• Journal of Information Display
• /
• v.10 no.4
• /
• pp.184-187
• /
• 2009

A liquid crystal device with switchable dynamic and memory modes was investigated and developed. The proposed device reveals the splay, $\pi$-twist, and bend states via selective switching among them. In the dynamic mode, the device is operated in the bend state, which exhibits a wide viewing-angle and a fast-response-time due to its self-compensated bend structure and flow-accelerated fast response time, respectively. In the memory mode, the permanent memory characteristics in the splay and $\pi$-twist sates are obtained, respectively. The switching mechanisms of the tristate device are also proposed.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.10a
• /
• pp.912-915
• /
• 2002

It has been known that general velocity and force of a rigid body in space can be described in forms of a twist and a wrench by use of screws. However, the geometrical meaning of acceleration has not been clearly disclosed. It has been a normal practice to analyze or synthesize the acceleration effect of manipulator using some complex mathematical equations, which do not represent any geometrical meanings. In other words, such a technique doesn't clearly provide information about the overall acceleration state of manipulator at that instant. In this study, the geometrical meaning of acceleration of a rigid body has been investigated and thereby a geometrical procedure which can be applied to inverse acceleration analysis of a general non-redundant manipulator is presented as an application.

• 한국전산유체공학회:학술대회논문집
• /
• 2002.05a
• /
• pp.79-87
• /
• 2002

The present work analyzed the effect of mixing vane shape on the flow structure and heat transfer downstream of mixing vane in a subchannel of fuel assembly, by obtaining velocity and pressure fields, turbulent intensity, flow-mixing factors, heat transfer coefficient and friction factor using three-dimensional RANS analysis. NJl5, NJ25, NJ35, NJ45, which were designed by the authors, were tested to evaluate the performances in enhancing the heat transfer. Standard $\kappa-\epsilon$ model is used as a turbulence closure model, and, periodic and symmetry conditions are set as boundary conditions. The flow blockage ratio is kept constant, but the twist angle of mixing vane is changed. The results with three turbulence models( $\kappa-\epsilon$, $\kappa-\omega$, RSM) were compared with experimental data.

• International Journal of Advanced Culture Technology
• /
• v.8 no.2
• /
• pp.159-164
• /
• 2020

The response analysis of frame structure with open section beams considering warping conditions and short duration load have been performed. When a beam of frame structure is subjected under torsional moment, the cross section will deform a warping as well as twist. For some thin-walled sections warping will be large, and accompanying warping restraint will induce axial and shear stresses and reduce the twist of beam which stiffens the beam in torsion. Because of impact or blast loads, the wave propagation effects become increasingly important as load duration decreases. This paper presents that a warping restraint in finite element model effects the behavior of beam deformation, dynamic mode shape and response analysis. The computer modelling of frame is discussed in linear beam element model and linear thin shell element model, also presents a correlation between computer predicted and actual experimental results for static deflection, natural frequencies and mode shapes of frame. A method to estimate the number of normal modes that are important is discussed.

• Proceedings of the Korean Fiber Society Conference
• /
• 1991.06b
• /
• pp.75-75
• /
• 1991

• Proceedings of the Optical Society of Korea Conference
• /
• 2008.07a
• /
• pp.137-138
• /
• 2008

• Structural Engineering and Mechanics
• /
• v.35 no.2
• /
• pp.141-173
• /
• 2010

In this paper a boundary element method is developed for the general flexural-torsional buckling analysis of Timoshenko beams of arbitrarily shaped cross section. The beam is subjected to a compressive centrally applied concentrated axial load together with arbitrarily axial, transverse and torsional distributed loading, while its edges are restrained by the most general linear boundary conditions. The resulting boundary value problem, described by three coupled ordinary differential equations, is solved employing a boundary integral equation approach. All basic equations are formulated with respect to the principal shear axes coordinate system, which does not coincide with the principal bending one in a nonsymmetric cross section. To account for shear deformations, the concept of shear deformation coefficients is used. Six coupled boundary value problems are formulated with respect to the transverse displacements, to the angle of twist, to the primary warping function and to two stress functions and solved using the Analog Equation Method, a BEM based method. Several beams are analysed to illustrate the method and demonstrate its efficiency and wherever possible its accuracy. The range of applicability of the thin-walled theory and the significant influence of the boundary conditions and the shear deformation effect on the buckling load are investigated through examples with great practical interest.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.28 no.11
• /
• pp.1516-1523
• /
• 2004

The purpose of this study were to analyze the effect of weft knit structural characteristics on the subjective texture and sensibility. For this, the material was knitted into 8 kinds of weft plain knit fabrics with four kinds of fiber components such as wool, acryl, rayon, and nylon, 3 steps of densities and 3 steps of twist numbers to ply two yarns. The data were analyzed by factor analysis, ANOVA and multidimensional scaling. From factor analysis, subjective textures were categorized as 'bulk/resilience', 'surface/density' and 'soft/drape', and subjective sensibilities were categorized as 'natural/comfortable', 'feminine/elegance' and 'stable/neat' Among the knit structural characteristics, the component of fibers and the density of fabrics were the important factors to give variations in texture and sensibility : In comparison with wool knit of medium density, the knit fabrics of other components and different densities each showed a unique texture and sensibility. But twist number to ply two yams had a few influence on subjective properties. As a result of MDS analysis, the texture and sensibility of plain weft knit fabrics was classified as 'thin-full', 'hard-soft', 'young-old' and 'warm-cool'.

• Journal of Welding and Joining
• /
• v.20 no.5
• /
• pp.93-98
• /
• 2002

The effect of bonding misfit on single crystallization of transient liquid phase (TLP) bonded joints of single crystal superalloy CMSX-2 was investigated using MBF-80 insert metal. The bonding misfit was defined by (100) twist angle (rotating angle) at bonded interface. TLP bonding of specimens was carried out at 1523K for 1.8ks in vacuum. The post-bond heat treatment consisted of the solution and sequential two step aging treatment was conducted in the Ar atmosphere. The crystallographic orientation analysis across the TLP bonded joints was conducted three dimensionally using the electron back scattering pattern (EBSP) method. EBSP analyses f3r the bonded and post bonded heat treated specimens were conducted. All bonded joints had misorientation centering around the bonded interface for as-bonded and post-bond heat treated specimens with rotating angle. The average misorientation angle between both solid phases in bonded interlayer was almost identical to the rotating angle at bonded interface. HRTEM observation revealed that the atom arrangement of both solid phases in bonded interlayer was quite different across the bonded interface. It followed that grain boundary was formed in bonded interface. It was confirmed that epitaxial growth of the solid phase occurred from the base metal substrates during TLP bonding and single crystallization could not be achieved in joints with rotating angle.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.9 no.11
• /
• pp.1227-1232
• /
• 2014

This paper relates 10% shrink from $0.13{\mu}m$ design for core devices as well as input and output (I/O) devices different from previous poly length shrink size only. We analyzed body effect with different channel length and doping profile simulation. After fixing the gate oxide module process, LDD implant conditions were optimized such as decoupled plasma nitridation of gate oxide, TEOS oxide $100{\AA}$ before LDD implant and 22o tilt-angle(45o twist-angle) LDD implant respectively to match the spice DC parameters of pre-shrink and finally matched them within 5%.