• Journal of the Korea Institute of Military Science and Technology
• /
• v.15 no.4
• /
• pp.424-434
• /
• 2012

This paper presents a path planning algorithm of the unmanned aerial vehicle for the neutralization of the enemy firepower. The long range firepower of the ememy is usually located at the rear side of the mountain which is difficult to bomb. The path planner not only consider the differential constraints of the Unmanned Aerial Vehicle (UAV) but also consider the final approaching angle constraint. This problem is easily solved by incorporating the analytical upper bounded continuous curvature path smoothing algorithm into the Rapidly Exploring Random Tree (RRT) planner. The proposed algorithm can build a feasible path satisfying the kinematic constraints of the UAV on the fly. In addition, the curvatures of the path are continuous over the whole path. Simulation results show that the proposed algorithm can generate a feasible path of the UAV for the bombing mission regardless of the posture of the tunnel.

• Journal of the Korea Safety Management & Science
• /
• v.13 no.2
• /
• pp.103-113
• /
• 2011

This research is to select a path planning algorithm to maximize survivability for Unmanned Aerial Vehicle(UAV). An UAV is a powered pilotless aircraft, which is controlled remotely or autonomously. UAVs are currently employed in many military missions(surveillance, reconnaissance, communication relay, targeting, strike etc.) and a number of civilian applications(communication service, broadcast service, traffic control support, monitoring, measurement etc.). In this research, a mathematical programming model is suggested by using MRPP(Most Reliable Path Problem) and verified by using ILOG CPLEX. A path planning algorithm for UAV is selected by comparing of SPP(Shortest Path Problem) algorithms which transfer MRPP into SPP.

• Journal of Institute of Control, Robotics and Systems
• /
• v.20 no.11
• /
• pp.1112-1117
• /
• 2014

Unmanned aerial vehicles (UAVs) are a popular research topic because of a great ripple effect in the future. However, current UAV technologies cannot be applied to manual aerial vehicles without any modification. As an alternative to current UAV technology, humanoid robots are adopted as pilots. If a humanoid robot controls an aerial vehicle autonomously, not only could manual aerial vehicles be utilized as UAVs, but the humanoid robot would also be put into an environment created for humans and conduct some missions suitable for humans. Humanoid robots are also able to handle tools and equipment designed for humans. In order to prove that a humanoid robot can pilot an airplane, an experiment is performed and the results of this experiment are shown in this paper.

• Journal of Mechanical Science and Technology
• /
• v.17 no.5
• /
• pp.654-667
• /
• 2003

This paper presents a consequence of the systematic approach to identify the aerodynamic parameters of an unmanned aerial vehicle (UAV) equipped with the automatic flight control system. A 3-2-1-1 excitation is applied for the longitudinal mode while a multi-step input is applied for lateral/directional excitation. Optimal time step for excitation is sought to provide the broad input bandwidth. A fully automated programmed flight test method provides high-quality flight data for system identification using the flight control computer with longitudinal and lateral/directional autopilots, which enable the separation of each motion during the flight test. The accuracy of the longitudinal system identification is improved by an additional use of the closed-loop flight test data. A constrained optimization scheme is applied to estimate the aerodynamic coefficients that best describe the time response of the vehicle. An appropriate weighting function is introduced to balance the flight modes. As a result, concurrent system models are obtained for a wide envelope of both longitudinal and lateral/directional flight maneuvers while maintaining the physical meanings of each parameter.

• Convergence Security Journal
• /
• v.19 no.4
• /
• pp.97-105
• /
• 2019

With the possibility of wireless control of the aircraft by Nicola Tesla, Unmanned Aerial Vehicle(UAV) was mainly used for military and defense purposes with the rapid development through World War I and II. As civilian applications of unmanned aerial vehicles have expanded, they have been used with various services, and attempts have been made to control various environmental changes and risk factors of unmanned aerial vehicles. However, GPS spoofing, Jamming attack and security accidents are occurring due to the communication in the unmaned aerial vehicle system or the security vulnerability of the unmanned aerial vehicle itself. In order to secure introduction of Unmanned aerial vehicle, South Korea has established Unmanned Aerial Vehicle verification system called Airworthiness Certification. However, the existing cerfication system is more focused on test flight, design and structure's safety and reliability. In this paper, we propose a unmanned aerial vehicle system model and propose security functional requirements on unmanned aerial vehicle system in the corresponding system model for secure-introduction of Unmanned Aerial Vehicle. We suggest the development direction of verification technology. From this proposal, future development directions of evaluation and verification technology of Unmanned Aerial Vehicle will be presented.

• International Journal of Aeronautical and Space Sciences
• /
• v.11 no.2
• /
• pp.98-109
• /
• 2010

This paper deals with a new method of unmanned aerial vehicle (UAV) recovery when a UAV fails to get a global positioning system (GPS) signal at an unprepared site. The proposed method is based on the simultaneous localization and mapping (SLAM) algorithm. It is a process by which a vehicle can build a map of an unknown environment and simultaneously use this map to determine its position. Extensive research on SLAM algorithms proves that the error in the map reaches a lower limit, which is a function of the error that existed when the first observation was made. For this reason, the proposed method can help an inertial navigation system to prevent its error of divergence with regard to the vehicle position. In other words, it is possible that a UAV can navigate with reasonable positional accuracy in an unknown environment without the aid of GPS. This is the main idea of the present paper. Especially, this paper focuses on path planning that maximizes the discussed ability of a SLAM algorithm. In this work, a SLAM algorithm based on extended Kalman filter is used. For simplicity's sake, a blimp-type of UAV model is discussed and three-dimensional pointed-shape landmarks are considered. Finally, the proposed method is evaluated by a number of simulations.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2009.11a
• /
• pp.557-560
• /
• 2009

The characteristics and present state of UAV engine which is operating currently were studied and advantages/disadvantages of UAV engines were also analyzed. Forecast of next generation UAV engine development trend was presented and the performance demand of gas turbine engine for UAV were suggested.

• Journal of Positioning, Navigation, and Timing
• /
• v.9 no.2
• /
• pp.131-138
• /
• 2020

In this paper, we analyze the delay phenomenon that can occur when controlling an unmanned aerial vehicle using a camera and describe a solution to solve the phenomenon. The group of pictures (GOP) value is changed in order to reduce the delay according to the frame data size that can occur in the moving image data transmission. The appropriate GOP values were determined through experimental data accumulation and validated through camera self-test, system integration laboratory (SIL) verification test and system integration test.

• Journal of Computing Science and Engineering
• /
• v.2 no.4
• /
• pp.357-374
• /
• 2008

Over the past few decades, a considerable number of studies have been conducted on the technologies to build an UAV (Unmanned Aerial Vehicle) control system. Today, focus in research has moved from a standalone control system towards a network-centric control system for multiple UAV systems. Enabling the design of such complex systems in easily understandable forms that are amenable to rigorous analysis is a highly desirable goal. In this paper, we discuss our experimental evaluation of the Time-triggered Message-triggered Object (TMO) structuring scheme in the design of the UAV control system. The TMO scheme enables high-level structuring together with design-time guaranteeing of accurate timings of various critical control actions with significantly smaller efforts than those required when using lower-level structuring schemes based on direct programming of threads, UDP invocations, etc. Our system was validated by use of environment simulator developed based on an open source flight simulator named FlightGear. The TMO-structured UAV control software running on a small computing platform was easily connected to a simulator of the surroundings of the control system, i.e., the rest of the UAV and the flight environment. Positive experiences in both the TMO-structured design and the validation are discussed along with potentials for future expansion in this paper.

• Journal of Advanced Navigation Technology
• /
• v.15 no.2
• /
• pp.234-240
• /
• 2011

In this paper, the performances of Cram$\acute{e}$r-Rao Lower Bound (CRLB) with Frequency Difference of Arrival (FDOA) measurements for Unmanned Aerial Vehicle (UAV) tracking are investigated. We focus on two cases: the influence on CRLB with FDOA measurements collected by time, and random distribution of Ground Stations (GSs). We derived the performance by gauging the size of CRLB through Complementary Cumulative Distribution Function (CCDF). From the simulation results, broader distribution of GSs and FDOA measurements by longer time bring about better performance.