. It was found that the proposed detector could be well used to monitor oil deterioration due to soot contamination. Operational range of the detector was found from 0 to 5 mass percentage of soot content. Test results with water and fuel dilution showed that these effects were not remarkable. However, adsorption of carbon black particles to a measurement surface was considered to be a critical problem in the new detector. Effects of particle deposition onto the interface was experimentally evaluated with the oil temperature and turbulence and discussed throughout this work.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2005년도 제17회 워크샵 및 추계학술대회
• /
• pp.554-557
• /
• 2005

The bipolar plate is a major component of the PEM fuel cell stack, which takes a large portion of stack cost. In this study, as alternative materials for bipolar plate of PEM fuel cells, graphite composites were fabricated by compression molding. Graphite particles mixed with epoxy resin were used as the main substance to provide electric conductivity. To achieve desired electric properties, specimens made with different mixing ratio, processing pressure and temperature were tested. To increase mechanical strength, one or two layer of woven carbon fabric were added to the original graphite and resin composite. Thus, the composite material is consisted of the three phases: graphite particles, epoxy resin, and carbon fabric. By increasing mixing ratio, fabricated pressure and process temperature, electric conductivity was improved. The results of tensile test showed that the tensile strength of two-phase graphite composite was about 5MPa, and that of three-phase composite was increased to 54MPa.

• Restorative Dentistry and Endodontics
• /
• 제21권1호
• /
• pp.311-320
• /
• 1996

If root and resection is done during surgical endodontic treatment, newly exposed dentinal tubules form pathways between the canal and the peripheral tissue. Nd : YAG laser was used to block this phenomenon, and its effect was studied with dye penetration and SEM techniques. 40 intact single rooted teeth were divided into 4 groups(10 each) : control group and test groups, in which retrograde cavity surface, cutting surface, retrograde cavity surface & cutting surface were treated with laser(1 watt 15pps) and finally retrograde filling with IRM was conducted. After that, they were stained with 2 % methylene blue, sectioned and evaluated by the maximum infiltration depth. And to observe surface change, they were prepared for SEM. The results were as follows ; 1. All experimental groups showed microleakage with variation in amount. 2. The 2nd group which treated both the retrograde cavity and cutting surface showed significantly less microleakage than the other groups(p<0.05). There was no significant difference between groups treated on one side only. 3. As a result of SEM observation of dentin surface, obstruction of dentinal tubules with marble shaped granules, which were different from normal dentin could be seen. Cracks could be seen also. 4. In summary of this experiment, it is thought that effort to obstruct the exposed dentinal tubules as well as retrograde cavity after root end resection is needed.

• 전기학회논문지
• /
• 제65권1호
• /
• pp.158-164
• /
• 2016

That's the reason why LED lighting has to employ AC power inlet. However, LED is a kind of diode, semiconductor, it's driven by DC power. With whis reason all of LED lighting should have AC/DC converter in its systems. This converter causes energy loss, it's the target for lesson the energy loss. To reduce this energy loss, DC power distribution structure can be used. LED lighting system using LVDC is a kind of DC power distribution structure, but LVDC has severe voltage drop which makes non-uniform brightness in lighting system. In this paper, we suggest a novel structure for the uniform brightness in LVDC LED lighting system using IoT based network system. The constructed test-bed system of suggested structure shows this structure can con control the brightness with uniformity.

• 한국정밀공학회지
• /
• 제32권9호
• /
• pp.825-831
• /
• 2015

In this paper, capture motion and visual information from a virtual reality luge simulator to analyze muscular activity in the lower limbs. The Luge Simulator consists of a motion platform with a pneumatic module for weight distribution. We recruited luge athletes and healthy subjects and made real-time surface EMG measurements to estimate the muscular activity in the lower limbs according to the motion protocol of a simulator, and a test was conducted for each subject. The results indicated that the rectus femoris had the highest muscular activity according to the level of the slope and velocity of the luge. The soleus muscle showed a high level of activity during a turn in the luge according to the direction. We found that the development of a virtual reality sports simulator based on physical reaction results could bring positive effects to optimize reality and human cenesthesia.

• 열처리공학회지
• /
• 제13권6호
• /
• pp.398-404
• /
• 2000

The Ti-Al-V-N films have been deposited on various substrates by d.c and r.f reactive magnetron sputtering from a Ti-6Al-4V alloy target in mixed $Ar-N_2$ discharges. The films were investigated by means of XRD, AES, SEM/EDX, microhardness, TG and scratch test. The XRD and SEM results indicated that the films were of single B1 NaCl phase having dense columnar structure with the (111) preferred orientation. The composition of Ti-Al-V-N film was the Ti-7.1Al-4.3V-N(wt%) films. Adhesion and microhardness of Ti-Al-V-N films deposited by r.f magnetron sputtering method were better than those deposited by d.c magnetron sputtering method. The anti-oxidation properties of Ti-Al-V-N films were also superior to that of Ti-N film deposited by the same deposition conditions.