• 제목/요약/키워드: Tricalcium silicate

검색결과 38건 처리시간 0.024초

3CaO.$SiO_2$의 구조전이에 미치는 $BaSO_4$의 영향 (The Effect of Barium Sulfate on the Structural Transformations in Tricalcium Silicate)

  • 서일영;최상흘
    • 한국세라믹학회지
    • /
    • 제11권2호
    • /
    • pp.17-21
    • /
    • 1974
  • Miscibility of barium sulfate in tricalcium silicate was investigated by firing 3CaCO3·SiO2 mixture containing barium sulfate at 1530℃. Added amount of barium sulfate to the mixture was zero to 5 mole % with intervals of 1 mole %. Lattice parametres were also calculated. Results were as follow; 1) Dissolution of barium sulfate in tricalcium silicate does not alter the symmetry in room temperature, but influences it's polymorphic transition forms, temperatures and thermal effects; modification triclinic Ⅱ is stabilized in room temperature. 2) Barium sulfate dissolves about up to 2 mole % in tricalcium silicate and more than this amount, tricalcium silicate formation is inhibited. 3) Unit cell volume of tricalcium silicate is slightly decreased with dissolution of barium sulfate, mainly because of contraction in c axis.

  • PDF

Tricalcium silicate의 수화반응에 따른 $T1_2CO_3$의 영향 (Influence of Thallium Carbonate on the Hydration of Tricalcium Silicate)

  • 임굉
    • 자연과학논문집
    • /
    • 제4권
    • /
    • pp.95-102
    • /
    • 1991
  • 규산삼석회$(C_3S)$의 수화반응에 있어서 $T1_2CO_3$의 농도변화에 따른 영향에 대해서 Isothermal microcalorimeter 등을 이용하여 조사한 결과, $T1_2CO_3$의 존재로 인하여 $C_3S$의 수화반응은 촉진되고 $C_3S$의 농도가 급격히 감소된다. 또 $T1_2CO_3$의 농도증가로 인해서 수화반응속도도 증가하고 있다. $T1_2CO_3$ 첨가에서 수화된 $C_3S$의 분석결과로는 반응초기에 $CaCO_3$가 나타나고 있으며, $T1_2CO_3$의 촉진작용이 수화반응의 초기에 있어서만 더욱 분명하게 나타나고 있음을 $C_3S$의 비휘발성 수분함량과 수화도로서 알수 있고 $C_3S$ paste와 접촉하고 있는 액상의 조성은 $T1_2CO_3$의 존재로 인하여 $Ca^(++)$이온과 $OH^-$ 이온의 농도가 상당히 변화하고 있음을 알 수 있다.

  • PDF

Conservative approach of a symptomatic carious immature permanent tooth using a tricalcium silicate cement (Biodentine): a case report

  • Villat, Cyril;Grosgogeat, Brigitte;Seux, Dominique;Farge, Pierre
    • Restorative Dentistry and Endodontics
    • /
    • 제38권4호
    • /
    • pp.258-262
    • /
    • 2013
  • The restorative management of deep carious lesions and the preservation of pulp vitality of immature teeth present real challenges for dental practitioners. New tricalcium silicate cements are of interest in the treatment of such cases. This case describes the immediate management and the follow-up of an extensive carious lesion on an immature second right mandibular premolar. Following anesthesia and rubber dam isolation, the carious lesion was removed and a partial pulpotomy was performed. After obtaining hemostasis, the exposed pulp was covered with a tricalcium silicate cement (Biodentine, Septodont) and a glass ionomer cement (Fuji IX extra, GC Corp.) restoration was placed over the tricalcium silicate cement. A review appointment was arranged after seven days, where the tooth was asymptomatic with the patient reporting no pain during the intervening period. At both 3 and 6 mon follow up, it was noted that the tooth was vital, with normal responses to thermal tests. Radiographic examination of the tooth indicated dentin-bridge formation in the pulp chamber and the continuous root formation. This case report demonstrates a fast tissue response both at the pulpal and root dentin level. The use of tricalcium silicate cement should be considered as a conservative intervention in the treatment of symptomatic immature teeth.

시멘트 초기 수화과정에 대한 유기혼화제의 영향(I) (Effect of Organic Admixture(Calcium Lignosulfonate) (I) on the Early Hydration Process of Protland Cement)

  • 문정연;최상홀
    • 한국세라믹학회지
    • /
    • 제21권2호
    • /
    • pp.143-148
    • /
    • 1984
  • In this study we mainly dealt with the effects of organic retarder(calcium lignosulfate) on the early hydration process of clinker minerals. From a consideration of the hydration process of tricalcium silicate $(C_3S)$ tricalcium silicate $(C_3S)$-tricalcium aluminate $(C_3A)$ tricalcium silicate $(C_3S)$-tetracalcium aluminof-errite $(C_4AF)$ systems with calcium lignosulfate the following results were obtained. 1. when 0.25wt% of CLS was added to $C_3S$ the hydration process was progressed normally but adding of 0.5wt% its hydration was greatly retarded. 2. The hydration of $C_3S$-$C_3A$ system was progressed normally up to 0.5wt% but by adding gypsum its hydration was retarded slightly. 3. The hydration of $C_3S$-$C_4AF$ system was greatly retarded even with 0.25wt% of CLS but by adding gypsum its hydration process was recovered normally.

  • PDF

Chemical characteristics of mineral trioxide aggregate and its hydration reaction

  • Chang, Seok-Woo
    • Restorative Dentistry and Endodontics
    • /
    • 제37권4호
    • /
    • pp.188-193
    • /
    • 2012
  • Mineral trioxide aggregate (MTA) was developed in early 1990s and has been successfully used for root perforation repair, root end filling, and one-visit apexification. MTA is composed mainly of tricalcium silicate and dicalcium silicate. When MTA is hydrated, calcium silicate hydrate (CSH) and calcium hydroxide is formed. Formed calcium hydroxide interacts with the phosphate ion in body fluid and form amorphous calcium phosphate (ACP) which finally transforms into calcium deficient hydroxyapatite (CDHA). These mineral precipitate were reported to form the MTA-dentin interfacial layer which enhances the sealing ability of MTA. Clinically, the use of zinc oxide euginol (ZOE) based materials may retard the setting of MTA. Also, the use of acids or contact with excessive blood should be avoided before complete set of MTA, because these conditions could adversely affect the hydration reaction of MTA. Further studies on the chemical nature of MTA hydration reaction are needed.

원자짝 분포 함수를 이용한 칼슘 실리케이트 경화체의 나노 구조 변형 거동 해석 (Nanostructural Deformation Analysis of Tricalcium Silicate Paste by Atomic Pair Distribution Function)

  • 배성철;장유현;지현석
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2016년도 추계 학술논문 발표대회
    • /
    • pp.94-95
    • /
    • 2016
  • Calcium Silicate Hydrate (C-S-H), which takes up most of the hydration products of Portland Cement (PC), has the greatest impact on the mechanical behavior and strength development of concrete. The exact mechanism of its deformation, however, has not yet been elucidated. The present study aims to demonstrate the mechanism of nano-deformation behavior of C-S-H in tricalcium silicate paste under compressive loading, unloading and reloading by interpreting atomic pair distribution function (PDF) based on synchrotron X-ray scattering. The strain of the tricalcium silicate paste for a short-range of 0 ~ 20 Å under compressive load exhibited two stages, I) nano-packing of interlayer of C-S-H and II) micro-packing of C-S-H globules, whereas the deformation for a long-range order of 20 ~ 40 Å was similar to that of a calcium hydroxide phase measured by Bragg peak shift. Moreover, the residual strains due to the plastic deformation of C-S-H was clearly observed.

  • PDF

Tricalcium Silicate의 초기수화반응(II) (Early Hydration of Tricalcium Silicate(II))

  • 오희갑;최상흘
    • 한국세라믹학회지
    • /
    • 제24권2호
    • /
    • pp.133-138
    • /
    • 1987
  • The behavior of CaO and SiO2 in the reaction produced which produced in the early hydration of C3S was studied by XRD and thermal analyzer. Polymerization of hydrated siltcates was also studied by TMS method. TMS derivatives were separated by gaschromatography. Cao/SiO2 molar ratios of the produced CSH gel under the air atmosphere were higher than that in the CO2. Dimerization rate of hydrated silicates was very fast in the early hydration stage. Trimer began to appear later than dimer and its increasing rate was very low. The amount of dimer and trimer formed under the CO2 atmosphere was less than that in the air.

  • PDF

난각으로부터 합성된 초미립 CaO 분말을 이용한 C3S, C2S, C3A 분말 합성 및 혼합 경화체에 미치는 C3A 함량의 영향 (Synthesis of C3S, C2S, C3A Powders using Ultra-fine Calcium Oxide Powder Synthesized from Eggshell and Effect of C3A Content on Hardened Mixed Aggregates)

  • 공헌;권기범;박상진;노효섭;이상진
    • 한국분말재료학회지
    • /
    • 제26권6호
    • /
    • pp.493-501
    • /
    • 2019
  • In this work, ultra-fine calcium oxide (CaO) powder derived from eggshells is used as the starting material to synthesize mineral trioxide aggregate (MTA). The prepared CaO powder is confirmed to have an average particle size of 500 nm. MTAs are synthesized with three types of fine CaO-based powders, namely, tricalcium silicate (C3S), dicalcium silicate (C2S), and tricalcium aluminate (C3A). The synthesis behavior of C3S, C2S and C3A with ultra-fine CaO powder and the effects of C3A content and curing time on the properties of MTA are investigated. The characteristics of the synthesized MTA powders are examined by X-ray diffraction (XRD), field emission-scanning electron microscope (FE-SEM), and a universal testing machine (UTM). The microstructure and compressive strength characteristics of the synthesized MTA powders are strongly dependent on the C3A wt.% and curing time. Furthermore, MTA with 5 wt.% C3A is found to increase the compressive strength and shorten the curing time.

Tricalcium Silicate의 초기수화반응(III) (Early Hydration of Tricalcium Silicate(III))

  • 오희갑;최상흘
    • 한국세라믹학회지
    • /
    • 제24권4호
    • /
    • pp.385-391
    • /
    • 1987
  • Zeta potential according to the hydration time was studied during the early hydration of C3S with and without CO2 atmosphere. Zeta potential was low as a level of 20mV at the first and second exothermic peaks of heat evolution, but it was rapidly increased up to a level of 300mV. In the CO2 atmosphere, zeta potential was level of 60mV at 10 minutes hydration and it's value became a low gradually according to the hydration time. Zeta potential was also proportioned to the Ca2+ concentration in the liquid phase, i.e., there was positive correlation between zeta potential and Ca2+ concentration. The existence of silicate layer was not found out on the hydrated C3S in the CO2 atmosphere by SEM-EDAX.

  • PDF