• 접착 및 계면
• /
• 제2권2호
• /
• pp.11-19
• /
• 2001

트리카프릴메틸 암모니움 클로라이드를 상이동촉매로 사용하여 $Na_2S_2O_8$의 수용액과 톨루엔의 이상계에서 질소분위기하에 $60^{\circ}C$에서 스티렌의 라디칼중합을 행하였다. 중합시의 초기 중합속도는 촉매와 $Na_2S_2O_8$의 초기공급 농도보다는 수용액 상에서의 4급 암모늄양이온과 퍼록시디슬페이트 음이온의 농도로 나타낼 수 있었다. 관찰된 초기중합속도를 사용하여 분균일 액-액계에서의 순환 상이동에 의한 개시과정을 포함한 중함메카니즘을 밝힐 수 있었다. 폴리스티렌의 점도평균분자량은 $Na_2S_2O_8$의 농도에 역비례하였는데, 라디칼 중합메카니즘에 의하여 $[Q^+]([S_2O{_8}^{2-}]{\alpha}_2)^{1/2}$로 나타내어졌다.

• 한국전기전자재료학회논문지
• /
• 제28권10호
• /
• pp.665-669
• /
• 2015

We investigated and compared two methods of in-situ oxidation and chemical etching treatment (CET) to remove the boron rich layer (BRL). The BRL is generally formed during boron doping process. It has to be controlled in order not to degrade carrier lifetime and reduce electrical properties. A boron emitter is formed using $BBr_3$ liquid source at $930^{\circ}C$. After that, in-situ oxidation was followed by injecting oxygen of 1,000 sccm into the furnace during ramp down step and compared with CET using a mixture of acid solution for a short time. Then, we analyzed passivation effect by depositing $Al_2O_3$. The results gave a carrier lifetime of $110.9{\mu}s$, an open-circuit voltage ($V_{oc}$) of 635 mV at in-situ oxidation and a carrier lifetime of $188.5{\mu}s$, an $V_{oc}$ of 650 mV at CET. As a result, CET shows better properties than in-situ oxidation because of removing BRL uniformly.

• 한국전기전자재료학회논문지
• /
• 제29권9호
• /
• pp.552-558
• /
• 2016

Goethite, ${\alpha}$-FeOOH have various applications such as absorbent, pigment and source for magnetic materials. Goethite particles were synthesized in a two step process, where $Fe(OH)_2$ were synthesized in nitrogen atmosphere using $FeSO_4$ as a raw material in the first process, and after that acicular goethite particles were obtained in an air oxidation process of $Fe(OH)_2$ in highly alkaline aqueous solution. Their phase and microstructure were investigated with XRD and FE-SEM. It was found that the morphology of goethite and the ratio of length-to-width (aspect ratio) of acicular goethite are dependent on the some factors such as R value ($OH^-/Fe^{2+}$), air flow rate and pH conditions. In particular, R value has the strongest influence on the synthesized goethite morphology. It is considered that the optimal value R is 4.5 because X-ray diffraction peaks of goethite have the highest intensity at that value. Morphology of goethite particles was controlled by air flow rates, showing that their size and aspect ratio are getting smaller and decrease, respectively as air flow rate increases. The largest goethite particle obtained is about 1,500 nm in length and 150 nm in diameter.

• 한국전기전자재료학회논문지
• /
• 제23권7호
• /
• pp.575-579
• /
• 2010

The technologies of Ni/Cu plating contact is attributed to the reduced series resistance caused by a better contact conductivity of Ni with Si and the subsequent electroplating of Cu on Ni. The ability to pattern narrower grid lines for reduced light shading was combined with the lower resistance of a metal silicide contact and an improved conductivity of the plated deposit. This improves the FF (fill factor) as the series resistance is reduced. This is very much requried in the case of low concentrator solar cells in which the series resistance is one of the important and dominant parameter that affect the cell performance. A Selective emitter structure with highly dopeds regions underneath the metal contacts, is widely known to be one of the most promising high-efficiency solution in solar cell processing In this paper the formation of a selective emitter, and the nickel silicide seed layer at the front side metallization of silicon cells is considered. After generating the nickel seed layer the contacts were thickened by Cu LIP (light induced plating) and by the formation of a plated Ni/Cu two step metallization on front contacts. In fabricating a Ni/Cu plating metallization cell with a selective emitter structure it has been shown that the cell efficiency can be increased by at least 0.2%.

• 접착 및 계면
• /
• 제1권1호
• /
• pp.38-46
• /
• 2000

Phosphine oxide와 불소를 함유하는 단량체(bis(3-aminophenyl) 3,5-bis (trifluoromethyl) phenyl phosphine oxide (mDA6FPPO))를 Grignard 반응에 의하여 합성한 다음, 이를 PMDA, 6FDA, BTDA 또는 ODPA와 함께 폴리이미드 합성에 사용하였다. 폴리이미드는 폴리아믹산을 합성한 후 이를 이미드화시키는 방법을 사용하였으며, FT-IR, NMR, DSC 및 점도측정기를 이용하여 분석하였다. 또한 T-peel 시험으로 접착강도를 측정하였다. Phosphine oxide를 함유하는 bis(3-aminophenyl) phenyl phosphine oxide (mDAPPO) 및 상용의 3.3'-diamino diphenyl sulfone (mDDS)로부터 합성된 폴리이미드와 비교하였다. 본 연구에서 합성된 mDA6FPPO를 사용하여 만들어진 폴리이미드는 높은 $T_g$, 우수한 용해도 및 접착성을 보였다.

• 분석과학
• /
• 제34권2호
• /
• pp.68-77
• /
• 2021

Cannabis is one of the most abused drugs in Korea. The main psychoactive component in cannabis, Δ9-tetrahydrocannabinol, is metabolized to 11-nor-9-carboxy-Δ9-tetrahydrocannabinol (THCCOOH) and THCCOOH-glucuronide (THCCOOH-glu) in the human liver, whereby the amount of THCCOOH-glu found in urine is twice as high as that of THCCOOH. The analytical process adapted by the majority of urine drug-testing programs involves a two-step method consisting of an initial immunoassay-based screening test followed by a confirmatory test if the screening test result is positive. In this study, a qualitative gas chromatography-mass spectrometry (GC-MS) method was developed and validated for the detection of THCCOOH in human urine, where THCCOOH-glu was converted into THCCOOH by alkaline hydrolysis. For purification of the urine extract prior to instrumental analysis, high-speed centrifugation was used to minimize interference. In addition, an injection-port derivatization method using ethyl acetate and N,O-bis(trimethylsilyl)-trifluoroacetamide containing 1 % trimethylchlorosilane was employed to reduce the time required for derivatization, and an aliquot of the final solution was injected into the GC-MS. The method was validated by measuring the selectivity, limit of detection (LOD), and repeatability. The sensitivity, specificity, precision, accuracy, Kappa, F-measure, false positive, and false negative rate were determined by comparing the GC-MS results with those obtained using the immunoassay. The LOD was determined to be 0.32 ng/mL, while the repeatability was within 9.1 % for THCCOOH. Furthermore, a comparison study was carried out, whereby the screening immunoassay exhibited a sensitivity of 86.4 % and a specificity of 100 % compared to GC-MS. The applicability of the developed method was examined by analyzing spiked urine and forensic urine samples obtained from suspected cannabis abusers (n = 221).

• 한국광학회지
• /
• 제33권6호
• /
• pp.275-286
• /
• 2022

광학설계 과정의 첫 단계에서 근축 광선이 만족하는 Gauss 방정식에 대한 해를 구할 수 있는 재귀적 수치 계산법을 도출하였다. 설계 사양으로 렌즈 모듈의 굴절력, 렌즈 제1 주요면으로의 입사각과 제2 주요면으로부터의 출사각이 주어지면 렌즈의 주요면 사이의 거리를 선택한 후, 재귀적 수치 계산법을 적용하여 렌즈의 두께, 렌즈 앞면의 곡률 반경과 뒷면의 곡률 반경을 구할 수 있다. 즉, 설계 사양을 만족하는 두께가 다른 여러 등가렌즈를 얻을 수 있다. 모듈이 2개 이상의 렌즈로 구성되는 경우에도 렌즈의 개수를 하나씩 증가하면서 렌즈의 주요면 사이의 거리를 설계 사양에 맞추어 선택한 후 각 렌즈의 두께와 곡률 반경을 결정할 수 있다.

• 대한금속재료학회지
• /
• 제49권1호
• /
• pp.79-84
• /
• 2011

Double-walled carbon nanotubes (DWCNTs) with high purity were produced by the catalytic decomposition of tetrahydrofuran (THF) using a Fe-Mo/MgO catalyst at $800^{\circ}C$. The as-synthesized DWCNTs typically have catalytic impurities and amorphous carbon, which were removed by a two-step purification process consisting of acid treatment and oxidation. In the acid treatment, metallic catalysts were removed in HCl at room temperature for 5 hr with magnetic stirring. Subsequently, the oxidation, using air at $380^{\circ}C$ for 5 hr in the a vertical-type furnace, was used to remove the amorphous carbon particles. The DWCNT suspension was prepared by dispersing the purified DWCNTs in the aqueous sodium dodecyl sulfate solution with horn-type sonication. This was then air-sprayed on ITO glass to fabricate DWCNT field emitters. The field emission properties of DWCNT films related to transmittance were studied. This study provides the possibility of the application of large-area transparent CNT field emission cathodes.

• 한국전산구조공학회논문집
• /
• 제34권4호
• /
• pp.191-197
• /
• 2021

분자동역학에서의 원자들의 유도전하를 계산하기 위해서는 유도전하를 미지수로 하는 선형방정식을 풀어야 하는데 원자들의 위치가 변화할 때마다 필요한 계산이므로 상당한 계산비용이 요구된다. 따라서 효율적인 유도전하 계산 방법은 다양한 시스템을 해석하기 위해서 필수적이다. 본 연구에서는 constraints가 존재하는 Lagrange 방정식의 해에 대한 선형 시스템, 즉 saddle point를 가지는 문제를 해결하기 위해서 Uzawa method를 도입하였다. Uzawa 매개변수가 수렴 속도에 영향을 미치는 단점을 극복하고 행렬 연산의 효율성을 위해서 Schur complement와 preconditioned conjugate gradient (PCG) 방법을 통해 계산의 효율성을 극대화하는 가속 Uzawa algorithm을 적용한다. 두 금속 나노입자가 전기장에 놓여진 분자동역학 수치모델을 통해서 제시된 방법이 유도전하계산의 수렴성, 효율성 측면에서 모두 향상된 결과를 도출함을 확인하였다. 특히 기존의 가우스 소거법에 의한 계산보다 약 1/10으로 계산비용이 절감되었고, 기본 Uzawa method에 비하여 conjugate gradient (CG)의 높은 수렴성이 입증되었다.

• 대한토목학회논문집
• /
• 제29권4A호
• /
• pp.337-346
• /
• 2009

타정식 현수교의 보강형 가설중의 경계조건과 하중조건의 변화를 고려하여 초기형상을 결정하기 위한 구조해석 모델링 방법 및 해석 알고리즘을 제안하였다. 타정식 현수교의 가설단계를 보강형의 가설시점을 기준으로 보강형 가설단계인 1단계와 완공단계의 2단계로 구분하였으며 이러한 가설단계를 고려하여 초기형상해석 단계를 1차 형상해석과 2차 형상보정해석의 2단계로 구분하였다. 각 해석단계에 대한 보강형의 경계조건과 작용하중의 모델링 방법 및 반복해석 알고리즘을 제안하였으며 실 교량에 대해 수치해석을 수행하여 기존 해석방법에 의한 초기형상해석결과와 비교, 분석하였다. 실 교량에 대한 수치해석 결과 기존 초기형상해석방법의 문제점을 파악할 수 있었으며 본 연구에서 제안된 방법을 적용할 경우 기존 방법의 문제점을 해결할 수 있음을 확인하였다.