• Journal of The Korean Society of Integrative Medicine
• /
• v.8 no.4
• /
• pp.39-47
• /
• 2020

Purpose : The purpose of this study was to investigate a comparative study on the effects of maximum voluntary ventilation (MVV) and thickness of the abdominal muscles through two Kegel exercise postures. Methods : Twenty eight (male= 7, female= 21) subjects participated in this experiment. They performed Kegel exercise in sitting and hooklying. The order of exercise was conducted in the order chosen by the subjects to exclude the learning effect. The MVV was measured using a spirometer. The thickness of the abdominal muscles were measured by ultrasound. The MVV and thickness of the abdominal muscles were measured according to the manual in a sitting and hooklying position before the experiment. After each exercise, the MVV and thickness of the abdominal muscles were also measured in the same way. A one way repeated measures analysis of variance (ANOVA) was used to compare the MVV and thickness of the abdominal muscles according to two postures and post hoc analysis, Bonferroni was used. Results : As a result of this study, significant differences in the MVV were observed after exercise than before exercise (p<.05). However, as a result of post hoc analysis, there was no difference in the MVV according to the postures (p>.05). Significant differences in thickness of the abdominal muscles were observed after exercise than before exercise (p<.05). However, as a result of post hoc analysis, there was no difference in thickness of the abdominal muscles according to the postures (p>.05). Conclusion : Based on the results of this study, the MVV and the thickness of the abdominal muscles were confirmed in the sitting and hooklying posture after Kegel exercise. However, further studies on vital capacity and abdominal muscles according to Kegel exercise postures should be conducted.

• Journal of the Semiconductor & Display Technology
• /
• v.20 no.2
• /
• pp.92-97
• /
• 2021

The importance of processes in cryogenic environments is increasing in a way to address problems such as critical dimension (CD) narrow and bottlenecks in micro-processing. Accordingly, in this paper, we proceed with the design and analysis of Electrostatic Chuck(ESC) and Coolant in cryogenic environments, and present optimal model conditions to provide the temperature distribution analysis of ESC in these environments and the appropriate optimal design. The wafer temperature uniformity was selected as the reference model that the operating conditions of the refrigerant of the liquid nitrogen in the doubled aluminum path were excellent. Design of simulation (DOS) was carried out based on the wheel settings within the selected reference model and the classification of three mass flow and diameter case, respectively. The comparison between factors with p-value less than 0.05 indicates that the optimal design point is when five turns of coolant have a flow rate of 0.3 kg/s and a diameter of 12 mm. ANOVA determines the interactions between the above factor, indicating that mass flow is the most significant among the parameters of interests. In variable selection procedure, Case 2 was also determined to be superior through the two-Sample T-Test of the mean and variance values by dividing five coolant wheels into two (Case 1 : 2+3, Case 2: 3+2). Finally, heat transfer analysis processes such as final difference method (FDM) and heat transfer were also performed to demonstrate the feasibility and adequacy of the analysis process.

• The Journal of Asian Finance, Economics and Business
• /
• v.8 no.1
• /
• pp.53-59
• /
• 2021

This research aims to examine the model of investor herding behavior in making investment decisions in the Indonesian capital market, which is influenced by social and information impacting on the value of the Book Value Per Share (BVPS). The latest stock market conditions show that most investors make the same error pattern in making investment decisions that result in losses. The experiment involves two independent variables, namely, information about BVPS and social influence. This study used a 2×2 factorial design laboratory experimental method. Data collection was carried out through treatment of a sample of 100 individual investors listed on the Indonesia Stock Exchange. Univariate Two-Way Analysis of Variance (ANOVA) statistical tool was used to test the independent variable on the dependent variable. Research results showed that the social influence originating from expert investors is more influential than the Book Value Per Share (BVPS) information on the behavior of herding investors in making investment decisions. These findings suggest that investors know their psychological factors, thereby increasing self-control and investment analysis skills. Further research can use psychological bias and other indicators of accounting relevant information such as Earning Per Share (EPS) to test herding behavior in investment decision making in the capital market.

• The Journal of Korean Academy of Prosthodontics
• /
• v.48 no.4
• /
• pp.243-250
• /
• 2010

Purpose: This study evaluated the effect of different screw tightening sequences and methods on detorque values in a well-fitting implant superstructure. Materials and methods: A fully edentulous mandibular master model and a metal framework directly connected to four parallel implants (Astra Tech) with a passive fit to each other were fabricated. Six stone casts were made with a splinted impression technique to represent a 'well-fitting' situation with the metal framework. Detorque values were measured twice after screw tightening using 20 Ncm. Detorque values and minimum detorque values for three screw tightening sequences (1-2-3-4, 2-4-3-1, and 2-3-1-4) and for two tightening methods (two-step and one-step) were analyzed using multi-way analysis of variance and two-way analysis of variance, respectively, at a .05 level of significance. Results: The mean detorque values for screw tightening sequences ranged from 12.8 Ncm (2-4-3-1) to 13.1 Ncm (2-3-1-4), and for screw tightening methods were 13.1 Ncm (two-step) and 11.8 Ncm (one-step). The mean of mimimum detorque values for screw tightening sequences were 11.1 Ncm (1-2-3-4) and 11.2 Ncm (2-4-3-1 and 2-3-1-4), and for screw tightening methods were 11.2 Ncm (two-step) and 9.9 Ncm (one-step). No statistically significant differences among three screw tightening sequences were found for detorque values and for mimimum detorque values. But, statistically significant differences between two screw tightening methods were found for two values. Two-step screw tightening method showed higher detorque value (P = .0003) and higher minimum detorque value (P = .0035) than one-step method. Conclusion: Within the limitations of this study, the screw tightening sequence was not a critical factor for the detorque values in a well-fitting implant superstructure by the splinted impression technique. But, two-step screw tightening method showed greater detorque values than one-step method.

• The Journal of Korean Academy of Orthopedic Manual Physical Therapy
• /
• v.22 no.1
• /
• pp.1-7
• /
• 2016

Background: The purpose of this study was to investigate the effects of lumbar stabilization exercise with neurodynamic techniques on lumbar muscular strength and Oswestry index in lumbar disc herniation patient. Method: The Lumbar stabilization exercise with neurodynamic techniques was performed by 30 pt's in G hospital. The subjects were randomly organized into a study group 15 and control group 15. The exercises and neurodynamic technique were conducted for 40 minutes and, 3 times a week (total 24 times for 8 weeks). General characteristics of the Lumbar muscular strength and Oswestry disability index (ODI) were measured before the training and at 4 weeks and 8 weeks after the intervention. Comparison of the time dependent variable for each group was Calculated by a one way repeated analysis of variance (ANOVA). Comparison between the two groups was Calculated by an analysis of covariance (ANCOVA). Result: There was a significant difference in the Lumbar muscular strength and ODI (p<.05). Similarly in the inter-group analysis, significant differences (p<.05) occurred. Conclusion: In this study, we demonstrated that lumbar stabilization exercises with neurodynamic techniques are an effective therapy for Lumbar muscular strength and ODI in lumbar disc herniation patient's.

• Restorative Dentistry and Endodontics
• /
• v.48 no.3
• /
• pp.30.1-30.11
• /
• 2023

Objectives: This study verified the possibility of cementing fiberglass-reinforced posts using a flowable bulk-fill composite (BF), comparing its push-out bond strength and microhardness with these properties of 3 luting materials. Materials and Methods: Sixty endodontically treated bovine roots were used. Posts were cemented using conventional dual-cured cement (CC); self-adhesive cement (SA); dual-cured composite (RC); and BF. Push-out bond strength (n = 10) and microhardness (n = 5) tests were performed after 1 week and 4 months of storage. Two-way repeated measures analysis of variance (ANOVA), 1-way ANOVA, t-test, and Tukey post-hoc tests were applied for the push-out bond strength and microhardness results; and Pearson correlation test was applied to verify the correlation between push-out bond strength and microhardness results (α = 0.05). Results: BF presented higher push-out bond strength than CC and SA in the cervical third before aging (p < 0.01). No differences were found between push-out bond strength before and after aging for all the luting materials (p = 0.84). Regarding hardness, only SA presented higher values measured before than after aging (p < 0.01). RC and BF did not present 80% of the maximum hardness at the apical regions. A strong positive correlation was found between the luting materials' push-out bond strength and microhardness (p < 0.01, R² = 0.7912). Conclusions: The BF presented comparable or higher push-out bond strength and microhardness than the luting materials, which indicates that it could be used for cementing resin posts in situations where adequate light curing is possible.

• The Journal of Advanced Prosthodontics
• /
• v.11 no.3
• /
• pp.162-168
• /
• 2019

PURPOSE. The aim of this study was to evaluate the effect of occlusal adjustments on the surface roughness of yttria-tetragonal zirconia polycrystal (Y-TZP) and wear of opposing artificial enamel. MATERIALS AND METHODS. Twenty-five Y-TZP slabs from each brand (Lava, 3M and Bruxzir, Glidewell Laboratories) with different surface conditions (Control polished - CPZ; Polished/ground - GRZ; Polished/ground/repolished - RPZ; Glazed - GZ; Porcelain-veneered - PVZ; n=5) were abraded (500,000 cycles, 80 N) against artificial enamel (6 mm diameter steatite). Y-TZP roughness (in ${\mu}m$) before and after chewing simulation (CS) and antagonist steatite volume loss (in $mm^3$) were evaluated using a contact surface profilometer. Y-TZP roughness was analyzed by three-way analysis of variance (ANOVA) and steatite wear by two-way ANOVA and Tukey Honest Difference (HSD) (P=.05). RESULTS. There was no effect of Y-TZP brand on surface roughness (P=.216) and steatite loss (P=.064). A significant interaction effect (P<.001) between surface condition and CS on Y-TZP roughness was observed. GZ specimens showed higher roughness after CS (before CS - $3.7{\pm}1.8{\mu}m$; after CS - $13.54{\pm}3.11{\mu}m$), with partial removal of the glaze layer. Indenters abraded against CPZ ($0.09{\pm}0.03mm^3$) were worn more than those abraded against PVZ ($0.02{\pm}0.01mm^3$) and GZ ($0.02{\pm}0.01mm^3$). Higher wear caused by direct abrasion against zirconia was confirmed by SEM. CONCLUSION. Polishing with an intraoral polishing system did not reduce the roughness of zirconia. Wear of the opposing artificial enamel was affected by the material on the surface rather than the finishing technique applied, indicating that polished zirconia is more deleterious to artificial enamel than are glazed and porcelain-veneered restorations.

• Journal of Technologic Dentistry
• /
• v.42 no.4
• /
• pp.326-333
• /
• 2020

Purpose: The purpose of this study was to evaluate the effects of various zirconia surface treatment methods on shear bond strength with resin cements. Methods: We prepared 120 cylindrical zirconia specimens (⌀10 mm×10 mm) using computer-aided design/computer-aided manufacturing (CAD/CAM). Each specimen was randomly subjected to one of four surface treatment conditions: (1) no treatment (control), (2) airborne-particle abrasion with 50 ㎛ of Al2O3 (A50), (3) airborne-particle abrasion with 125 ㎛ of Al2O3 (A125), and (4) ZrO2 slurry (ZA). Using a polytetrafluoroethylene mold (⌀6 mm×3 mm), we applied three resin cements (Panavia F 2.0, Super-Bond C&B, and Variolink N) to each specimen. The shear bond strength tests were performed in a universal testing machine. The surfaces of representative specimens of each group were evaluated under scanning electron microscope. We used one-way analysis of variance (ANOVA), two-way ANOVA, and post hoc Tukey honest significant difference test to analyze the data. Results: In the surface treatment method, the A50 group showed the highest bond strength, followed by A125, ZA, and control groups; however, no significant difference was observed between A50 and A125, A125 and ZA, and ZA and control (p>0.05). Among the resin cements, Super-Bond C&B showed the highest shear bond strength, followed by Panavia F 2.0 and Variolink N (p<0.05). Conclusion: Within the limitations of this study, application of airborne-particle abrasion and ZrO2 slurry improved the shear bond strength of resin cement on zirconia.

• Korean Journal of Applied Biomechanics
• /
• v.27 no.2
• /
• pp.125-132
• /
• 2017

Objective: The aim of this study was to investigate the effect of targeted knee flexion angle on biomechanical factors of knee joint between upward and downward phases during the forward lunge. Method: Eight elderly subjects (age: $22.23{\pm}1.51years$, weight: $69{\pm}6.63kg$, height: $174.88{\pm}6.85cm$) participated in this study. All reflective marker data and ground reaction force during a forward lunge were collected. The knee joint movement and reaction force and joint moment at maximum knee flexion angle were compared by repeated measures one-way analysis of variance (ANOVA) (p<.05). The peak knee joint reaction force and joint moment between upward and downward phases were compared by repeated measures two-way ANOVA (p<.05). Results: The anterior and vertical knee joint movements, reaction force, and extensor moment of $80^{\circ}$ targeted knee flexion condition at maximum knee flexion angle was greater than both $90^{\circ}$ and $100^{\circ}$ conditions (p<.05). The $80^{\circ}$ knee flexed angle condition had greater peak joint reaction force and extensor moment compared with both $90^{\circ}$ and $100^{\circ}$ conditions between upward and downward phases during the forward lunge. Conclusion: As the targeted knee joint flexion angle increases, knee joint movement and kinetic variables become greater during the forward lunge exercise.

• Restorative Dentistry and Endodontics
• /
• v.39 no.1
• /
• pp.17-23
• /
• 2014

Objectives: This study evaluated the efficacy of Endosolv-R and Xylene in softening epoxy resin based sealer after 1 to 2 min exposure. Materials and Methods: Sixty Teflon molds ($6mm{\times}1.5mm$ in inner diameter and depth) were equally divided into 3 groups of 20 each. AH 26 (Dentsply/De Trey), AH Plus (Dentsply/De Trey), Adseal (Meta-Biomed) were manipulated and placed in the molds allotted to each group and allowed to set at $37^{\circ}C$ in 100% humidity for 2 wk. Each group was further divided into 2 subgroups according to the solvents used, i.e. Xylene (Lobachemie) and Endosolv-R (Septodont). Specimens in each subgroup were exposed to respective solvents for 1 and 2 min and the corresponding Vicker's microhardness (HV) was assessed. Data was analysed by Mauchly's test and two-way analysis of variance (ANOVA) with repeated measures, and one-way ANOVA. Results: Initial hardness was significantly different among the three sealers with AH Plus having the greatest and Adseal having the least. After 2 min, Xylene softened AH Plus and Adseal sealer to 11% and 25% of their initial microhardness, respectively (p < 0.001), whereas AH 26 was least affected, maintaining 89.4% of its initial microhardness. After 2 min, Endosolv-R softened AH 26, AH Plus and Adseal to 12.7, 5.6 and 8.1% of their initial microhardness, respectively (p < 0.001). Conclusions: Endosolv-R was a significantly more effective short term softener for all the tested sealers after 2 min whereas Xylene was an effective short term softener against AH plus and Adseal but less effective against AH 26.