• The Journal of Korean Academy of Prosthodontics
• /
• v.49 no.4
• /
• pp.300-307
• /
• 2011

Purpose: This study evaluated PostGraft$^{TM}$ which enhances implant stability and bone density. Materials and methods: Forty eight implants were installed at the tibia of ovariectomized rats. The group administrated with PostGraft$^{TM}$ was the experimental group, and the control group was not administrated. Implant stability was evaluated at the $2^{nd}$, $4^{th}$ and $6^{th}$ week by Periotest value, bone mineral density, bone-to-implant contact. These values were analyzed statistically with Mann-Whitney U test (P<.05). Histological analysis was evaluated at the $2^{nd}$, $4^{th}$ and $6^{th}$ week. Results: According to the Periotest$^{(R)}$ measurement, both experimental and control groups showed decrease in values as time elapsed. Greater decrease was observed in the experimental group but there was no significant difference. By examining the radiographic images, both experimental and control groups showed tendency of increase in bone density. Greater increase was seen in the experimental group but there was no significant difference. According to the bone-to-implant contact measurement, both experimental and control groups showed increase in values as time elapsed. Greater increase was seen in the experimental group. At the $2^{nd}$ and $4^{th}$ week, there was no significant difference. But at the $6^{th}$ week, there was significant difference (P<.05). By histological analysis, both experimental and control groups showed increase in bone formation as time elapsed. In addition, greater increase was seen in the experimental group. Conclusion: It could be concluded that the PostGraft$^{TM}$ medicated group showed better results in the bone density and osseointegration.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.27 no.2
• /
• pp.125-140
• /
• 2011

The remnant of temporary cement on the intaglio surface of cast restoration may have a negative effect on the retentive strength of permanent cement. This study was to evaluate the effect of temporary cement cleaning methods on the retentive strength of cementation type implant prostheses. Prefabricated implant abutments - height 5.5mm, diameter 4.5mm, 6 degree axial wall taper with chamfer margins were used. Forty copings-abutment specimens were divided into four groups(each n=10) according to the cleaning methods for temporary cement(Temp-$Bond^{(R)}$) as follows : no temporary cementation(the control group), orange solvent, ultrasonic cleaning, air borne-particle abrasion. After the application of temporary cement and the separation, the cleaning procedure was performed according to the protocol of each group. The specimens were cemented with $Premier^{(R)}$ Implant $Cement^{TM}$. After the permanent cementation, the specimens were subjected to thermocycling and pulled out from the specimens with a universal testing machine at a cross-head speed of 0.5mm/min. After the retentive strength test, all the specimens were cleaned using ultrasonic cleaning, abraded with air borne-particles, and steam-cleaned. Likewise, the specimens were temporarily cemented(Temp-$Bond^{(R)}$ NE), cleaned according to the protocol of each group, cemented with $Premier^{(R)}$ Implant $Cement^{TM}$ and subjected to thermocycling and measurement of their retentive strength. The mean of group with orange solvent were significantly lower than those of other groups(p<0.05). There was no significance between group with ultrasonic cleaning and group with air borne-particle abrasion. Group with ultrasonic cleaning and group with air-particle abrasion were no significance at control group. There was no significance between group cemented with Temp-$Bond^{(R)}$ and group cemented with Temp-$Bond^{(R)}$ NE. Within the limitation of this study, it can be concluded that the temporary cement cleaning method with only orange solvent may have a negative effect on the retentive strength of permanent cement. Ultrasonic cleaning and air borne-particle abrasion methods are recommended for the temporary cement cleaning method on cementation type implant prostheses.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.24 no.6
• /
• pp.1026-1038
• /
• 1995

Although aloe lost a lot of its previous popularity in modern clinical uses as medicine numerous scientific researches still have claimed the beneficial properties(curing and general tonic effect) of aloe gel. Whereas considerable contradictory reports have helped to confuse the aloe gel issue and continually aroused controversy about aloe gel efficacy. However health food, cosmetic and medicinal products made from aloe gel are widely available in the world market especially in U.S.A. so the growing of Aloe plant and the processing of A. vera gel have become big industries in some countries. In some previous papers the salicylic acid, one of the common trace gel components, was thought to have an analgetic and antinflammatory effect. Large amount of Mg ion in the gel was suggested to act as anesthetic, Mg-lactate as antihistamic, and Aloctin A(a glycoprotein) as wound healer by promoting the cell growth. The carboxypeptidase and bradykinase activity in the gel were proposed to have the pain relieving and antiinflammatory effect. But any of thes etheories concerining the physiological action of the trace gel components has not been demonstrated by modern pharmacology, and failed to be supported by clinical research. It was suggested by some research workers that trace amount of anthraquinone compounds in the gel play an important role to act as false substrate inhibitors for PG and TX production(antiprostanoid effect), by which, they believed, inflammation, burn and frostbite, and infected wound could be healed. This hypothesis has not been substantiated. Butthe suggested antimicrobial action, antidiabetic, and antidotic effect of aloe gel are likely to be attributed to the trace anthraquinone compounds. In a lot of recent experimental reports it has been claimed that aloe gel polysaccharides(acetylglucomannan, acetylmannan, and glycoprotein) have the antimicrobial, antinflammatory, antitumour, and infected wound healing effect by immunoenhancement. It is hoped that these effects will be soon documented in clinical studies, then the controversy on aloe gel beneficial effect will cease. In the 30 days subchronic toxicity test the lowest observed adverse effect level of acemannan(acetylmannan) on dog was 5.0 mg/kg, IP. But the aloe gel is generally agreed to be harmless and non toxic even for the internal use such as health food. In the case of idiosynrasy one must keep the delayed type hypersensitivity reaction of aloe gel in mind. In conclusion it seem to be impossible to simply refuse a lot of evidences made by research workers who have claimed aloe gel's beneficial effects and to deny the fact that there had been long therapeutic histories of Aloe plants.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.31 no.6 s.165
• /
• pp.848-858
• /
• 2007

Sontag and Lee (2004) recently developed an objectively measurable instrument, the Proximity of Clothing to Self(PCS) Scale, which measured the psychological closeness of clothing to self. They validated a 4-factor, 24-item PCS Scale for use with adolescents and identified the need for confirmation of the factor structure with other age groups. This paper extends the work of Sontag and Lee by employing the PCS Scale with older persons, age 65 and over, and reports the validation of a 3-factor, 19-item PCS Scale for older persons. A mail survey was sent to a national random sample of 1,700 older Persons by means of a list purchased from a U.S. survey sampling company in late November 2004. Total usuable number of respondents was 250 with an adjusted response rate of 15.6 percent. Three analytical rounds of confirmatory factor analysis(CFA) to test the construct validity of the PCS Scale were conducted by using AMOS 5.0(Analysis of Moment Structures), one of several structural equation modeling(SEM) programs. Completion of three rounds of the CFA resulted in a 3-factor, 19-item PCS Scale with demonstrated construct validity and reliability for older persons. The three PCS dimensions are clothing in relation to 1) self as structure-process(PCS Dimension 1-2-3 combined), 2) self-esteem-evaluative and affective processes(PCS Dimension 4-5 combined), and 3) body image and body cathexis(PCS Dimension 6). The initially hypothesized 6-factor scale(Sontag & Lee, 2004) was not confirmed for adolescents in their study nor with older persons in this study. In addition, the 4-factor solution for the adolescent group did not hold for older persons. It appears that the self-system of older persons is more integrated than may be true for younger individuals. Recommendations for future testing of construct validity of the PCS Scale are made.

• Journal of Intelligence and Information Systems
• /
• v.25 no.4
• /
• pp.53-65
• /
• 2019

Object tracking is one of important steps to achieve video-based surveillance systems. Object tracking is considered as an essential task similar to object detection and recognition. In order to perform object tracking, various machine learning methods (e.g., least-squares, perceptron and support vector machine) can be applied for different designs of tracking systems. In general, generative methods (e.g., principal component analysis) were utilized due to its simplicity and effectiveness. However, the generative methods were only focused on modeling the target object. Due to this limitation, discriminative methods (e.g., binary classification) were adopted to distinguish the target object and the background. Among the machine learning methods for binary classification, total error rate minimization can be used as one of successful machine learning methods for binary classification. The total error rate minimization can achieve a global minimum due to a quadratic approximation to a step function while other methods (e.g., support vector machine) seek local minima using nonlinear functions (e.g., hinge loss function). Due to this quadratic approximation, the total error rate minimization could obtain appropriate properties in solving optimization problems for binary classification. However, this total error rate minimization was based on a batch mode setting. The batch mode setting can be limited to several applications under offline learning. Due to limited computing resources, offline learning could not handle large scale data sets. Compared to offline learning, online learning can update its solution without storing all training samples in learning process. Due to increment of large scale data sets, online learning becomes one of essential properties for various applications. Since object tracking needs to handle data samples in real time, online learning based total error rate minimization methods are necessary to efficiently address object tracking problems. Due to the need of the online learning, an online learning based total error rate minimization method was developed. However, an approximately reweighted technique was developed. Although the approximation technique is utilized, this online version of the total error rate minimization could achieve good performances in biometric applications. However, this method is assumed that the total error rate minimization can be asymptotically achieved when only the number of training samples is infinite. Although there is the assumption to achieve the total error rate minimization, the approximation issue can continuously accumulate learning errors according to increment of training samples. Due to this reason, the approximated online learning solution can then lead a wrong solution. The wrong solution can make significant errors when it is applied to surveillance systems. In this paper, we propose an exactly reweighted technique to recursively update the solution of the total error rate minimization in online learning manner. Compared to the approximately reweighted online total error rate minimization, an exactly reweighted online total error rate minimization is achieved. The proposed exact online learning method based on the total error rate minimization is then applied to object tracking problems. In our object tracking system, particle filtering is adopted. In particle filtering, our observation model is consisted of both generative and discriminative methods to leverage the advantages between generative and discriminative properties. In our experiments, our proposed object tracking system achieves promising performances on 8 public video sequences over competing object tracking systems. The paired t-test is also reported to evaluate its quality of the results. Our proposed online learning method can be extended under the deep learning architecture which can cover the shallow and deep networks. Moreover, online learning methods, that need the exact reweighting process, can use our proposed reweighting technique. In addition to object tracking, the proposed online learning method can be easily applied to object detection and recognition. Therefore, our proposed methods can contribute to online learning community and object tracking, detection and recognition communities.

• The Journal of Korean Medicine Ophthalmology and Otolaryngology and Dermatology
• /
• v.18 no.3
• /
• pp.84-94
• /
• 2005

Objective: In order to help clinical approach on OME patient in progress observation and decision on improvement by clinical research results using tympanometry. Methods: Data was collected from 163 ears of 96 patients who were treated in Dept. of Oriental Medical Ophthalmology & Otolaryngology & Dermatology, Kyung-Hee Medical Center from 2001-2-12 to 2005-4-29 for Otitis Media with Effusion(OME). Tympanometry was applied to all patients and the test result was used to evaluate progress and improvement. F/U cases below 3 times were excluded. Results & conclusion: 1. Age and sex distribution was as follows: Mean Age 5.5years old(Standard deviation: 2.1), age distribution 2-61years old, below 10years old 151cases(92.6%) and above 10years old 12cases(7.4%). Male and female ratio was 1.81:1. 2. There were 67people(69.8%) with bilateral affected ear. Unilateral was 29people(30.2%). Affected ear distribution according to sex came out similarly. 3. Affected period distribution was as follows: over 12weeks 71cases(43.6%), under 12weeks 92cases(56.4%). Out of under 12weeks cases, 2-4weeks was 34cases(20.9%), 0-1weeks and 5-8weeks 20cases(12.3%), 9-12weeks 18cases(11.0%). There was evident difference about affected period between male and female. 4. All patients who served previous Tx in medical clinic(118 cases) took antibiotics. Only 6cases took tube insertion. The period of Taking antibiotics was as fellows: over 6weeks 42cases(35.6%), under 5weeks 37cases(31.4%). unknown 25cases(21.2%), jntermittent 14cases(11.9%). 5. In Period of Tx distribution, 5-6weeks showed 40cases(24.5%) which was highest number. In Improved cases(85cases), 3-4weeks and 5-6weeks each 22cases(25.9%) which was highest number. 1-2weeks 3cases(3.5%), 7-8weeks 12cases(14.1%), 9-10weeks 9cases(10.6%), 11-12weeks 10cases(11.8%), over 12weeks 7cases(8.2%). 6. The cases which have gastrointestinal Sx were 71cases(43.6%), the others 92cases(56.4%). Details of gastrointestinal Sx were as follows: Sx associated with appetite 47cases(47.5%), constipation 15cases(15.2%), abdominal pain and diarrhea 14cases(14.1%), frequent vomitting Teases(7.1%), etc 4cases(4.0%). 7. The cases which have accompanying disease were 116case(71.2%), the other 47cases(28.8%). Details a accompanying disease were as follows: sinusitis 57cases(35%), rhinitis 55cases(3.7%), allergic rhinitis 20cases(12.3%), atopic dermatitis 19cases(1.7%), urticaria 4cases(2.5%), asthma 3cases(1.8%), nasal polyp and conjunctivitis 2cases(1.2%) each, laryngitis 1case(0.6%).

• Radiation Oncology Journal
• /
• v.24 no.1
• /
• pp.30-36
• /
• 2006

Purpose: It is well known from clinical experience that acute complications of chemoradiation therapy vary from patients to patients. However, there are no known factors to predict these acute complications before treatment starts. The human XRCC1 gene is known as a DNA base excision repair gene. We investigated the possibilities of XRCC1 gene polymorphisms as a predictor for the acute complications of chemoradiation therapy in colorectal cancer patients. Materials and Methods: From July 1997 to June 2003, 86 colorectal cancer patients (71 rectal cancer, 13 sigmoid colon cancer and 2 colon cancer patients) were treated with chemoradiation therapy at the Department of Radiation Oncology, Inha University Hospital. Twenty-two patients were in stage B, 50 were in stage C, 8 were in stage D and 6 patients were unresectable cases. External radiation therapy was delivered with 10MV X-ray at a 1.8 Gy fraction per day for a total dose of radiation of $30.6{\sim}59.4 Gy$ (median: 54 Gy). All the patients received 5-FU based chemotherapy regimen. We analyzed the acute complications of upper and lower gastrointestinal tract based on the RTOG complication scale. The initial and lowest WBC and platelet count were recorded during both the RT period and the whole treatment period. Allelic variants of the XRCC1 gene at codons 194, 280 and 399 were analyzed in the lymphocyte DNA by performing PCR-RFLP. Statistical analyses were carried out with the SAS (version 6.12) statistical package. Results: When all the variables were assessed on the multivariate analysis, recurrent disease revealed the factors that significantly correlated with upper gastrointestinal acute complications. Arg399Gln polymorph isms of the XRCC1 gene, the radiation dose and the frequencies of chemotherapy during radiation therapy were significantly correlated with lower gastrointestinal complications. Arg399Gln polymorph isms also affected the decrease of the WBC and platelet count during radiation therapy. Conclusion: Although the present sample size was too small for fully evaluating this hypothesis, this study suggests that Arg399Gln polymorph isms of the XRCC1 genes may be used as one of the predictors for acute complications of chemoradiation therapy in colorectal cancer patients.

• Journal of Life Science
• /
• v.29 no.6
• /
• pp.653-661
• /
• 2019

The first small interfering RNA (siRNA) therapeutics have recently been approved by the Food and Drug Administration in the U.S., and the demand for a new RNA therapeutics bioanalysis method-which is essential for pharmacokinetics, including the absorption, distribution, metabolism, and excretion of siRNA therapeutics-is rapidly increasing. The stem-loop real-time qPCR (RT-qPCR) assay is a useful molecular technique for the identification and quantification of small RNA (e.g., micro RNA and siRNA) and can be applied for the bioanalysis of siRNA therapeutics. When the anti-HPV E6/E7 siRNA therapeutic was used in preclinical trials, the established stem-loop RT-qPCR assay was validated. The limit of detection was sensitive up to 10 fM and the lower limit of quantification up to 100 fM. In fact, the reliability of the established test method was further validated in three intra assays. Here, the correlation coefficient of $R^2$>0.99, the slope of -3.10 ~ -3.40, and the recovery rate within ${\pm}20%$ of the siRNA standard curve confirm its excellent robustness. Finally, the circulation profiles of siRNAs were demonstrated in rat serum, and the pharmacokinetic properties of the anti-HPV E6/E7 siRNA therapeutic were characterized using a stem-loop RT-qPCR assay. Therefore, the stemloop RT-qPCR assay enables accurate, precise, and sensitive siRNA duplex quantification and is suitable for the quantification of small RNA therapeutics using small volumes of biological samples.

• Journal of Korean Dental Hygiene Science
• /
• v.6 no.1
• /
• pp.37-50
• /
• 2023

Background: This study investigated the structural relationships among justice, test anxiety, and school reliability s non-face-to-face tests of dental hygiene students. Methods: A survey was conducted with 267 dental hygiene students. The survey items included general characteristics, opinions on evaluation, the fairness of non-face-to-face tests (distributive, procedural, and interactional justice), school satisfaction, and school reliability. For statistical analysis, independent-sample t-tests, one-way ANOVA, and structural modeling analyses were performed. Results: Among factors that directly affected distributive justice and reliability towards non-face-to-face tests, the higher the interactional justice (β=0.401, p<0.001) and distributive justice (β=0.232, p=0.002) levels, the higher the school satisfaction. The higher the school satisfaction (β=0.606, p<0.001) and procedural justice (β=0.299, p<0.001) levels, the higher the perceived reliability of the school. Factors that indirectly affected school reliability included interactional justice (β=0.243, p=0.010) and distributive justice (β=0.141, p=0.010). Interactional justice (β=0.592, p=0.010) and distributive justice (β=0.208, p=0.010) were the factors affecting school satisfaction. Moreover, factors that influenced school reliability were distributive justice (β=0.56, p=0.010), interactional justice (β=0.332, p=0.010), procedural justice (β=0.229, p=0.010), and distributive justice (β=0.116, p=0.010). Conclusions: Students will trust and be satisfied with schools when schools and professors sufficiently provide information on face-to-face tests and ensure proper procedures to achieve reasonable grades as rewards for exerted time and effort. Furthermore, this study provides a reference base for developing a variety of content for fair, non-face-to-face tests, thereby allowing students to trust their schools.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.4 no.1
• /
• pp.128-137
• /
• 2002

This study was conducted to develop the heat exchanger by utilizing the heat energy of underground water(15℃), which might be used for cooling and heating system of the agricultural facilities. We developed the heat exchanger by using the parallel type plat fin tube made of Aluminum(Al 6063), which was named Aloo-Heat(No. 0247164, offered by Korean Intellectual property Office). The trial manufactures were made from Aloo-heat which was 600mm, 700mm length respectively, and It were welded to the end "U" type in order to direct flow of the underground water. The performance test was carried out under the condition of open space and room temperature with the change of flow rate of the underground water and air. The results are as follows. 1. The trial manufactures had convection heat value from 33 to 156 W/m²℃, and It was coincided with design assumption. 2. The amount of energy transfer was increased with the increment of the area of heat transfer, the air flow, the gap of temperature inlet & outlet the underground water and the air. 3. The heat value was 6,825W when the air flow was 6,000m³/h and the gap of temperature between inlet and outlet of the underground water was 6℃, and It dropped from 25.8℃ to 23.2℃(-2.6℃ difference). The convection heat value was 88.5W/m²℃. 4. The heat value was 2.625W when the air flow was 4,000m³/h and the gap of temperature between inlet and outlet the underground water was 2℃, and It dropped from 27℃ to 22.5℃(-4.5℃ difference). The convection heat value was 33.6W/m²℃. 5. Correlation values(R²) of the testing heat values of the trial manufacture type I, II, and III were 0.9141, 0.8935, and 0.9323 respectively, and correlation values(R²) of the amount of the air flow 6,000m³/h, 5,000m³/h, 4,000m³/h were 0.9513, 0.9414, and 0.9003 respectively.