• Progress in Medical Physics
• /
• v.17 no.3
• /
• pp.153-158
• /
• 2006

The purpose of this study was to improve the technique so as to develop an advanced sensitive RF surface coil for investigating the sensitivities of the multi-spiral surface coils, and we eventually wanted to achieve high resolution of the microscopic MR images and MR spectra. The magnetic field inhomogeneity and shape of a surface coil were statistically estimated by simulation of the magnetic field distribution. On the basis of the experimental results with single, 3 and S-turned spiral RF surface coils, we found that the 3-turned coil had the highest sensitivity. The present study showed that the sensitivity of the RF surface coil was improved by increasing the number of spiral coil turns, and also the SNR of the RF surface coil was dependent upon the number of spiral coil turns. However, we found, rather strikingly, that the sensitivity of excessive turns of the coils was decreased due to the rise of the coil's Impedance. Thus, the present results demonstrated that the sensitivity was not proportional to the number of a spiral RF coil's turns, and the number of spiral coil turns should be optimized for obtaining the highest sensitivity and SNR.

• Journal of Korean Society of Transportation
• /
• v.21 no.2
• /
• pp.107-118
• /
• 2003

Highway Capacity Manual (HCM) provides an analytical delay estimation model to assist the evaluation of traffic at a signalized intersection. The model revised and included in the HCM published in the year 2000 reflects the results of recent studies and is utilized in various fields of transportation studies. For the implementation of the model in the case of permitted left turns, the HCM supplement provides a computational procedure to adjust the saturation flow rate of permitted left toms. The model however, is originally designed for a protected movement and thus underestimates the delay of permitted left turns due to its difference right-of-way nature. This document describes (1) a review of the theoretical background of the HCM delay estimation model, (2) problems embedded in the model for the delay estimation of permitted left turns, (3) a proposed model developed in this study to improve the delay estimation for permitted left turns and (4) a set of verification tests. In order to reflect various traffic and control conditions in the test, simulation studies were performed to by using the field data based on 120 different permitted left-turn scenarios. Comparison studies conducted between sets of delays estimated by the HCM and the proposed models against a set of the CORSIM delays and showed that the proposed model improved the estimation of the permitted left-turn delays. The explanatory variable of the relationship between the HCM delay and the simulation delay was 0.47 and the one between the delay estimated by the proposed model and the simulation delay was 0.77.

• Journal of the Korean association of regional geographers
• /
• v.21 no.2
• /
• pp.207-225
• /
• 2015

This study attempts to explore settlement and adaptation status involved in differing urban-to-rural migration types in Gyeongbuk Province and suggests policy implications based on this analysis. The attributes of urban-to-rural migrants in Gyeongbuk Province differ spatio-temporally, and their status of settlement and adaptation is also different depending on urban-to-rural migration types. "U-turn" migrants who are mostly first-generation rural-to-urban migrants with experience in farming and rural community life engage primarily in crop agriculture. "J-turns" and "I-turns," who have no experience in farming or rural community life, migrated for idyllic rural life. The household income of these types is relatively low compared to U-turn type. U-turns' degree of adaptation is relatively lower than the other types, and U-turn migrants mainly rely on family and community assets in order to solve problems. J-turns' and I-turns' degree of satisfaction is relatively high. However they typically have substantial difficulties in adapting due to lack of pre-migration preparation. Policy implications are : 'switching away from general and inclusive policies of support,' 'transition to policies embedded in the attributes of regions and migration types,' 'improvement of policy governance,' 'enhancement of support for pre-migration preparation and customized support based on the needs of migrants,' and 'comprehensive improvements of settlement environment to better integrate migrants with current residents.'.

• Proceedings of the IEEK Conference
• /
• 2000.11a
• /
• pp.117-120
• /
• 2000

This paper discusses solutions for forward link power allocation based on 3GPP(FDD) standardization reports and which meet the required Eb/No of forward link channels. In addition, the forward link user capacity in a mixed service environment. Cell coverage is induced from the user capacity solutions using the urban propagation model. In an urban macrocell environment, the forward link user capacity turns out to be roughly 29 and 3, respectively, for voice and data service (144 kbps) at a distance of 1 km, and in an urban microcell environment, the user capacity turns out to be Toughly 14, 4, and 2, respectively, for voice and two data services (144 kbps, 384 kbps) when the cell radius is 0.2 km.

• Proceedings of the KIEE Conference
• /
• 2008.09a
• /
• pp.199-202
• /
• 2008

In this paper, we studied a accuracy for CT using elastic epoxy. According to industry development, the quality where also the electric material is various is demanded. Insulation material is widely used because epoxy is superior to electrical and mechanical property. Until now, the possibility where the crack will occur is high because epoxy used to electrical products had high hardness. If thermal expansion is different of two material, contraction of epoxy heavily transformed turns ratio of CT Elastic epoxy absorbed in expansion and contraction of substance material by temperature. So we could design more exacted CT We had elastic test of elastic epoxy and made CT using elastic epoxy. At the result, We obtained turns ratio of within 4% superior to existing CT.

• Proceedings of the KIPE Conference
• /
• 2007.11a
• /
• pp.112-114
• /
• 2007

The voltage stress on line-end coil of the stator winding in the induction motor fed by a PWM inverter is analyzed, using the computer model based on multi-conductors transmission line. A method to calculate circuit parameters, especially, capacitance between the turns and ground is proposed. The voltage distributions inside coil at motor terminal depending on dv/dt are investigated through simulation studies.

• Journal of applied mathematics & informatics
• /
• v.28 no.1_2
• /
• pp.99-107
• /
• 2010

This paper is a study about the relationships among topologies and intuitionistic fuzzy topology induced, respectively, by approximation operators and an intuitionistic fuzzy approximation operator associated with an approximation space (X, R), when the relation R on X is precisely reflexive and transitive. In particular, we consider an intuitionistic fuzzy approximation operator on an approximation space X (i.e., a set X with a reflexive and transitive relation on it), which turns out to be an intuitionistic fuzzy closure operator. This intuitionistic fuzzy closure operator gives rise to two saturated fuzzy topologies on X and it turns out that all the level topologies of one of the fuzzy topology coincide and equal to the topology analogously induced on X by a crisp approximation operator. These observations are then applied to intuitionistic fuzzy automata.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.1 no.1
• /
• pp.101-109
• /
• 1993

Dynamic characteristics of an electro-magnetic clutch transmission system were investigated by using Bondgraph modeling method. Simulation results showed that when the rotor engaged with the armature, the response time of the current, the driver torque, the rotational speed and the relative sliding time between the driver and the driven side decreased, as the gap size between the rotor and the armature decreased and the number of coil turns increased. Also, when the rotor disengaged with the armature, the delay time increased with the decreased gap size and the increased number of coil turns. It was found that the experimental results of the current, the driver torque, the rotational speeds were in good accordance with the theoretical results. The results of this study can be used as basic design materials of the electro-magnetic clutch.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.1
• /
• pp.66-70
• /
• 2007

For the design to prevent the saturation of the iron core and the effective fault current limitation, the analysis for the operation of the flux-lock type superconducting fault current limiter (SFCL) with consideration for the hysteresis characteristics of the iron core is required. In this paper, the hysteresis characteristics of the flux-lock reactor, which is an essential component of the flux-lock type SFCL, were investigated. Under normal condition, the hysteresis loss of the iron core in the flux-lock type SFCL does not happen due to its winding structure. From the equivalent circuit for the flux-lock type SFCL and the fault current limiting experiments, the hysteresis curves could be drawn. From the analysis for both the hysteresis curves and the fault current limiting characteristics due to the number of turns for the 1st and 2nd windings, the increase of the number of turns in the 2nd winding of the flux-lock type SFCL had a role to prevent the iron core from saturation.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.19 no.2
• /
• pp.200-206
• /
• 2006

An electric power efficiency of electrodeless fluorescent lamp depens on a big relative property of gas, gas pressure, lamp formation, ingredients of magnetic substance and shape and action frequency etc. in lamp. We used magnetic substance that opens self-examination material of electrodeless fluorescent lamp antenna. We used Mn-Zn type as the Ferrite. We have examined resistance, impedance and Q-factor's frequency characteristic by ferrite. Coil turns were changed from 13 to 15 turns to recognize brightness change of lamp by winding number. Optical equipment (LS-100) was used to measure brightness. We could know Q-factor's difference according to material is important part of antenna design. When an electrodeless fluorescent lamp was made using T company's PE22, it showed the highest brightness. As number of winding is increased the brightness increased, and starting characteristic became good.