• Transactions of the Korean Society of Automotive Engineers
• /
• v.22 no.4
• /
• pp.145-151
• /
• 2014

Modern vehicle has a lot of ECU(Electronic Control Unit) products to control many parts such as engine, transmission, brake, body and so on. ECU quality is one of important factors related to vehicle quality and driver's safety. Based on Bath-tub curve which presents failure rate during product lifetime, we designed and applied Accelerated Run-in Test into manufacturing line by simulating stress amount to ECU and developing the required software and efficient test equipment for mass production. This test makes ECU products stressed through electrical and thermal stresses under excessive driving condition, which induce potential initial failure of components in the ECU during production. The outcome until these days proved that Acceleration Run-in Test have reduced initial failure rates and increased quality of ECU products in the field outstandingly.

• Journal of the Korean Society for Railway
• /
• v.2 no.4
• /
• pp.20-31
• /
• 1999

When a foundation on the ground with tunnel is constructed, the ultimate bearing capacity of a footing is reduced by tunnel. In practice, structure may bate a considerable damage because of large settlement. This study shows that the settlement which is caused by variety of the ultimated bearing capacity leads fatal damages to the footing above tunnel. Therefore, it is necessary to study on the reduction both of the ultimate bearing capacity which leads a failure and of tolerable settlement which satisfies the safety of the building. For this reason, the variety of ultimated bearing capacity was analyzed using tub-dimensional elasto-plastic finite difference method in this paper. As a result, bearing capacity of the foundation above tunnel should be determined after establishing limit of allowable settlement and considering reduction-ratio of bearing capacity.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.7 no.1
• /
• pp.13-19
• /
• 1995

An experimental investigation has been made for flow in a circular cylinder with a rotating bottom disk. Flow system considered in this paper is a characteristic model of interior flows of an electric washing machine. Flows in a tub of an electric washing machine are driven by a rotating bottom disk called a pulsator. The simple and characteristic model was composed of a circular cylinder with impulsively rotating endwall disk and a viscous fluid in it. Rotational motion of the pulsator is periodic and alternative in rotation direction. The flow field in the interior region is governed by a horizontal boundary layer forms on the impulsively rotating disk. Experimental approach was accomplished by adopting an image processing technique for velocity measurements. Comprehensive details of the flow structure are presented. Also a meridional circulation is obtained by tracking image particles suspended in the fluid. Flow structure and data are successfully procured for this complex rotating flow field.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2003.10a
• /
• pp.47-54
• /
• 2003

The rotating of rotatory unit with its structural unbalance mass and laundry is making the main vibration problem in a vertical axis washing machine. For reducing vibration problem total washing system hung on the case by its suspension system which is constitute of spring, damper and suspension bar and hydraulic balancer is attached at the upper rim of spin basket. In this paper, we make the dynamic model of washing system of its rigid body motions by 6 degree of freedoms. Hydraulic balancer is modeled by one degree of freedom like auto ball balancer. Elastic motions of washing system have found by method of analytic, experimental and FEM. And we consider first bending mode of each suspension bar and first circumferential mode of assy tub. So, the total washing system is modeled by 12 degree of freedoms. Equations of motion for total washing system have derived, and we perform the dynamic simulation tests.

• Journal of Institute of Control, Robotics and Systems
• /
• v.6 no.1
• /
• pp.112-119
• /
• 2000

A die-casting junction method is usually used to manufacture the tub of an IH(induction heating) jar. If there is a very small air bubble in the junction area, the thermal conductivity is deteriorated and local overheat occurs. Such problem brings serious inferiority of the IH jar. In this paper, we propose a new method to detect such defect with simply measured thermal data. Thermal distribution of preheated tubs is obtained by scanning with infrared thermal sensors and analyzed with the statistic pattern recognition method. By defining the characteristic feature as the temperature difference between sensors and using ellipsoid function as decision boundary, a supervised learning method of genetic algorithm is proposed to obtain the required parpameters. After applying the proposed method to experiment, we have proved that the rate of recognition is high even for a small number of data set.

• Journal of the Korea Safety Management & Science
• /
• v.13 no.2
• /
• pp.211-217
• /
• 2011

The government has been operating the long-term care insurance since 2008. In June 2010, the government manual wheelchairs, electric beds, manual beds, mattresses prevent pressure ulcers, mobile tub, bath lifts, including six items were changed to rental-only item. For the successful settlement of welfare equipment rental system, The efforts to prevent inconvenience of welfare equipment user's and improvement of the system for the activation is needed. The main object of this study is to identify the factors affecting satisfaction of welfare equipment rental and seek to proposals of revitalizing equipment rental system.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.07a
• /
• pp.201-202
• /
• 2005

The electrical characteristics of high-voltage LDMOSFET (Lateral Double-diffused MOSFET) fabricated by a CMOS technology were investigated depending on the process and design parameters. The off-state breakdown voltages of n-channel LDMOSFETs were linearly increased with increasing to the drift region length. For the case of decreasing n-well ion implant doses from $1.0\times10^{13}/cm^2$ to $1.0\times10^{12}/cm^2$, the off-state breakdown voltage was increased approximately two times, however, the on-resistance was also increased about 76%. Moreover, the on- and off-state breakdown voltages were also linearly increased with increasing the channel to n-tub spacing due to the reduction of impact ionization at the drift region.

• Journal of Korean Society for Quality Management
• /
• v.24 no.2
• /
• pp.65-76
• /
• 1996

In general, most industrial products exhibit bath-tub shaped curve for their failure rate functions. This distributional life model can be obtained by the Piecewise Weibull distribution. The least squares, maximum likelihood, and mixed methods of estimating the parameters of the Piecewise Weibull distribution are compared. The comparison is made by using the empirical mean squared errors of (a) the parameter estimates and (b) the estimated change-points, to summarize the results of 1000 simulated samples of three sizes - each 100, 150 and 200. The results are that the mixed method estimation comes to be the best as the sample sizes increase.

• International Journal of Reliability and Applications
• /
• v.2 no.1
• /
• pp.1-26
• /
• 2001

The purpose of this paper is to introduce a proportional reversed hazard rate model, in contrast to the celebrated proportional hazard model, and study some of its structural properties. Some criteria of ageing are presented and the inheritance of the ageing notions (of the base line distribution) by the proposed model are studied. Two important data sets are analyzed: one uncensored and the other having some censored observations. In both cases, the confidence bands for the failure rate and survival function are investigated. In one case the failure rate is bathtub shaped and in the other it is upside bath tub shaped and thus the failure rates are non-monotonic even though the baseline failure rate is monotonic. In addition, the estimates of the turning points of the failure rates are provided.

• Journal of Sericultural and Entomological Science
• /
• v.43 no.2
• /
• pp.67-76
• /
• 2001

The "crescent-egg" a new spontaneous mutant was detected in a white egg strain k37. Studies were carried out the linkage analysis, to investigate phenotypic characteristics and biochemical analysis of haemolymph and ovarian protein. The mutant, ore was independent from 20 linkage groups P(2), Ze(3),L(4), oc(5), sn8), Ia(9), w-1(10), K(11), ch(13), U(14), bl(15), cts(16), bts(17), mln(18), nb(19), oh(20),Lan(21), or(22), tub(23) and Xan(27). The fertilization, hatchability and larval growth were not different from the those of normal eggs. The content and composition of yolk protein were similared to normal eggs. Scanning electron microscopy revealed the areal specific structure in dorsal region of egg-shell of cre mutant. Analysis of chorion protein by isoelectrofocusing(IEF), was resolved no difference in the composite of the chorion protein. We conclude that the egg mutant ere is expressed only in the egg-shape formation and region specific determination.