• Journal of ILASS-Korea
• /
• v.10 no.2
• /
• pp.32-40
• /
• 2005

This paper presents the analytical approaches to predict cutting fluid aerosol formation characteristics in machining process. The prediction model which is based on the rotary atomization theory analyzes aerosol behaviors in terms of size and concentration. Experiments were tarried out to verify the aerosol formation prediction model under various operational conditions. The experimental results which are obtained by Dual-PDA measurement show resonable agreement with prediction results of aerosol concentration. This study can be provided as a basis to estimate and control the hazardous cutting fluid aerosol in machining process in view of environmental consciousness.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.3
• /
• pp.125-132
• /
• 2003

The joint method and characteristics of MC nylon and metal are analyzed. Considering the productivity and economics, two materials are joined with the process of turning, knurling, and induction heating. The joint strength is determined by adhesion of the melted nylon, the size of knurl, and the interference from the difference of the diameters. The adhesion strength of the melted nylon is measured. The effects of the knurl size and diameter difference are analyzed with the statistical methods. Finally the joint strength is analyzed in the environments of low, room, and high temperature. Based on this study, the nylon/metal material is expected to be widely used as the sliding machine elements with good lubrication and strength properties.

• Journal of the Korean Society for Precision Engineering
• /
• v.14 no.7
• /
• pp.22-28
• /
• 1997

In this paper, We have studied internal quality incluiding chemical compositions, microscopic structure and nonmetalic inclusion of test material. We have analyzed dynamic characteristics of cutting resistence and compared chip treatment of the test material. In analyzing internal quality, all of the test material have typical ferrite+pearlite structure. But, nonmetallic inclusion has oxide and sulfide inclusion has oxide and sulfide inclusion in medium carbon steel, mainly sulfide inclusion is existed in S-free cutting steel. In Ca+S-free cutting steel, calcium aluminate and sulfide complex inclusion, had low-melting point, as deformation of sulfide and oxide inclusion is existed. Machining characteristics, cutting resistence is maximum in medium carbon steel. Chip treatement are excellent in S-free cutting steel, similar to the Ca+S free cutting steel and medium carbon steel.

• Korean Institute of Interior Design Journal
• /
• no.40
• /
• pp.42-51
• /
• 2003

This study aimed at understanding the spatial characteristics in the Tugendhat house. For this study, it is need to analyze the early plans of the Tugendhat house design process. To analyze this, the study leads to how to effect on the real practice with the process. Therefore, this research investigates the conceptional design process of the house. There are 2 main characteristics of the interior space alternation. One is the closed spatial character on the 2nd floor, the other is the open spatial character on the 1st floor. It clearly shows the severance between interior and exterior on the 2nd floor. Each 2nd floor's space volume uses different materials so that each the space can show the individuality. On the 1st floor, however, it seems the interior is not as much open to the exterior, because the materiality and reflection of the glass, the objet of furniture and wall. In case of 1st floor, it has a complex concept as open and close character, because it is using the proper gardening elements and the relationship between the house and site. The exterior characteristic is separated the house from the ground with the podium and the slope, and this leads to have the discontinuity. The house clearly shows the spatial characteristics of the continuity and discontinuity, it proves that Mies tried to move onto modem architecture as a turning point.

• Journal of Fashion Business
• /
• v.6 no.6
• /
• pp.43-55
• /
• 2002

This study intends to consider the characteristics of Tudorian costume and find out how the thoughts and cultures in those days had influences on the costume trends of low and middle class. In terms of the Tudorian costume which generated new cultural mainstreams along with blossomed civil culture, this study focuses on the characteristics and trends of costume at low and middle class, which have been little addressed in studies on western costume history or related fields, turning from the costume of upper class based on wealthy noblemen who showed off its dignity and authority along with jewelry and gorgeous ornamental craftsmanship. This study used related pictures, museum material and other literatures as its reference. It first looked into the general characteristics of western costume and considered the characteristics of costumes popularized in professionals at middle class such as apprentice, yeomen and low-class people. Professional or other middle class almost typically used to wear tunic, doublet, shirts, coat or long gown. Black was mainly used as clothes color. Similarly to upper class, silk or velvet was very often used as material. People at low class enjoyed wear costumes with simple and easy style for working. They also preferred natural color and cotton or wool as material. This study intended to find out which type of costumes people at low and middle class enjoyed wearing, rather than compare costume between such two classes.

• Journal of the Korean Home Economics Association
• /
• v.34 no.2
• /
• pp.183-199
• /
• 1996

The objective of this study was to provide fundamental data on somatotype for elderly women by classifying the somatotype and analysing the 3 characteristics of their somatotype. The subject were 368 women of 60~84 years old, they were analyzed indirect photography. To find out differences among the age groups, the 368 subjects were grouped into two age groups (Group 1 ; age 60 to 69, Group 2 ; aged 70 to 84). Data were analyzed using Factor analysis, Cluster analysis, duncan test and Analysis of variance. Through the factor analysis, 27 items from photometric measurements respectively. Cluster analysis was applied for classification of somatotype. The results of this study were as follows. 1. The characteristics of Elderly women's somatotype were bending of the upper-torso, fatness of the waist and abdomen, drooping of the bust and shoulder and hip. In addition, height, girth, depth and width items were decreased in their sizes respectively. 2. The characteristics of clusters were as follows. Type 1 was straight somatotype in which the plumb line through tragion, the bust depth and under bust depth region laterally. Type 2 was swayback somatotype in which the upper portion of protruding point on the back was bent forward but the lower portion of protruding point had a characteristics of turning over somatotype. Type 3 was bending somatotype. Namely, this type was shorter than average and below the average fatness. Generally, the lateral view silhouette of elderly women was the straight type and changed into bending type as the age increases.

• Journal of the Korean housing association
• /
• v.20 no.6
• /
• pp.157-165
• /
• 2009

The aim of this study on the Munich Olympic Park is to understand the characteristics and design techniques of the environmental design of G$\ddot{u}$nther Behnisch's architecture. This particular work is chosen because it represents a turning point in his architectural life in terms of his approach to environmental design. The goal of this paper is to research Behnisch's design techniques in order to realiz a way to apply nature-friendly design in contemporary-architecture. In Behnisch's architectural works, the organic design philosophies of Hugo H$\ddot{a}$ring and Hans Scharoun are clealy echoed. The site and natural surroundings are always important in his architecture. In terms of his environmentally-friendly approach, Behnisch's architecture can be defined as one which espresses a harmony between architecture and the naturale-surroundings. In terms of the structural aspect, Behnisch's architectural forms are not imposing, but rather waiting to be discovered naturally. In terms of spatial characteristics, Behnisch's spaces are based on organic characteristics and have a strong relationship between the outside and inside. In particular, the artificial architectural landscape in the Munich Olympic Park through cable-construction connects perfectly with nature.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.26 no.9
• /
• pp.1249-1259
• /
• 2002

The present study investigates the convective heat/mass transfer inside a cooling passage of rotating gas-turbine blades. The rotating duct has various configurations made of ribs with 70。 attack angle, which are attached on leading and trailing surfaces. A naphthalene sublimation technique is employed to determine detailed local heat transfer coefficients using the heat and mass transfer analogy. The present experiments employ two-surface heating conditions in the rotating duct because the surfaces, exposed to hot gas stream, are pressure and suction side surfaces in the middle passages of an actual gas-turbine blade. In the stationary conditions, the parallel rib arrangement presents higher heat/mass transfer characteristics in the first pass, however, these characteristics disappear in the second pass due to the turning effects. In the rotating conditions, the cross rib present less heat/mass transfer discrepancy between the leading and the trailing surfaces in the first pass. In the second pass, the heat/mass transfer characteristics are much more complex due to the combined effects of the angled ribs, the sharp fuming and the rotation.

• International journal of advanced smart convergence
• /
• v.8 no.4
• /
• pp.138-146
• /
• 2019

In this paper, we proposed a soft-switched synchronous buck converter, which can perform charging the battery. The proposed converter has low switching loss even at high frequency operation due to its soft switching characteristics. The converter operates in synchronous mode to minimize conduction loss, resulting in small conduction loss, also. In this reason, the efficiency of the converter can be greatly improved even in high frequency. The size and weight of the converter can be reduced by high frequency operation of the converter. In this paper, we designed a battery charger with a switching frequency of 100 kHz. The designed converter also simulated to prove the converter's characteristics of synchronous operation as well as soft switching operation. The simulation shows that the proposed converter always meets the soft switching conditions of turning on and off switching in the zero voltage and zero current states. Therefore, simulation results have confirmed that the proposed battery charger had soft switching characteristics. The simulation results for transient response to charge current for the designed converter show that the converter responds to charge current commands quickly within 0.05 ms.

• Textile Coloration and Finishing
• /
• v.27 no.4
• /
• pp.245-260
• /
• 2015

The effect of salt milling process on the crystal size, morphology, and color characteristics of C.I. Pigment Red 57:1 was studied. The primitive morphology and color properties of the pigment after synthesis were studied in the former series work. The size and morphology of primary particles and the second aggregation features should be considered because they are very important to determine pigment quality. We compared the primary morphology of pigment particles before drying with the secondary aggregated morphology of pigment particles after drying and salt milling process. Morphological properties were investigated by particle size analysis, X-ray diffraction, and scanning electron microscopy and color measurement was carried out. Significant reduction in particle size as well as enhanced crystallite size after salt milling process was observed. This result might give a difference in color of the pigment, turning into brighter and more blue-toned red color. It was revealed that synthesis condition affect the morphology and color of the pigment even after milling. Increase in HCl concentration in the synthesis process enhanced crystal size and quality forming bluer-red pigments but an increase in $CaCl_2$ concentration resulted in more amorphous crystals forming darker-red pigments after salt milling.