• Journal of KSNVE
• /
• v.5 no.3
• /
• pp.373-383
• /
• 1995

From the viewpoint of the structural design, the principal problem of the heat exchanger is the potentiality of structural instabilities due to the fluid loading effect during operations. Excessive fluid loading may give rise to permanent deformation of tube and would enentually result in collapse of heat exchanger, which would cause an obstruction of the fluid flow in the narrow channels. In this study, a fluid-structural interaction model was developed to investigate analtically the vibration characteristics of thin rectangular tube used in the heat exchanger. The model consists of two flat plates separated by fluid. The effects of the fluid in the tube was stuided. For analyses, the natural frequency coefficients of the model were investigated for the plate aspect ratios, channel heights, and boundary conditions. As conclusions, the natural frequency coefficients of the tube is found to be affected largely by the fluid loading and the channel heights.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.12
• /
• pp.2541-2549
• /
• 2002

In order to study the vibration characteristics of fluid-structure interaction problem, two rectangular plates coupled with bounded fluid were investigated. Experimental modal analyses were carried out to extract the modal parameters of the system. Additionally. finite element modal analyses performed using a commercial computer code, ANSYS. The FEM solutions were compared with the experimental solutions to verify the finite element model. As a result, the comparison between the experiment and FEM results showed excellent agreement. The transverse vibration modes, in-phase and out-of-phase, were observed alternately in the fluid-coupled system. The thickness effect of the plates on the fluid-coupled natural frequencies and mode shapes was investigated for two different cases with the identical thickness and the unequal thickness. It was found that the coupled natural frequencies increase with the thickness for the identical plates regardless of the mode phase. The experimental and the finite element analysis results showed that the out-of-phase mode shapes were deviated from the symmetrical mode shapes in the plate transverse direction fur the unequal plate thickness case.

• 한국전산유체공학회:학술대회논문집
• /
• 2011.05a
• /
• pp.291-293
• /
• 2011

In this paper, the problem of transonic aerodynamic characteristics of a NACA0012 airfoil is numerically investigated in the inviscid gas-droplet two-phase flow with the compressible two-fluid model. In the present study, the airfoil flight in the cloud is simulated by taking account of the viscous drag of the droplets, the heat transfer, the phase change, and the droplet fragmentation The two-fluid equation system is solved by the fractional-step method and the WAF-HIL scheme. The effects of size and volume fraction of the droplets on the flow characteristics of the airfoil in the cloud are elaborated and discussed.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.24 no.4
• /
• pp.19-36
• /
• 1987

In this research the coupling problem between the elastic structure and the fluid, specially the hydroelastic harmonic vibration problem, is studied. In order to couple the domains, i.e., the structural domain and the fluid domain, the boundary integral method(direct boundary integral formulation) is used in the fluid domain in combination with the finite element method for the structure. The boundary integral method has been widely developed to apply it to the hydroelastic vibration problem. The hybrid boundary integral method using eigenfunctions on the radiation boundaries and the boundary integral method using the series form image-functions to replace the even bottom and free surface boundaries in case of high frequencies have been developed and tested. According to the boundary conditions and the frequency ranges the different boundary integral methods with the different idealizations of the fluid boundaries have been studied. Using the same interpolation functions for the pressure distribution and the displacement the two domains have been coupled and using Hamilton principle the solution of the hydroelastic have been obtained through the direct minimizing process. It has become evident that the finite-boundary element method combining with the eigenfunction or the image-function method give good results in comparison with the experimental ones and the other numerical results by the finite element method.

• Communications of the Korean Mathematical Society
• /
• v.39 no.2
• /
• pp.513-534
• /
• 2024

The main goal of this work is to study an initial boundary value problem relating to the unsteady flow of a rigid, viscoplastic, and incompressible Bingham fluid in an elastic bounded domain of ℝ². By using the approximation sequences of the Faedo-Galerkin method together with the regularization techniques, we obtain the results of the existence and uniqueness of local solutions.

• 한국전산유체공학회:학술대회논문집
• /
• 2007.10a
• /
• pp.39-44
• /
• 2007

A similarity solution of the Navier-Stokes equation for the axisymmetric stagnation flow near a plane wall coated with a magnetic fluid of uniform thickness is constructed. The shape functions representing the flow in two (magnetic and normal) fluid layer are determined from a third order boundary value problem, which is solved by the Runge-Kutta method with two shooting parameters. Features of the flow including streamline pattern and interface velocity are investigated for the varying values of density ratio, viscosity ratio, and Reynolds number. The results for the interface and wall shear stress, boundary layer and displacement thickness are also presented.

• Proceedings of the KSME Conference
• /
• 2000.11a
• /
• pp.475-480
• /
• 2000

The transient dynamic-response analysis of fuel-storage tanks of flying vehicles accelerating in the vertical direction is achieved with finite element method. A fuel-storage tank is a representative example of the fluid-structure interaction problem, in which structure and fluid media interact strongly. For the accurate analysis of this complicated fluid-structure system, we employed ALE(arbitrary Lagrangian-Eulerian) coupling method. Two types of fuel-storage tanks, one with two baffles and the other without baffle, are considered to examine the effect of baffles. The fuel-storage tank with baffles shows more uniform hydrodynamic pressure distribution, resulting effective stress in structural region and faster convergence from transient to steady states. MSC/Dytran, a commercial FEM software for the 3D coupled dynamic analysis, is used for this analysis.

• Journal of Veterinary Clinics
• /
• v.15 no.1
• /
• pp.62-74
• /
• 1998

In feedlot cattle the abrupt change of diet from roughage to a large quantity of grain for the purpose to improve production often results in increased occurrence of rumen acidosis or acute carbohydrate encouragement enterotoxemia, bloats diarrhea liver abscess and laminitis or robot disease. The common management practice to control these problem is to increase the amount of concentrates in the diet in a stepwise manner until the animals are adapted to a high-grain ration. However this practice requires at least about 3 weeks adaptation period and specially prepared adaptation rations which contain various amount of concentrates. Present experiment was undertaken in order to findout the more simple and rapid adaptation method of cattle to a high grain ration. Nineteen Korean calves aging from four to six month were fed artifical hay (Youngchoun Chuk-Hyup, Korea) which contains 10% of concentrates or alfalfa and rye grass hays for two months and randomly alloted to three experimental groups and two control groups. The experimental group-1 was inoculated by stomach tube for two days with li500 ml/day of ruminal fluid fished from Korean beef cattle that had been previously adapted to a high-energy ration. The experimental group-2 was inoculated by trocalization for two days with the same ruminal fluid. The experimental group-3 was inoculated by trocalization with 1,500 ml/day of bacterial culture which contained 2$\times $10$^{9}$/m1 of Gram-negative bacteria derived from adapted luminal fluid. The two control groups were treated with normal saline solution by the same methods. All animals were fed high-energy ration that contained 80% of grain ad libitum for 30-74 days beginning on the third of the treatment. The effect of the inoculation on the adaptation was observed clinicopathologically with the following results; All of the experimental calves inoculated with the ruminal fluid or Gram-negative bacterial culture derived from adapted cattle did not show any signs of rumen acidosis or other related diseases, while most of the control calves did show diarrhea and bloat and a calf laminitis. The average daily weight gain and feed efficiency of experimental calves were slightly improved compared with control calves. Following the feeding of high-grain rational the pH of the ruminal fluid was lowered in both the experimental and control groups. However severe acidosis with the pH of below 5.0 was observed in only a control group-2. The protozoal number in ruminal fluid was markedly decreased during the high-grain feeding in both the experimental and control calves. However the decrease was mere severe in control calves compared with the experimental calves. The activation of the protozoa were completely disappeared within nine hours at the refrigerator temperature (4"C). No significant differences in heamatological and blood chemical values between the experimental and control calves were recognized. However in one control calf which showed clinically laminitis marked elevations of serum glutamic oxaloacetate transaminase and lactic dehydrogenase activities and a decrease of serum glucose level were observed. From these results it would be concluded the intraruminal transplantation of unadapted calves with the adapted ruminal fluid from cattle previously adapted to a high-energy ration prevents disease problem associated with high-grain feeding and improve weight gain and feed efficiency.ency.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.05a
• /
• pp.295-300
• /
• 2005

An analytical method for the hydroelastic vibration of a vessel composed of an upper annular plate and a lower circular plate is developed by the Rayleigh-Ritz method. The two plates are clamped along a rigid cylindrical vessel wall. It is assumed that the fluid bounded by a rigid cylindrical vessel is incompressible and non-viscous. The wet mode shape of the plates is assumed as a combination of the dry mode shapes of the plates. The fluid motion is described by using the fluid displacement potential and determined by using the compatibility conditions along the fluid interface with the plate. Minimizing the Rayleigh quotient based on the energy conservation gives an eigenvalue problem. It is found that the theoretical results can predict well the fluid-coupled natural frequencies comparing with the finite element analysis result.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.15 no.8 s.101
• /
• pp.968-974
• /
• 2005

An analytical method for the hydroelastic vibration of a vessel composed of an upper annular plate and a lower circular plate is developed by the Rayleigh-Ritz method. The two plates are clamped along a rigid cylindrical vessel wall. It is assumed that the fluid bounded by a rigid cylindrical vessel is incompressible and non-viscous. The wet mode shape of the plates is assumed as a combination of the dry mode shapes of the plates. The fluid motion is described by using the fluid displacement potential and determined by using the compatibility conditions along the fluid interface with the plate. Minimizing the Rayleigh quotient based on the energy conservation gives an eigenvalue problem. It is found that the theoretical results can predict well the fluid-coupled natural frequencies comparing with the finite element analysis result.