• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 1999년도 유체기계 연구개발 발표회 논문집
• /
• pp.27-32
• /
• 1999

A numerical study based on the three-dimensional thin-layer Navier-Stokes solver is carried out to analyze the flowfield through a single stage transonic compressor. Explicit four-step Runge-Kutta scheme with spatially variable time step and implicit residual smoothing is used. The governing equations are discretized with exploit finite difference method. Mixed-out average method is used at the interface between rotor and stator. And, an artificial dissipation model is used to assure the stability of solution. The results with k-$\omega$ turbulence model were compared to the results with Baldwin-Lomax model, and physical phenomena of transonic compressor are presented. The two turbulence models give the results that show reasonably good agreements with experimental data.

• Geomechanics and Engineering
• /
• 제29권6호
• /
• pp.645-655
• /
• 2022

Granular columns have recently found widespread use in underground construction. The behaviour of granular columns under vertical loads has been extensively studied, specifically in relation to vertical load capacity obtained by bulging of the column body, including the behaviour after encasement of material. Determining the shear strength of loose soils reinforced with granular columns has received less attention. After the observations of lateral deformation near the toe of the embankment, attempts have been made to strengthen the lateral strength of granular columns. The purpose of this research is to look into the effects of different encasement conditions on the lateral load capacity of granular columns. This was accomplished by three-dimensional finite element analysis with FEM software. Various normal pressures and two different encasement configurations, namely single layer encasement and double layer encasement, with differing tensile strengths, were used in this study to determine their effect on lateral resistance. The failure envelope for a single column planted in loose sand was used to analyse the findings for three different granular column diameters, as well as the impact of different encasement conditions. According to the findings, the inclusion of a Granular Column enhanced the shear strength and overall stiffness of the loose sand bed, and the encasement of the Granular Column helped in deriving higher lateral resistance.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제12권6호
• /
• pp.2595-2618
• /
• 2018

In this paper, we investigate secure communication with the presence of multiple eavesdroppers (Eves) in a two-tier downlink dense heterogeneous network, wherein there is a macrocell base station (MBS) and multiple femtocell base stations (FBSs). Each base station (BS) has multiple users. And Eves attempt to wiretap a macrocell user (MU). To keep Eves ignorant of the confidential message, we propose a physical-layer security scheme based on cross-layer cooperation to exploit interference in the considered network. Under the constraints on the quality of service (QoS) of other legitimate users and transmit power, the secrecy rate of system can be maximized through jointly optimizing the beamforming vectors of MBS and cooperative FBSs. We explore the problem of maximizing secrecy rate in both non-colluding and colluding Eves scenarios, respectively. Firstly, in non-colluding Eves scenario, we approximate the original non-convex problem into a few semi-definite programs (SDPs) by employing the semi-definite relaxation (SDR) technique and conservative convex approximation under perfect channel state information (CSI) case. Furthermore, we extend the frame to imperfect CSI case and use the Lagrangian dual theory to cope with uncertain constraints on CSI. Secondly, in colluding Eves scenario, we transform the original problem into a two-tier optimization problem equivalently. Among them, the outer layer problem is a single variable optimization problem and can be solved by one-dimensional linear search. While the inner-layer optimization problem is transformed into a convex SDP problem with SDR technique and Charnes-Cooper transformation. In the perfect CSI case of both non-colluding and colluding Eves scenarios, we prove that the relaxation of SDR is tight and analyze the complexity of proposed algorithms. Finally, simulation results validate the effectiveness and robustness of proposed scheme.

• 대한화학회지
• /
• 제60권5호
• /
• pp.321-326
• /
• 2016

Two new polymeric complexes, [Zn(dpa)(pyz)_0.5]_n (1; dpa = diphenate and pyz = pyrazine) and [Mn₃(bpdc)₃(py)₄]_n (2; bpdc = biphenyl-4,4'-dicarboxylate and py = pyridine) were successfully isolated by the hydro- and solvo-thermal technique, respectively. The complexes were characterized by elemental and thermal analysis, vibrational IR spectroscopy, and by single crystal x-ray structure determination. For 2, magnetic property was also investigated. Complex 1 is a two-dimensional layer structure consisting of a paddle-wheel building unit of Zn-dpa chains bridged by pyrazine. While, complex 2 consists of linear trimeric Mn3 cluster as building unit to form 3D network. In the complexes, dpa²⁻ (1) and bpdc²⁻(2) ligands show a typical bis-monodendate bridging and two kinds of bridging modes; a typical bridging and chelating/bridging mode, respectively.

• Journal of Magnetics
• /
• 제20권3호
• /
• pp.308-311
• /
• 2015

We design a crisscrossed double-layer birdcage (DLBC) coil by modifying the coil geometry of a standard single-layer BC (SLBC) coil to enhance the homogeneity of transmitting magnetic flux density ($B_1{^+}$) along the main magnetic field ($B_0$)-direction for small-animal magnetic resonance imaging (MRI) at 300 MHz. The performance assessment of the crisscrossed DLBC coil is conducted by computational analysis with the finite-difference time domain method (FDTD) and compared with SLBC coil in terms of the $B_1$ and the $B_1{^+}$ distribution. As per the computational calculation studies, the mean value in the two-dimensional $B_1{^+}$ map obtained at the mid-axial slice with the proposed DLBC coil is slightly lower than that obtained with the SLBC coil, but the $B_1{^+}$ value of the DLBC coil in the outermost plane (40 mm away from the central plane) shows improvements of 19.3% and 24.8% over the SLBC coil $B_1{^+}$ value when simulating a spherical phantom and realistic mouse body modeling. These simulation results indicate that, the $B_1{^+}$ homogeneity along the z-direction was improved by using DLBC configuration. Our approach enables $B_1{^+}$ homogeneity improvement along the zdirection, and it can also be applied to ultra-high field (UHF) MRI systems.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2008년도 제30회 춘계학술대회논문집
• /
• pp.285-288
• /
• 2008

본 연구는 연료(수소)층과 산화제(공기)층의 사이에 불활성기체(질소)또는 연료(수소)를 평행분사하는 수치해석을 다루고 있다. 수치해석을 위해서 완전 보존되는 비정상 2차 시간정확도법과 2차 TVD방법이 유한 체적법과 사용되었다. 결과는 3가지 종류로 구성되어있다. 첫째는 연료와 산화제의 단일 혼합층이고, 둘째는 연료와 산화제의 사이에 불활성기체를 분사하는 방식이며, 세 번째는 연료와 산화제의 사이에 연료를 분사하는 방식이다. 전체 유동층의 수직두께는 4cm이며 삽입된 중간층의 두께는 1,2,4mm의 세가지 경우에 대하여 계산하였다.

• Applied Microscopy
• /
• 제40권1호
• /
• pp.21-28
• /
• 2010

단층 및 복층의 그래핀에 대한 원자분해 투과전자현미경 영상 시뮬레이션 연구에서, 통상의 Boch-wave 방법에 의한 영상이론식들이 고 준위 Laue 영역의 역 격자 회절을 적절히 포함 했을 때 시뮬레이션에 잘 적용될 수 있음을 보여 주었다. 적절한 조건에서 복층 그래핀의 시뮬레이션 영상들은 육방정계의 대칭성 보다는 삼방정계의 대칭성을 보여 주었다. 이 결과는 복층 그래핀이 3차원 공간에서 [0001] 축 방향 회전에 대해 갖는 삼방정계의 격자 대칭성이 영상에 구현되는 것으로 이해될 수 있다. 단층 그래핀에 대해서는, 관측 위상영상이 삼방정계의 대칭성을 보여주는 현상들이 특히 주목되었다. 이 현상은 그래핀 표면에 전자 밀도의 재 배치에 의한 것으로 설명되었다. 그리고 그래핀의 전자 재 배치를 반영하는, 다만 2번째 Laue 준위 영역의 회절 빔까지만 포함하면 관측 영상과 일치하는 시뮬레이션 위상 영상이 얻어졌다.

• 대한기계학회논문집
• /
• 제15권1호
• /
• pp.229-240
• /
• 1991

본 연구에서 사용한 이론과 제시된 방법의 타당성을 검토하기 위하여 익열 간 극이 무한대인 단일 익형 주위의 유동장을, 최근에 개발된 계산방법인 Lambda방법을 사용한 Dadone의 해석결과와 비교하였고, 범용의 압축기 익형인 NACA65게열 익열 유동 에 대한 Herrig의 실험값, 그리고 미분해석에 의한 점성-비점성 상호작용 방법을 사용 한 Hansen의 계산값고, 이들 조건과 동일한 상태에서 본 연구에서 제시한 방법으로 계 산한 결과와 만족할 만한 일치를 얻었다.

• 한국해양공학회지
• /
• 제37권3호
• /
• pp.89-98
• /
• 2023

Analyzing the interactions of free surface waves caused by a submerged-body movement is important as a fundamental study of submerged-body motion. In this study, a two-dimensional mini-towing tank was used to tow an underwater body for analyzing the generation and propagation characteristics of free surface waves. The magnitude of the maximum wave height generated by the underwater body motion increased with the body velocity at shallow submerged depths but did not increase further when the generated wave steepness corresponded to a breaking wave condition. Long-period waves were generated in the forward direction as the body moved initially, and then short-period waves were measured when the body moved at a constant velocity. In numerical simulations based on potential flow, the fluid pressure changes caused by the submerged-body motion were implemented, and the maximum wave height was accurately predicted; however, the complex physical phenomena caused by fluid viscosity and wave breaking in the downstream direction were difficult to implement. This research provides a fundamental understanding of the changes in the free surface caused by a moving underwater body.

• Journal of Magnetics
• /
• 제13권4호
• /
• pp.144-148
• /
• 2008

The size and surface effects on the magnetism of a fcc Fe (001) surface was investigated by performing firstprinciples calculations on 3, 5, 7, and 9 monolayers fcc Fe (001) single slabs with two different two-dimensional lattice constants, ${\alpha}=3.44{\AA}$ (System I) and 3.65 ${\AA}$ (System II), using the all-electron full-potential linearized augmented plane wave method within a generalized gradient approximation. The surface layers were coupled ferromagnetically to the subsurface layer in both systems. However, the magnetism of the inner layers was quite different from each other. While all the inner layers of System II were ferromagnetically coupled in the same way as the surface layer, the inner layers of System I showed a peculiar magnetism, bilayer antiferromagnetism. The calculated spin magnetic moments per Fe atom were approximately 2.7 and 2.9 ${\mu}_B$ at the surface for Systems I and II, respectively, due to the almost occupied Fe d-state being in the majority spin state and band narrowing. The spin orientations of System I were out-of-plane regardless of its thickness, whereas the orientation of System II changed from out-of-plane to in-plane with increasing thickness.