• Journal of Ocean Engineering and Technology
• /
• v.15 no.4
• /
• pp.1-7
• /
• 2001

Mainly, Floating Breakwaters (FBs) have been constructed in many coastal regions due to the advantages of the coastal environment and construction cost. In general, the FB becomes fixed or its width broadened because the movement of the FB comes to be large and its the wave control function lower for the long period incident waves. This study discusses the wave control function of two-rowed Fixed Floating Breakwater (FFBs) that have narrower width than that of the one-rowed FFB by using numerical approach. Boundary Element Method (BEM) based on the Green formula and Eigenfunction Expansion Method (EEM) are applied to evaluate the three-dimensional wave transformation near the wave fields of two-rowed FFBs. The validity of the present study is confirmed by comparing it with the results of Ijima et al. (1974) and Yoshida et al. (1992) for the one-rowed Fixed Floating Structure. It is revealed that the wave control function of two-rowed FFBs is more effective than that of the one-rowed FFB.

• Food Science and Biotechnology
• /
• v.14 no.6
• /
• pp.823-827
• /
• 2005

Fusarium mycotoxin deoxynivalenol (DON) contents and its critical quality parameters were analyzed using two-rowed, six-rowed, and hulless barleys. DON content in the two-rowed Korean barleys was lower than that in the six-rowed barleys. The average DON contents of six-rowed, two-rowed, and hulless barleys were 1.35 ppm, 0.36 ppm, and 0.49 ppm, respectively. The DON content was reduced by 6.2% by sieving, by 6.0% by washing with water and by 18.1-69.8% by treatment with aqueous chemical solutions. Of the reagents investigated, aqueous sodium bicarbonate gave the greatest reduction in the barley DON level. The DON content was reduced to 62.5% of initial level after 3 days of steeping and to 23.1% after 3 days of germination. DON was not detected after steeping barley for 24 hr in 0.1M $Na_2CO_3$ solution with 0.1 % activated carbon.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.27 no.1
• /
• pp.41-48
• /
• 1982

A comparison was made for growth and yield of two rowed and six rowed barley varieties to differentiate their fundamental characteris in relation with brewing quality. Heading and maturing time of two rowed barley varieties were similar to those of six rowed covered but were earlier than those of six rowed naked ones. Most of two rowed varieties were spring barley and low temperature susceptible, but they were relatively photoinsensitive compared to six rowed varieties. Eventhough malting barley has heavier stands and grains, they were quite similar in yielding ability with six rowed cultivars with decreased number of grains per spike. In quality characters, malting barley has better germination energy and rate, lower protein content than the common six rowed barley and decisively better for brewing that six rowed barley with higher malt yield, extract yield and quality and enzyme activity. In comparison of malting barley varieties produced in Korea and Japan indicated that those varieties produced in Japan were better in germination characters, extract yield and quality, Kolback index and enzyme activity than those produced in Korea.

• Applied Biological Chemistry
• /
• v.32 no.3
• /
• pp.203-208
• /
• 1989

Eight samples of Korean two-rowed barley, 9 samples of North American barley and 3 samples of Korean six-rowed barley were analysed for 1,000 kernel weight, steeping time, germinative capacity, and protein content. The barley samples were malted with the same malting schedule and analyzed for malting loss, protein content, soluble protein, percent extract, wort viscosity, and diastatic power. The American barleys were higher in germinative capacity, percent extract and diastatic power than the Korean two-rowed barleys. The protein content ranged from 11.8 to 14.2% for the North American barleys and 9.7 to 15.5% for Korean barleys. The three Korean six-rowed barleys were lower in germinative capacity, percent extract and diastatic power, but were higher in wort viscosity than the Korean two-rowed barleys.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.22 no.4
• /
• pp.203-214
• /
• 2010

This study numerically investigates the wave control of 2-rowed Impermeable Rectangular Submerged Dike(IRSD) with an object of how to control short-period and solitary waves simultaneously based on the Bragg resonance phenomenon that elevates the wave control performance. The boundary integral method using Green formula and the 3-D one-field Model for immiscible TWO-Phase flows (TWOPM-3D) by 3-D numerical wave flume have been used for the numerical predictions for short-period and solitary waves, respectively. These numerical models were verified through the comparisons with the previously published numerical results by other researchers. Through the parametric tests of numerical experiments for short-period waves, an optimum model of 2-rowed IRSD of a lowest transmission coefficient has been found. Furthermore, the performances of 3-D wave control for solitary waves were evaluated for the various free board, crown widths and gap distance between dikes, and have been compared with those of a single-rowed IRSD. Numerical results show that a 2-rowed IRSD with a less cross sectional area than 1-rowed one improves the wave attenuation performances when it is compared to that of single-rowed IRSD. Within the test frequency ranges of the numerical simulations conducted in this study, 2-rowed IRSD with an optimum gap distance shows an outstanding improvement of the wave attenuation up to 58% compared to that of single-rowed IRSD.

• Journal of Ocean Engineering and Technology
• /
• v.15 no.3
• /
• pp.107-113
• /
• 2001

This study is focused on the wave control by economical multi-rowed impermeable submerged breakwaters which need less materials than a one-rowed submerged breakwater. A boundary element method and eigenfunction expansion method based on the Green\`s theorem are appled to analyze the characteristics of wave transformation. Submerged breakwaters are consisted of one and two-row with rectangular section. Wave transformation characteristics are investigated by the various combinations of placement distance and crown water depth.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.3B
• /
• pp.323-334
• /
• 2008

Present study examined the functionality of the solitary wave (tsunami) control of the two-rowed porous submerged breakwater by numerical experiments, using a numerical wave tank which is based on the Navier-Stokes equation to explain fluid fields and uses a Volume of Fluid (VOF) method to capture the free water surface. Solitary wave was generated by the internal wave source installed within the computational zone in the numerical wave tank and its wave transformations by structure were compared with those in the previous study. Comparisons with the precious numerical results showed a good agreement. Based on these results, several tow-dimensional numerical modeling investigations of the water fields, including wave transformations, reflection, transmission and energy flux, by the one- and two-rowed permeable submerged breakwater under solitary waves were performed. Even if, it is a research of the limited scope, in case of two-rowed permeable submerged breakwater with $h_0/h=0.925$ ($h_0$ is height of submerged breakwater and h is water depth), the wave height damping in range of $l/L_{eff}>0.4$($L_{eff}$ is effective distance of solitary wave) can reach nearly 60% of the incident wave height. In addition, it is found that reflection coefficient increases nearly 47% and transmission coefficient decreases nearly 18% than one-rowed one. The numerical results revealed that the tow-rowed submerged breakwater can control the incident solitary wave economically and more efficiently than the one-rowed one.

• The Korean Journal of Zoology
• /
• v.6 no.1
• /
• pp.15-20
• /
• 1963

The characteristics of the pharyngeal bones and their teeth in Korean Cyprinids fishes, as a rule, are summarized as follow : 1. The materials 13 genera and 17 species from Nak Dong River. 2. Breadth of bone about 2.8(Cyprinus carpio) to 4.9(Culter brevicauda) in bone length. Length of bone about 8.5(Carassius carassius ) to 20.2 (Pseudogobio esocinus ) in body length. Breadth of pitted surface about 66%(Carassius carassius) to 85%(Acanthorhodeus asmussi ) of breadth of bone. 3. The position and distinct ratio of anterior angle correlated. 4. Posterior limb always longer than anteriro, but posterior edentulous process not shorter than anterior's or equal. 5. Zacco platypus with pitted surface on anterior limb , but Z.temmincki without it. 6. Teeth one to three rowed in accordance with the differences of each genus : a. one rowed genera ..... Carassius , Pseudorasbora, Sarcocheilichthys (Sakiyae), Pungtungia, Acheilognathus, Acanthorhodeus. b. two rowed genera ........ Pseudogobio, Gnathopogon, Tribolodon. c. Three rowed genera .... Cyprinus, Hemibarbus, Zacco , Culter 7. Teeth of main (primary ) row with four or five teeth is symmetrized exceptive three genera (Tribolodon, Zacco, Culter). 8. Grinding surface and bill type correlated. 9. In Acheilognathus, A.Yamatsutae have one or two indistinct serration but each individual is unlike.

• Korean Journal of Soil Science and Fertilizer
• /
• v.43 no.5
• /
• pp.722-727
• /
• 2010

This study was conducted to estimate the carbon footprint and to establish the database of the LCI (Life Cycle Inventory) for barely cultivation system. Barley production system was separated into the naked barley, the hulled barley and the two-rowed barley according to type of barley species. Based on collecting the data for operating LCI, it was shown that input of fertilizer was the highest value of 9.52E-01 kg $kg^{-1}$ for two-rowed braley. For LCI analysis focussed on the greenhouse gas (GHG), it was observed that carbon footprint were 1.25E+00 kg $CO_2$-eq. $kg^{-1}$ naked braley, 1.09E+00 kg $CO_2$-eq. $kg^{-1}$ hulled braley and 1.71E+00 $CO_2$-eq. $kg^{-1}$ two-rowed barley; especially two-rowed barley cultivation system had highest emission value as 1.09E+00 kg $CO_2$ $kg^{-1}$ barley. It might be due to emit from mainly fertilizer production for barley cultivation. Also $N_2O$ was emitted at 7.55E-04 kg $N_2O\;kg^{-1}$ barley as highest value from hulled barley cultivation system because of high N fertilizer input. The result of life cycle impcat assessment (LCIA), it was observed that most of carbon emission from barely cultivation system was mainly attributed to fertilizer production and cropping unit. Characterization value of GWP was 1.25E+00 (naked barley), 1.09E+00 (hulled barley) and 1.71E+00 (two-rowed barely) kg $CO_2$-eq. $kg^{-1}$, respectively.

• Korean Journal of Food Science and Technology
• /
• v.26 no.2
• /
• pp.172-177
• /
• 1994

This study was conducted to evaluate malt quality characteristics of barley cultivars(2- and 6-rowed barley) grown in Korea. Changes in ${\beta}-glucan$ content during malting process were also investigated. Two-rowed varieties of barley exhibited considerably higher values in test weight(TW), 1,000 kernel weight (1,000 KW), and % plumpness than six-rowed barley varieties, which obviously influenced the level of malt extract. Six-rowed barley samples had slightly higher levels of ${\beta}-glucan$ content than two-rowed ones. There were varietal differences in malt quality characteristics and degree of malt modification. During malting process, ${\beta}-glucan$ content was significantly reduced and the rate of the ${\beta}-glucan$ degradation was dependent on the variety. Total ${\beta}-glucan$ content present in raw barley tended to affect wort viscosity. A high correlationship was observed between ${\beta}-glucan$ content in malt and wort viscosity, suggesting that malt ${\beta}-glucan$ content was highly associated with malt quality.