• Journal of the Korea institute for structural maintenance and inspection
• /
• v.9 no.3
• /
• pp.203-212
• /
• 2005

Cellulose insulation is primarily manufactured from recycled newsprint and treated with fire retardants for the fire resistance. Thanks to the fire retardants, it is not combustible and flammable. In addition to that, Its thermal resistance is much better than that of fiberglass or rock wool. It is made from waste paper and easily decayed when it is demolished, and it has small embodied energy. So it is very environment-friendly building material. For broader use of cellulose insulation in buildings in Korea, it is necessary to test its physical performance to compare the results with the requirements on the Korean Building Code. To this end, apparent thermal conductivity (ka) measurements of Korean-made loose-fill cellulose insulations were recently completed using equipment that was built and operated in accordance with ASTM C 518 and the fire resistance was tested in accordance with ASTM C 1485. Korean loose-fill cellulose has thermal conductivity about 5% greater than the corresponding U.S. product at the same density. This is likely due to differences in the recycled material being used. Both spray-applied and loose-fill cellulose insulation lose about 1.5% of their thermal resistivity for $5.5^{\circ}C$ increase in temperature. The fire resistance of cellulose insulation is increased in linear proportion to the increase of the rate of fire retardant. Thanks to the high fire resistance, cellulose insulation can be used as a substitution of Styrofoam or Urethane foam which is combustible. The thermal conductivity of cellulose insulation was $0.037-0.043W/m{\cdot}K$ at the mean specimen temperature from $4-43^{\circ}C$. It corresponds to the thermal resistance of "Na Grade" according to the Korean Building Code. The effect of chemical content on thermal conductivity was negligible for all but the chemical-free specimen which had the highest value for the thermal conductivity over the temperature range tested. The thermal resistance of cellulose insulation is better than that of fiberglass or rock wool, and its fire resistance is higher than that of Styrofoam or Urethane foam. Therefore it can be substituted for those above considering its physical performance. Cellulose insulation is no more expensive than Styrofoam or rock wool, so it is recommended to use it more widely in Korea.

• The KIPS Transactions:PartD
• /
• v.10D no.6
• /
• pp.885-896
• /
• 2003

The typws of service using location Information are being various and extending their domain as wireless internet tochnology is developing and its application par is widespread, so it is prospected that LBS(Location-Based Services) will be killer application in wireless internet services. This location information is basic and high value-added information, and this information services make prior GIS(Geographic Information System) to be useful to anybody. The acquisition of this location information from moving object is very important part in LBS. Also the interfacing of acquisition of moving object between MODB and telecommunication network is being very important function in LBS. After this, when LBS are familiar to everybody, we can predict that LBS system load is so heavy for the acquisition of so many subscribers and vehicles. That is to say, LBS platform performance is fallen off because of overhead increment of acquiring moving object between MODB and wireless telecommunication network. So, to make stable of LBS platform, in this MODB system, acquisition of moving object location par as reducing the number of acquisition of unneccessary moving object location. We study problems in acquiring a huge number of moving objects location and design some acquisition model using past moving patternof each object to reduce telecommunication overhead. And after implementation these models, we estimate performance of each model.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.36 no.8
• /
• pp.1055-1061
• /
• 2007

Caesalpinia sappan L. is an indeciduous tree distributed in China, India, Miyanmar and Vietnam. Its heartwood has long been used in oriental folk medicines to treat diseases. In this study, antioxidative activities of Caesalpinia sappan L. and the effect of gamma irradiation on its chemical and biological properties were investigated. The ethyl acetate fraction (EtOAc fr.) of Caesalpinia sappan L. was irradiated with 100 kGy of gamma ray. The dark red color of EtOAc fr. was significantly (p<0.05) removed by irradiation (Hunter L and b values increased and a value decreased). The total phenolic content of EtOAc fr. was 865 mg/g and it was increased to 1195 mg/g by gamma irradiation. DPPH radical and superoxide anion radical scavenging activities and lipid peroxidation inhibitory activity of EtOAc fr. were very high and its activities were also increased by gamma irradiation. EtOAc fr. also inhibited the irradiation-induced DNA damage of lymphocyte as determined by comet assay. In conclusion, EtOAc fr. of Caesalpinia sappan L. extract showed high antioxidative activities in vitro. Furthermore, gamma irradiation on EtOAc fr. ameliorated the color and antioxidative properties. Therefore, it can be suggested that Caesalpinia sappan L. may be a good material for antioxidant function and gamma irradiation may be applied for the improvement of chemical and biological properties of Caesalpinia sappan L.

• Korean journal of applied entomology
• /
• v.30 no.1
• /
• pp.18-28
• /
• 1991

The optimal pH of the extraction buffer was 7.5 considiering AChE stability and its buffer capacity when AChE was isolated and extracted from the housefly(Musca domesitca L.)and three other insect species with 0.01 M sodium phosphate buffer. Also, the optimal pH of the reaction buffer was 7.5 considering enzyme activity and its buffer capacity when AChE activity was measured with the substrate in 0.1 M sodium phosphate buffer. The Potter Elvehjem type homogenizer with Teflon pestle was used to homgenize the tissues. When preparing a AChE suspension by centrifuging the homogenate, 700 g supernatant of adult head for the housefly, 700 g supernatnat of 5th instar nymphal whole body for the brown planthopper, lipid-eliminated 10,000 g supernatant of 5th instar larval whole body for the diamondback moth, and 700 g supernatant of 4th instar larval head for the tobacco cutworm were considered satisfactory as enzyme sources in view of mass preparation, extraction efficiency and stability of enzyme activity during evaluation. When AChE suspensions of 4 insect species were stored at $-18^{\circ}C$, more than 90% of activity was maintained up to 3 weeks. Km values of AChEs of the housefly, the brown planthopper, and the diamondback moth were 0.042, 0.037 and 0.043 mM, respectively and AChE-specific substrate inhibition was observed at high concentration. Km value of the tobacco cutworm ChE was 1.15 mM and BuChE characteristics was observed, though further study is needed. The optimal substrate concentration for the AChE inhibition tests was 0.5 mM for the housfly, the brown planthopper, and the diamondback moth and 12 mM for the tobacco cutworm.

• Korean journal of applied entomology
• /
• v.47 no.2
• /
• pp.155-162
• /
• 2008

The Welsh onion beet armyworm, Spodoptera exigua (Hubner), has attacked Welsh onion and is now the most important pest of Welsh onion in southwestern Korea. The beet armyworm has a wide host range, occurring as a serious pest of vegetable and fields. The relatively high abundance of beet armyworm has stimulated frequent application of insecticides to foliage. Insecticide resistance is a major problem in management of this insect. Accordingly, pesticide application for the control of beet armyworm was tried in both the open field and in laboratory, using 4 synthetic compounds such as metaflumizone and chlorfenapyr, indoxacarb, flufenoxuron, emamectin benzoate. In the laboratory, each developmental stages from eggs, larva to pupa was tested against 4 insecticides. Against the eggs of welsh onion beet armyworm, there was no significantly different with each other. These tested chemicals no killing effect to eggs. However, the population of 1st larva hatched from eggs were reduced because they eaten the egg shell with residual insecticides. The tested insecticides were taken very high mortalities to 1st to 3rd larva of Welsh onion beet armyworm. Otherwise, there were decreased the death rate from 4th to 6th larva. On the other hand, their value of control effects were relatively good against Welsh onion beet armyworms in the field between 87.2 and 90.5% on 10 days after insecticide application.

• Korean Journal of Environment and Ecology
• /
• v.26 no.4
• /
• pp.512-527
• /
• 2012

Jangdo Island (area $1.54km^2$) located in the western end of Dadohae Haesang National Park has been recognized as an prominent ecoregion possessing high moor and national biodiversity hotspot. In terms of the Z$\ddot{u}$rich-Montpellier School's phytosociology, we investigate the diversity of plant communities on the island and reevaluate the Jangdo wetland designated as Ramsar site. Ten physiognomic types of the Jangdo's vegetation were classified into 22 syntaxa (3 associations, 15 communities and 4 subcommunities). Jangdo wetland was actually denominated as 'eutrophic wetland' by Pharagmitetea and Orizetea rather than 'high moor'. Nevertheless, existence value of the Jangdo wetland is evaluated very high as a stepping stone for migratory birds and even plant dispersions. A new site of the northernmost distribution of Arachniodo-Castanopsietum sieboldii, which is a kind of cold-resistant phytocoenosis among the Camellietea japonicae of the warm-temperate broad-leaved forests, was described. Hosta yingeri-Carpinus turczaninovii var. coreana community and Carex wahuensis var. robusta-Juniperus chinensis var. procumbens community were described specifically as an endemic and an edaphic vegetation type, respectively. The unique Jangdo's vegetation reflects regional environmental conditions such as much higher frequency of frost-free days and the highest number of annual average foggy days in Korea and a well-developed aquifer in the depressed basin formed by differential erosion. We identified that human interventions (pasture, logging, forest fire, cultivation, etc.) has been involved intensively on every vegetation types, even though a rugged and inaccessible topography of the island. Particularly the Jangdo wetland has been recently threatened by fundamental distortion on hydrological system. We request an immediate establishment of the conservation prescription manual.

• The Journal of Korean Academy of Prosthodontics
• /
• v.41 no.6
• /
• pp.720-731
• /
• 2003

Statement of problem. The importance of fixture design and surface treatment. Purpose. The clinical success of dental in plants is affected by many factors such like as degree of osseointegration, the effective load dispersion for the prostheses, and a lot of attempts have been made to overcome the difficulties. In this study, efforts were made to find the possibility of clinical acceptance of the dental implants of newly designed surface and resorbable blast media surcace. Materials and methods. In this study, two groups of custom-made, screw-shaped implants were prepared. The first with the consisting of Branemark clone design and the other with the new design. These implants were divided into four groups according to the kinds of surface treatment. Four implants($AVANA^{(R)}$, Osstem, Busan, Korea)of each group were installed in twenty rabbits. Group A was consisted of Branemark done implant left as machined, Group B with Branemark clone implants with RBM(Resorbable blast media) surface, Group C with newly designed implants left as machined and Group D with newly designed implants with RBM surface. One of the twenty rabbits died from inflammation and the observation was made for six weeks. Specimens from four groups were observed using scanning electron microscopy with 40, 100, 1000 magnification power and microsurface structures were measured by white-light scanning interferometry for three dimensional surface roughness measurements(Accura $2000^{(R)}$, Intek-Plus, Korea.). Removal torque was measured in 17 rabbits using digital torque gauge(MGT 12R, Mark-10 corp., NY, U.S.A.) immediately after the sacrifice and two rabbits were used for the histologic preparation(EXAKT $310^{(R)}$, Heraeus Kulzer, wehrheim, Germany) of specimens and observed under light microscope. Resonance frequency measurement($Osstell^{(R)}$) was taken with the 19 rabbits at the beginning of the implant fixation and immediately after the sacrifice. Results. Following results were taken from the experiment. 1. The surface of the RBM implants as seen with SEM had rough and irregular pattern with reticular formation compared to that of fumed specimens showing different surface topographies. 2. The newly designed implant with RBM surface had high removal torque value among four groups with no statistical significance. The average removal torque was $49.95{\pm}6.70Ncm$ in Group A, $51.15{\pm}4.40Ncm$ in Group B, $50.78{\pm}9.37Ncm$ in Group C, $51.09{\pm}4.69Ncm$ in Group D. 3. The RFA values were $70.8{\pm}4.3Hz$ in Group A, $71.8{\pm}3.1Hz$ in Group B, $70.9{\pm}2.5Hz$, $72.7{\pm}2.5Hz$ in Group D. Higher values were noted in the groups which had surface treatment compared to the untreated groups with no statistical significance. 4. The results from the histomorphometric evaluation showed a mean percentage of bone-to-implant contact of $45{\pm}0.5%$ in Group A, $55{\pm}3%$ in Group B, $49.5{\pm}0.5%$ in Group C, and $55{\pm}3%$ in Group D. Quite amount of newly formed bone were observed at the surface RBM-treated implants in bone marrow space.

• Food Science and Preservation
• /
• v.24 no.6
• /
• pp.727-733
• /
• 2017

We investigated the effect of PE film thickness on the modified atmosphere packaging (MAP) deastringency of 'Sanggamdungsi' (Diospyros kaki cv.) astringent persimmon at room temperature ($25^{\circ}C$) and low temperature ($-1^{\circ}C$). The fruits were individually packaged with PE film of which the thickness is 60, 80, 100, 115 or $130{\mu}m$ and stored at room or low ($-1^{\circ}C$) temperature. At room temperature, firmness shows the highest value (23.3-26.5) at $100{\mu}m$ thickness. Top flesh browning and decay was monitored at 20 days after storage, and peel blackening and style-end softening was negligible at optimal thickness. Therefore, optimal film thickness of deastringency at room temperature is $80-100{\mu}m$. At this thickness, the astringency was removed after 5 days and the fruits can be distributed until 10 days after the MAP. At low ($-1^{\circ}C$) temperature, firmness was maintained regardless of film thickness. However, the firmness is higher as the film is thicker. Top flesh browning and decay was not occurred even after 90 days after storage. Peel blackening and style-end softening was monitored at 90 days after storage. Off-flavor was monitored at 115 and $130{\mu}m$ thickness. Therefore, optimal film thickness of deastringency at low ($-1^{\circ}C$) temperature is $80-100{\mu}m$. At this thickness, the astringency was removed after 50 days and the fruits can be distributed until 80 days after the MAP.

• The Korean Journal of Financial Management
• /
• v.21 no.2
• /
• pp.27-63
• /
• 2004

Since the 1980s, many multinational corporations have been issuing stocks on foreign stock exchanges, not only to enhance their investor base and liquidity, but also to diversify risks. The phenomenon has also been intensified by the rapid financial globalization and securitization trends. The main purpose of this study is to look into the long-run performance of MNCs' cross-listings of stocks on foreign stock exchanges. We use the event study and cross-sectional regression methods. We obtained some interesting empirical results about the long-run effect of cross-listings. First before the listing data the effect of cross-listing is to increase the underlying stock Vice in the local market. It may be caused by expectation of lower risk and cost of capital. However, after the listing data the stock price has been declining, even if it is not significant. Second, we examine the difference in the long-run cross-listing effect, which may be caused by the listing direction. When listing is made from a less developed market to a more developed market, the effect is better than that in the reverse direction. Furthermore, the effect is worse, when the listing company's home country is the U.S. Third, there is a negative relation between CARs and underlying stock liquidity in the local market, So it implies that a firm, whose underlying stocks are very liquid in the local market should carefully value cross-listing based upon the cost and benefit analysis. Last, but not the least we find that the long-un cross-listing effect is better, when a listing firm's ROE is higher.

• Journal of Intelligence and Information Systems
• /
• v.16 no.2
• /
• pp.55-72
• /
• 2010

Recently, the battlefield environment has changed from platform-centric warfare(PCW) which focuses on maneuvering forces into network-centric warfare(NCW) which is based on the connectivity of each asset through the warfare information system as information technology increases. In particular, C4I(Command, Control, Communication, Computer and Intelligence) system can be an important factor in achieving NCW. It is generally used to provide direction across distributed forces and status feedback from thoseforces. It can provide the important information, more quickly and in the correct format to the friendly units. And it can achieve the information superiority through SA(Situational Awareness). Most of the advanced countries have been developed and already applied these systems in military operations. Therefore, ROK forces also have been developing C4I systems such as KJCCS(Korea Joint Command Control System). And, ours are increasing the budgets in the establishment of warfare information systems. However, it is difficult to evaluate the C4I effectiveness properly by deficiency of methods. We need to develop a new combat effectiveness evaluation method that is suitable for NCW. Existing evaluation methods lay disproportionate emphasis on technical factors with leaving something to be desired in human factors. Therefore, it is necessary to consider technical and human factors to evaluate combat effectiveness. In this study, we proposed a new Combat Effectiveness evaluation algorithm called E-TechMan(A Combat Effectiveness Evaluation Algorithm Considering Technical and Human Factors in C4I System). This algorithm uses the rule of Newton's second law($F=(m{\Delta}{\upsilon})/{\Delta}t{\Rightarrow}\frac{V{\upsilon}I}{T}{\times}C$). Five factors considered in combat effectiveness evaluation are network power(M), movement velocity(v), information accuracy(I), command and control time(T) and collaboration level(C). Previous researches did not consider the value of the node and arc in evaluating the network power after the C4I system has been established. In addition, collaboration level which could be a major factor in combat effectiveness was not considered. E-TechMan algorithm is applied to JFOS-K(Joint Fire Operating System-Korea) system that can connect KJCCS of Korea armed forces with JADOCS(Joint Automated Deep Operations Coordination System) of U.S. armed forces and achieve sensor to shooter system in real time in JCS(Joint Chiefs of Staff) level. We compared the result of evaluation of Combat Effectiveness by E-TechMan with those by other algorithms(e.g., C2 Theory, Newton's second Law). We can evaluate combat effectiveness more effectively and substantially by E-TechMan algorithm. This study is meaningful because we improved the description level of reality in calculation of combat effectiveness in C4I system. Part 2 will describe the changes of war paradigm and the previous combat effectiveness evaluation methods such as C2 theory while Part 3 will explain E-TechMan algorithm specifically. Part 4 will present the application to JFOS-K and analyze the result with other algorithms. Part 5 is the conclusions provided in the final part.