• 한국멀티미디어학회논문지
• /
• 제19권12호
• /
• pp.1951-1959
• /
• 2016

In this paper, we propose a two-scale fusion method for infrared and visible images using saliency and variance. The images are separated into two scales respectively: a base layer of low frequency component and a detailed layer of high frequency component. Then, these are synthesized using weight. The saliencies and the variances of the images are used as the fusion weights for the two-scale images. The proposed method is tested on several image pairs, and its performance is evaluated quantitatively by using objective fusion metrics.

• 한국응용과학기술학회지
• /
• 제30권3호
• /
• pp.423-430
• /
• 2013

Carbon coils could be synthesized using $C_2H_2/H_2$ as source gases and $SF_6$ as an incorporated additive gas under thermal chemical vapor deposition (CVD) system. Prior to the carbon coils deposition reaction, two kinds of samples having different combination of Ni catalyst and substrate were employed, namely, a commercially-made $Al_2O_3$ ceramic boat with Ni powders and a commercially-made $Al_2O_3$ substrate with Ni layer. By using a commercially-made $Al_2O_3$ ceramic boat, the synthesis of carbon coils could be enhanced as much as 10 times higher than that of $Al_2O_3$ substrate. Furthermore, the dominant formation of the microsized carbon coils could be obtained by using $Al_2O_3$ ceramic boat. The surface roughness of the supporting substrate of $Al_2O_3$ ceramic boat was understood to be associated with the large scale synthesis of carbon coils as well as the dominant formation of the larger-sized, namely the microsized carbon coils.

• The Journal of the Acoustical Society of Korea
• /
• 제20권4E호
• /
• pp.31-38
• /
• 2001

A large-scale synthesis database for a unit selection based synthesis method usually retains redundant synthesis unit instances, which are useless to the synthetic speech quality. In this paper, to eliminate those instances from the synthesis database, we proposed a new pruning method called weighted vector quantization (WVQ). The WVQ reflects relative importance of each synthesis unit instance when clustering the similar instances using vector quantization (VQ) technique. The proposed method was compared with two conventional pruning methods through the objective and subjective evaluations of the synthetic speech quality: one to simply limit maximum number of instance, and the other based on normal VQ-based clustering. The proposed method showed the best performance under 50% reduction rates. Over 50% of reduction rates, the synthetic speech quality is not seriously but perceptibly degraded. Using the proposed method, the synthesis database can be efficiently reduced without serious degradation of the synthetic speech quality.

• Environmental Engineering Research
• /
• 제10권4호
• /
• pp.165-173
• /
• 2005

Nano-sized iron particles were synthesized by reduction of $Fe^{3+}$ in aqueous solution under two reaction conditions, aerobic and anaerobic, and the reactivity of iron was tested by reaction with trichloroethene (TCE) using a batch system. Results showed that iron produced under anoxic condition for both synthesis and drying steps gave rise to iron with higher reduction reactivity, indicating the presence of oxygen is not favorable for production of nano-sized iron deemed to accomplish reactivity enhancement from particle sized reduction. Nano-sized iron sample obtained from the anoxic synthesis condition was further characterized using various instrumental measurements to identity particle morphology, composition, surface area, and particle size distribution. The scanning electron microscopic (SEM) image showed that synthesized particles were uniform, spherical particles (< 100 nm), and aggregated into various chain structures. The effects of other synthesis conditions such as solution pH, initial $Fe^{3+}$ concentration, and reductant injection rate on the reactivity of nano-sized iron, along with standardization of the synthesis protocol, are presented in the companion paper.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 2003년도 한국우주과학회보 제12권2호
• /
• pp.78-78
• /
• 2003

Dwarf galaxies are the most common type of galaxy in the universe and believed to be basic building blocks of the large scale structures. In order to understand the formation history of these galaxies, we selected two well-observed galaxies in the Local Group and constructed the stellar population models including HB stars. We employed Y$^2$ Isochrones (Yi et al. 2001) and HB tracks (Yi et al. 1997) for stellar population synthesis. Our models show that (1) the Carina dSph has several distinct populations with age of ∼10.5, 5.8, 4.1, 2.8 and 1.0 Gyrs, and (2) stellar populations of the Sextans dSph are constructed in terms of the two populations with age of ∼ 11 and ∼2.5 Gyrs. Observational data were kindly provided by Lee et al. (2003, in preparation) and Monelli et al. (2003) for Sextans and Carina dsphs, respectively.

• International Journal of Advanced Culture Technology
• /
• 제3권2호
• /
• pp.100-109
• /
• 2015

Environmental problems from petroleum-based plastic wastes have been rapidly increasing in recent years. The alternative solution is focus on the development of environmental friendly plastic derived from renewable resource. Poly(lactic acid) (PLA) is a biodegradable polymer synthesized from biomass having potential to replace the petroleum-based non-degradable polymers utilizations. PLA can be synthesized by two methods: (1) ring-opening of lactide intermediate and (2) direct polycondensation of lactic acid processes. The latter process has advantages on high yields and high purity of polymer products, materials handling and ease of process treatments. The polymerization process of PLA synthesis has been widely studied in a laboratory scale. However, the mass scale production using direct polycondensation of lactic acid has not been reported. We have investigated the kinetics and scale-up process of direct polycondensation method to produce PLA in a pilot scale. The order of reaction is 2 and activation energy of lactic acid to lactic acid oligomers is 61.58 kJ/mol. The pre-polymer was further polymerized in a solid state polymerization (SSP) process. The synthesized PLA from both the laboratory and pilot scales show the comparable properties such as melting temperature and molecular weight. The appearance of synthesized PLA is yellow-white solid powder.

• 한국재료학회지
• /
• 제33권5호
• /
• pp.222-228
• /
• 2023

Transition metal oxides formed by a single or heterogeneous combination of transition metal ions and oxygen ions have various types of crystal structures, which can be classified as layered structures and non-layered structures. With non-layered structures, it is difficult to realize a two-dimensional structure using conventional synthesis methods. In this study, we report the synthesis of cobalt oxide into wafer-scale nanosheets using a surfactant-assisted method. A monolayer of ionized surfactant at the water-air interface acts as a flexible template for direct cobalt oxide crystallization below. The nanosheets synthesized on the water surface can be easily transferred to an arbitrary substrate. In addition, the synthesizing morphological and crystal structures of the nanosheets were analyzed according to the reaction temperatures. The electrochemical properties of the synthesized nanosheets were also measured at each temperature. The nanosheets synthesized at 70 ℃ exhibited higher catalytic properties for the oxygen evolution reaction than those synthesized at other temperatures. This work suggests the possibility of changing material performance by adjusting synthesis temperature when synthesizing 2D nanomaterials using a wide range of functional oxides, resulting in improved physical properties.

• 한국멀티미디어학회논문지
• /
• 제14권11호
• /
• pp.1507-1515
• /
• 2011

편종의 소리합성을 위한 연구의 첫 단계로 FFT 분석을 통하여 그 음색을 분석하였다. 현대 편종 음계의 음고는 서양의 12평균율의 음고와 큰 차이가 없었다. 편종의 음색은 시간의 흐름에 따라 변화한다. 타격시 모든 주파수 대역에 걸쳐 생성된 노이즈들은 단시간에 사라지고, 고유 배음만이 남는다. 그 후 높은 주파수 성분의 배음부터 차례로 소멸되고 여음부에는 두개의 배음만이 남는데, 이 때 남은 배음의 주파수에 의하여 맥놀이 현상인 발견된다. 본 연구에서 사용된 편종은 비교적 최근에 제작된 편종으로 추후 고대 편종의 음색에 관한 연구가 병행된다면 편종 원형의 소리 합성이 가능할 것이다.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제11권2호
• /
• pp.146-153
• /
• 2006

A passive microfluidic delivery system using hydrophobic valving and pneumatic control was devised for microfluidic handling on a chip. The microfluidic metering, cutting, transport, and merging of two liquids on the chip were correctly performed. The error range of the accuracy of microfluid metering was below 4% on a 20 nL scale, which showed that microfluid was easily manipulated with the desired volume on a chip. For a study of the feasibility of biochemical reactions on the chip, a single enzymatic reaction, such as ${\beta}-galactosidase$ reaction, was performed. The detection limit of the substrate, i.e. fluorescein $di-{\beta}-galactopyranoside$ (FDG) of the ${\beta}-galactosidase$ (6.7 fM), was about 76 pM. Additionally, multiple biochemical reactions such as in vitro protein synthesis of enhanced green fluorescence protein (EGFP) were successfully demonstrated at the nanoliter scale, which suggests that our microfluidic chip can be applied not only to miniaturization of various biochemical reactions, but also to development of the microfluidic biochemical reaction system requiring a precise nano-scale control.

• 자연과학논문집
• /
• 제4권
• /
• pp.23-28
• /
• 1991

The pyrimidy1 derivative of 2'-deoxythmidine 5'-monophosphate, 3 has been synthesized for the development of anticanncer agents. The compound 3 derived from prototype inhibitor 2 by modifying the p-aminobenzoy1 glutamic acid portion has been designed to facilitate the membrane penetration. Variable temperature $^1H$ NMR spectrum for the protected nucleotide has indicated the existence of two conformers which are stable on the NMR time scale at ambient temperature.