• Title/Summary/Keyword: Two Spheres

Search Result 145, Processing Time 0.023 seconds

Calibration of a Chirp Sonar System Using Seven Tungsten Carbide Spheres of Different Sizes (크기가 다른 7개의 탄화 텅스텐 구를 이용한 Chirp 소너 시스템의 교정)

  • Lee, Dae-Jae;Lee, Kyounghoon;Jung, Bong-Kyu;Kang, Hee-Young
    • Korean Journal of Fisheries and Aquatic Sciences
    • /
    • v.55 no.2
    • /
    • pp.207-217
    • /
    • 2022
  • The accurate calibration of broadband echo sounders is essential for providing high quality acoustic information for fisheries applications. The increased range resolution of broadband echo sounder systems improves the detection and characterization of targets near boundaries, such as fish near the seabed. Most echo sounder systems are calibrated using tungsten-carbide (WC) spheres. For accurate calibration, it is necessary to select WC spheres of optimized diameters used frequently to calibrate echo sounder systems. For these purposes, the measured and simulated target strength (TS) data for seven WC spheres of different sizes were compared across a bandwidth of 100-200 kHz. The frequency-dependent TS pattern for the specular wave measured from two WC spheres using the fractional Fourier transform was also estimated and analyzed. Comparative results are presented for all the spheres and the best average precision of 0.15 dB was obtained for the 22 mm WC sphere.

Photoluminescence Characteristics of the Light-Emitting Chromophores Obtained from Organic-Inorganic Hybrid Silica Spheres

  • Park, Eun-Hye;Jeong, Chang-Gi;Kang, Kwang-Sun
    • Current Photovoltaic Research
    • /
    • v.4 no.3
    • /
    • pp.93-97
    • /
    • 2016
  • Light-emitting chromophores have been separated from silica spheres modified the surface with 3-(trimethoxysilyl)propylmethacrylate (TMSPM). The photoluminescence characteristics of the chromophores were investigated with various excitation wavelengths. The TMSPM was attached to the surface of silica spheres at $75^{\circ}C$. Large number of round shaped particles of the TMSPM was on the surface of silica spheres after 3 h reaction. The TMPSM was completely covered on the surface of the spheres after 6 h reaction. The surface modified silica spheres were soaked into acetone and stored for 20 days at ambient condition. The solution color slowly changed from light yellow to deep yellow with the increase of the storing time. The FTIR absorption peaks at 3348, 2869, 2927, 1715, 1453/1377, 1296, and $1120cm^{-1}$ represent C-OH, $R-CH_3$, $R_2-CH_2$, -C=O, C-H, C=C-H, and Si-O-Si absorption, respectively. The FTIR absorption peak at $1715cm^{-1}$ representing the ester -C=O stretching vibration for silica spheres stored for 20 days was increased compared with the spheres without aging. The UV-visible absorption peaks were at 4.51 eV (275 nm) and 3.91 eV (317 nm). There were two luminescence peaks at 2.51 eV (495 nm) and 2.25 eV (550 nm). The emission at 2.51 eV was dominant peak when the excitation energy was higher than 2.58 eV, and emission at 2.25 eV became dominant peak when the excitation energy was lower than 2.58 eV.

Analysis of Laminar Flows around Submerged Spheres (물 밑에 잠긴 구 주위의 층류 유동장 해석)

  • Kwag, Seung-Hyun
    • Journal of Advanced Marine Engineering and Technology
    • /
    • v.34 no.8
    • /
    • pp.1094-1099
    • /
    • 2010
  • Three dimensional laminar flows are numerically simulated around the submerged spheres. The finite volume based Navier-Stokes equations with unstructured grids are solved to make clear the hydrodynamic phenomena near and far away from the body. Reviews are made on with the vorticity, velocity, dynamic pressure, residuals, drags, etc. The Reynolds numbers under consideration are 425, 300, 250 and 100. In case of small spacing between spheres, the flow is more stable than that past a single sphere. According to the analysis, the flow past two spheres is found to be unstable as the spacing becomes larger. The rear sphere shows the deduction of stagnation pressure, which results in the decrease of the resistance. The predicted drag coefficients verify that the present numerical calculation is reasonable.

EQUIARIANT K-GROUPS OF SPHERES WITH INVOLUTIONS

  • Cho, Jin-Hwan;Mikiya Masuda
    • Journal of the Korean Mathematical Society
    • /
    • v.37 no.4
    • /
    • pp.645-655
    • /
    • 2000
  • We calculate the R(G)-algebra structure on the reduced equivariant K-groups of two-dimensional spheres on which a compact Lie group G acts as a reflection. In particular, the reduced equivariant K-groups are trivial if G is abelian, which shows that the previous Y. Yang's calculation in [8] is incorrect.

  • PDF

Rate Capability of Electric Double-Layer Capacitor (EDLC) Electrodes According to Pore Length in Spherical Porous Carbons

  • Ka, Bok-H.;Yoon, Song-Hun;Oh, Seung-M.
    • Journal of the Korean Electrochemical Society
    • /
    • v.10 no.4
    • /
    • pp.252-256
    • /
    • 2007
  • A series of spherical porous carbons were prepared via resorcinol-formaldehyde (RF) sol-gel polymerization in the presence of cationic surfactant (CTAB, cetyltrimethylammonium bromide), wherein the carbon sphere size was controlled by varying the CTAB introduction time after a pre-determined period of addition reaction (termed as "pre-curing"). The sphere size gradually decreases with an increase in the pre-curing time within the range of 30-150 nm. The carbons possess two types of pores; one inside carbon spheres (intra-particle pores) and the other at the interstitial sites made by carbon spheres (inter-particle pores). Of the two, the surface exposed on the former was dominant to determine the electric double-layer capacitor (EDLC) performance of porous carbons. As the intra-particle pores were generated inside RF gel spheres by gasification, the pore diameter was similar for all these carbons, thereby the pore length turned out to be a decisive factor controlling the EDLC performance. The charge-discharge voltage profiles and complex capacitance analysis consistently illustrate that the smaller-sized RF carbons deliver a better rate capability, which must be the direct result of facilitated ion penetration into shorter pores.