• Journal of the Korea Safety Management & Science
• /
• v.16 no.4
• /
• pp.391-396
• /
• 2014

For the purpose of finding out the acoustical characteristics of exterior materials in bridge, analytical studies are performed with boundary elements method by using the commercial program SYSNOISE. Before analysis, to figure out material property, it was conducted experiments of absorption coefficient for absorptive material. And prediction of pressure were conducted I GIRDER type (before & after installation of absorption panel ) and BOX GIRDER type (before & after installation of absorption panel) The results show that when the absorption panel is installed, environment around bridge can help reduce traffic noise. It was proved to be the effective noise reduction counter-plan for a traffic noise in the bridges.

• Proceedings of the KIEE Conference
• /
• 1998.11a
• /
• pp.82-84
• /
• 1998

LDM(Linear DC Motor) are used in high speed, high-precision position control system. Because of these advatages, LDM has already used in the motor of pen-recorder, magnetic-disk devices. Under the limited dimension, we propose the design method of LDM by magnetic circuit. In this paper, a relation between the thrust constant and size of a LDM that is moving coil type with unipolar is described, which is defined as a simple relational equation. To maximize the rate of thrust to the volume of LDM, the magnetic flux density in the yoke is adjusted to the value of magnetic equation By the magnetic field analysis(FEM), the validity of the equation is confirmed.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.11b
• /
• pp.780-785
• /
• 2001

A moving-magnet type pickup actuator is proposed, which has the back-yoke to improve th sensitivity. Through the magnetic path analysis, we can find that the flux density is increased i the air gap by the pole assignment of magnet and the adding of back-yoke can reduce the flu leakage and induce 40％ up of flux density. Experimental results show that the sensitivity i improved in the tracking direction, however, the improvement doesn't occur in the focusing direction. Finally, the compensation performance is tested in HD-DVD system. And it is verifie that the actuator can compensate the disc tilt of ${\pm}$0.7$^{\circ}$.

• Journal of Communication Design
• /
• v.38
• /
• pp.312-320
• /
• 2012

IPhone users who prefer to study the sensitivity of the subjective aspects of experience design elements, aiming to clarify and subjectivity, Q methodology for the study were able to detect four types through. The first type of usability on the iPhone to pursue the type of individuals who have sufficient understanding of sayongjeok behavior based on the use of features, ease of understanding, the physical sense, usability is important to all who were able to see that consist of: The second types of aesthetics to pursue the type of visual information of the product by the intuitive and subjective aesthetic impression was important to distinguish your type. The third types of discrimination to pursue the type of emotional self-image or self-owned products, to convey a message to anyone seriously here, and the fourth type is the type of active and absolute preference for the iPhone that has been identified as the type of .

• Journal of Industrial Convergence
• /
• v.12 no.2
• /
• pp.40-52
• /
• 2014

I present a theoretical analysis of the charismatic leadership and the follower's role. I distinguish between two types of charismatic relationships and present general propositions about how followers' self-concepts may dertermine the type of charismatic relationship they form with the leader. I conclude by suggesting further the study.

• Economic and Environmental Geology
• /
• v.45 no.4
• /
• pp.397-406
• /
• 2012

During the 2nd Ulleung Basin Gas Hydrate Drilling Expedition (UBGH2) in 2010, gas-hydrate-bearing sediment cores were recovered at 10 drill sites. Base, on Infrared (IR) thermal image and grain-size analysis of the cores, three distinct types of gas hydrate are classified: Type I (fracture-filling in mud layers), Type II (disseminated in mud layers), and Type III (pore-filling in sand layers). Types I and II gas hydrates occur in mud as discrete veins, nodules or disseminated particles. Type III fills the pore spaces of the sand layers encased in mud layers. In this case, the sand content of hosting sediments shows a general linear relationship with gas hydrate saturation. The degrees of temperature anomalies (${\Delta}T$) from IR images generally increase with gas hydrate saturation regardless of gas hydrate occurrence types. Type I is dominantly found in the sites where seismic profiles delineate chimney structures, whereas Type II where the drill cores are composed almost of mud layers. Type III was mainly recovered from the sites where hemipelagic muds are frequently intercalated with turbidite sand layers. Our results indicate that gas hydrate occurrence is closely related to sedimentological characteristic of gas hydrate-bearing sediments, that is, grain size distribution.

• The Journal of Advanced Prosthodontics
• /
• v.2 no.4
• /
• pp.148-153
• /
• 2010

PURPOSE. The aim of this study was to investigate a comparison of implant bone bed preparation with Er,Cr:YSGG laser and conventional drills on the relationship between implant stability quotient (ISQ) values and implant insertion variables. MATERIALS AND METHODS. Forty implants were inserted into two different types of pig rib bone. One group was prepared with conventional drills and a total of 20 implants were inserted into type I and type II bone. The other group was prepared with a Er,Cr:YSGG laser and a total of 20 implants were inserted into type I and type II bone. ISQ, maximum insertion torque, angular momentum, and insertion torque energy values were measured. RESULTS. The mean values for variables were significantly higher in type I bone than in type II bone (P < .01). In type I bone, the ISQ values in the drill group were significantly higher than in the laser group (P < .05). In type II bone, the ISQ values in the laser group were significantly higher than in the drill group (P < .01). In both type I and type II bone, the maximum insertion torque, total energy, and total angular momentum values between the drill and laser groups did not differ significantly (P ${\geq}$ .05). The ISQ values were correlated with maximum insertion torque (P < .01, r = .731), total energy (P < .01, r = .696), and angular momentum (P < .01, r = .696). CONCLUSION. Within the limitations of this study, the effects of bone bed preparation with Er,Cr:YSGG laser on the relationship between implant stability quotient (ISQ) values and implant insertion variables were comparable to those of drilling.

• Journal of The Korean Association For Science Education
• /
• v.34 no.4
• /
• pp.359-366
• /
• 2014

In this study, we try to examine its features by using the methods of systematic infographics analysis for visualization materials that are used in Physics I textbooks. Thus, after developing the analytical framework infographics, visualization materials is described in the section "information and communication" and have been analyzed separately as "data visualization" and "Infographics." The results of this study are as follows. First, the analysis framework of infographics can be classified contents of the information, visual representation, and media method. Second, the visualization materials that are displayed in the section "information and communication" of Physics I textbook are of higher quality than most schematized data that are graphically, simple information. Third, the features of visualization materials in textbooks have many relations & functions on 'information content', text & metaphor on 'visual element', illustration & comparison on 'expression type', graphic on 'expression mode', printed matter on 'media method', and horizontal & vertical type on 'the flow of attention'. From the analysis results, in the section "information and communication" of Physics I textbook uses a lot of visualization materials, however it does not provide rich infographics but only simple graphical materials. By utilizing the results of the analysis of textbook and analysis framework of infographics, which has been developed through the this study, let us hope that the opportunity to be able to grasp the importance of infographics in science education be provided.

• Journal of Korean Academy of Nursing
• /
• v.30 no.2
• /
• pp.498-513
• /
• 2000

The purpose of this study is to construct the nursing-policy and nursing-theory of Korean style by understanding the type of recognition and attitude immanent in Korean people through of Korean people to the Shamanism(巫敎). And this paper is using Q methodology by operant definition. Because individual recognition and attitude to Shammanism is very subjective and individualistic and many-sided. Q statements in this paper are ultimately 38 statements divided into 5 regions, which are abstracted from 285 Q samples. 38 persons in all are objects of P-population. The results of analyses on the characters of each type are as follows. The men who belong to type I is positive to the Shamanism in recognition and attitude at the same time. The men who belong to type II are negative the analysis of the recognition and attitude to Shamanism in recognition, but positive to Shamanism in practical attitude. The men who belong to type III are evidently negative to Shamanism in recognition and attitude at the same time. The men who belong to type IV are positive to Shamanism, but negative or reservative to it in attitude. In conclusion, we could affirm that shamanic care-act which modern medicine discard as only superstition is very deeply rooted in the Korean people'need. In short, Korean people is already and always related to Shamnism, whether positively or negatively. I dare to think this paper might contribute the other disciplines of sciences as basic data.

• Journal of Welding and Joining
• /
• v.19 no.1
• /
• pp.112-117
• /
• 2001

The factor affecting on the fatigue strength of spot welded specimen have been studied. To analyze and predict crack initiation position and propagation directions on the spot welded area are very important for strength design of the automobile body structure. In fact, there are a various of loads in running automobile but, it is impossible to replay like an actual conditions in the laboratory. So, in this study tensile-shear type and in-plane bending type specimens were used in fatigue test and includes an analysis of fatigue crack initiation position and propagation directions about earth specimens. The results obtained in the present study are summarized as follows: 1. In tensile-shear type fatigue test, the region of fatigue crack initiation position was affected by out-of-plane bending deformation due to bending angle. 2 In in-plane bending type fatigue test, the behavior of fatigue crack initiation position and propagation derections due to angle between upper plate and lower plate was dominated by magnitude of in-plane bending moment.