• 한국전산구조공학회논문집
• /
• 제27권4호
• /
• pp.273-279
• /
• 2014

본 논문에서는 난류 강도가 풍력발전기 후류에 미치는 영향을 살펴보기 위하여 축소된 풍력발전기 모델을 이용하여 풍동실험을 수행하였다. 실험 결과 측정 위치에 따라 풍력발전기가 가지는 특성에 따라 후류의 형태가 달라지며, 난류 강도에 따른 영향이 반드시 고려되어야 하는 것으로 나타났다. 난류 강도만을 일부 고려한 격자 난류 조건에서 등류 조건보다 기존의 후류 모델과 보다 더 잘 일치하는 경향을 보이고 있으며, 측정된 난류 강도 값을 바탕으로 수정된 후류 모델을 제안하였다. 향후 다양한 난류 특성이 고려된 합리적인 모델이 필요하다고 판단된다.

• Wind and Structures
• /
• 제13권3호
• /
• pp.275-292
• /
• 2010

Wind tunnel experiments were conducted to investigate the wind characteristics in the mountainous valley terrain with 4 simplified valley models and a 1:500 scale model of an existing valley terrain in the simulated atmospheric neutral boundary layer model. Measurements were focused on the mean wind flow and longitudinal turbulence intensity. The relationship between hillside slopes and the velocity speed-up effect were studied. By comparing the preliminary results obtained from the simplified valley model tests and the existing terrain model test, some fundamental information was obtained. The measured results indicate that it is inappropriate to describe the mean wind velocity profiles by a power law using the same roughness exponent along the span wise direction in the mountainous valley terrain. The speed-up effect and the significant change in wind direction of the mean flow were observed, which provide the information necessary for determining the design wind speed such as for a long-span bridge across the valley. The longitudinal turbulence intensity near the ground level is reduced due to the speed-up effect of the valley terrain. However, the local topographic features of a more complicated valley terrain may cause significant perturbation to the general wind field characteristics in the valley.

• 한국해양공학회지
• /
• 제35권2호
• /
• pp.121-130
• /
• 2021

In this study, a computational fluid dynamics (CFD) simulation based on an Eulerian-Eulerian approach was used to evaluate the mixing performance of a mud agitator through the distribution of bulk particles. Firstly, the commercial CFD software Star-CCM+ was verified by performing numerical simulations of single-phase water mixing problems in an agitator with various turbulence models, and the simulation results were compared with an experiment. The standard model was selected as an appropriate turbulence model, and a grid convergence test was performed. Then, a simulation of the liquid-solid multi-phase mixing in an agitator was simulated with different multi-phase interaction models, and lift and drag models were selected. In the case of the lift model, the results were not significantly affected, but Syamlal and O'Brien's drag model showed more reasonable results with respect to the experiment. Finally, with the properly determined simulation conditions, a multi-phase flow simulation of a mud agitator was performed to predict the mixing time and spatial distribution of solid particles. The applicability of the CFD multi-phase simulation for the practical design of a mud agitator was confirmed.

• Wind and Structures
• /
• 제28권4호
• /
• pp.239-253
• /
• 2019

Accurate numericalsimulation of wind field over complex terrain is an important prerequisite for wind resource assessment. In this study, numerical simulation of wind field over complex terrain was further carried out by taking the complex terrain around Siu Ho Wan station in Hong Kong as an example. By artificially expanding the original digital model data, Gambit and ICEM CFD software were used to create high-precision complex terrain model with high-quality meshing. The equilibrium atmospheric boundary layer simulation based on RANS turbulence model was carried out in a flat terrain domain, and the approximate inflow boundary conditions for the wind field simulation over complex terrain were established. Based on this, numerical simulations of wind field over complex terrain under different inflow wind directions were carried out. The numerical results were compared with the wind tunnel test and field measurement data for land and sea fetches. The results show that the numerical results are in good agreement with the wind tunnel data and the field measurement data which can verify the accuracy and reliability of the numerical simulation. The near ground wind field over complex terrain is complex and affected obviously by the terrain, and the wind field characteristics should be fully understood by numerical simulation when carrying out engineering application on it.

• Wind and Structures
• /
• 제30권6호
• /
• pp.547-558
• /
• 2020

With the development of economy and construction technology, more and more bridges are built in complex mountainous areas. Accurate assessment of wind parameters is important in bridge construction at complex terrain. In order to investigate the wind characteristics in the high-altitude difference area, a complex mountain terrain model with the scale of 1:2000 was built. By using the method of wind tunnel tests, the study of wind characteristics including mean wind characteristics and turbulence characteristics was carried out. The results show: The wind direction is affected significant by the topography, the dominant wind direction is usually parallel to the river. Due to the sheltering effect of the mountain near the bridge, the wind speed and wind attack angle along the bridge are both uneven which is different from that at flat terrain. In addition, different from flat terrain, the wind attack angle is mostly negative. The wind profiles obey exponential law and logarithmic law. And the fitting coefficient is consistent with the code which means that it is feasible to use the method of wind tunnel test to simulate complex terrain. As for turbulence characteristics, the turbulence intensity is also related to the topography. Increases sheltering effect of mountain increases the degree of breaking up the large-scale vortices, thereby increasing the turbulence intensity. Also, the value of turbulence intensity ratio is different from the recommended values in the code. The conclusions of this study can provide basis for further wind resistance design of the bridge.

• 항공우주기술
• /
• 제13권1호
• /
• pp.63-69
• /
• 2014

다단연소사이클 로켓엔진 개발의 일환으로 산화제 과잉 예연소기의 단독 연소시험이 수행되었다. 산화제 과잉 연소라는 특성상 비교적 투명한 상태의 후류를 볼 수 있었고, 예연소기 연소시험 중 배출되는 화염을 일반 캠코더와 열화상 캠코더를 이용하여 촬영하였으며, 이를 통해 화염의 형태와 온도분포 등을 관찰할 수 있었다. 배기 플룸 구조와 특성을 좀 더 명확히 파악하기 위하여 열유동 수치해석이 함께 수행하였다. 연소는 고려하지 않았으며, 배기가스와 주변공기의 혼합은 화학종 수송 모델을 사용하였고, 서로 다른 난류 모델을 적용하여 해석을 수행하였다. 시험과 해석 결과를 비교함으로서 플룸의 내부구조를 파악하였고, 적용된 해석모델의 타당성을 검증할 수 있었다.

• 한국항공우주학회지
• /
• 제32권8호
• /
• pp.118-128
• /
• 2004

화염에 의한 종방향 공력 특성의 변화를 해석하기 위하여 고형 화염 모형을 이용한 풍동 시험과 고형 화염 모형과 제트 화염 모델을 이용한 난류 유동 수치 해석을 실시하였다. 화염 경계면 근사 가법을 이용하여 산출한 형상을 본떠 화염 모형을 제작하였으며 제트 화염 모델링 기법을 이용하여 공기와 실제 화염의 열역학적 차이로 인한 오차를 보정한 공기 제트 화염을 생생하였다. 화염과 외부 공기의 간섭에 대해 난류 모델간의 비교를 통하여 정확도와 격자 의존성 등에서 Spalart-Allmaras 모델이 좋은 결과를 주었다. 수치 해석을 통하여 고형 화염 모형과 제트 화염의 차이를 분석하였으며, 실제 비행 시험에 대한 화염 영향을 분석하기 위하여 연소실과 대기 압력 비와 레이놀즈수에 따른 변화를 해석하였다.

• Ocean Systems Engineering
• /
• 제4권3호
• /
• pp.185-200
• /
• 2014

The objective of the present simulations is to evaluate the applicability of the standard $k-{\varepsilon}$ turbulence model in engineering practice in the subcritical to supercritical flow regimes. Two-dimensional numerical simulations of flow around a circular cylinder at $Re=1{\times}10^5$, $5{\times}10^5$ and $1{\times}10^6$, had been performed using Unsteady Reynolds-Averaged Navier Stokes (URANS) equations with the standard $k-{\varepsilon}$ turbulence model. Solution verification had been studied by evaluating grid and time step size convergence. For each Reynolds number, several meshes with different grid and time step size resolutions were chosen to calculate the hydrodynamic quantities such as the time-averaged drag coefficient, root-mean square value of lift coefficient, Strouhal number, the coefficient of pressure on the downstream point of the cylinder, the separation angle. By comparing the values of these quantities of adjacent grid or time step size resolutions, convergence study has been performed. Solution validation is obtained by comparing the converged results with published numerical and experimental data. The deviations of the values of present simulated quantities from those corresponding experimental data become smaller as Reynolds numbers increases from $1{\times}10^5$ to $1{\times}10^6$. This may show that the standard $k-{\varepsilon}$ model with enhanced wall treatment appears to be applicable for higher Reynolds number turbulence flow.

• Current Optics and Photonics
• /
• 제4권1호
• /
• pp.1-8
• /
• 2020

We research a system of compressed-sensing computational ghost imaging (CSCGI) based on the intensity fluctuation brought by turbulence. In this system, we used the gamma-gamma intensity-fluctuation model, which is commonly used in transmission systems, to simulate the CSCGI system. By setting proper values of the parameters such as transmission distance, refractive-index structure parameter, and sampling rates, the peak signal-to-noise ratio (PSNR) performance and bit-error rate (BER) performance are obtained to evaluate the imaging quality, which provides a theoretical model to further research the ghost-imaging algorithm.

• 한국항공우주학회지
• /
• 제34권4호
• /
• pp.53-62
• /
• 2006

초음속 주 유동으로의 수직분사에 의해 생성되는 2차원 정상상태 유동장에 대한 수치모사를 수행하였다. 난류효과를 위해서 무차원 벽면거리($y^+$)를 고려한 2방정식 k-${\omega}$ SST 모델을 사용하였다. 또한 격자계에 따른 오차범위를 나타내는 방법으로 GCI(Gird Convergence Index)를 사용하여 해의 수렴성을 측정하였다. 표면 압력분포, 박리거리, 침투높이 등에 대해 실험결과 및 다른 난류모델을 이용한 결과들과 비교하였다. k-${\omega}$ SST 난류모델은 낮은 압력비에 대해서 표면 압력분포 및 박리거리 등을 정확하게 예측하였다. 그러나 압력비가 증가함에 따라 수치적 예측이 실험결과와 차이를 보이고 있다. 상기한 모든 결과는 격자계에 따른 해의 수렴성의 오차범위 1% 이내에서 측정되었다.