• 전산구조공학
• /
• 제11권1호
• /
• pp.161-170
• /
• 1998

길이가 긴 원통형 실린더를 구성하는 데에 사용될 조인트 부재에 대한 공차설계를 수행하였다. 즉, 원통형 실린더를 체결할 때 사용되는 조인트 부품 가운데 스터드 볼트를 최소 민감도해석에 의해 공차설계를 하였다. 조인트 부재의 공차설계를 위한 최소 민감도 해석에 의한 정식화는 목적함수가 폰 마이세스 응력의 공차에 대한 민감도이고, 여러 부등호 제약식 중에서 자중이 부등호 제안식에 포함된다. 조인트 부재의 경우 자중에 대한 타당한 부등호 제안식을 설정하기 위하여 우선 확정적인 경우에 대한 최적설계를 수행하여 그 범위값을 선정하였다. 원통형 부재의 구조 응답은 축대칭 유한요소로서 구조해석을 수행하여 제안식을 설정하였으며, 직접미분에 의해서 설계 민감도를 구하여 ,최적화 알고리즘과 결합하여 최적의 공차를 제시하였다.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2007년도 정기 학술대회 논문집
• /
• pp.481-486
• /
• 2007

The Zienkiewicz-Zhu(Z/Z) error estimate is slightly modified for the hierarchical p-refinement, and is then applied to L-shaped plates subjected to bending to demonstrate its effectiveness. An adaptive procedure in finite element analysis is presented by p-refinement of meshes in conjunction with a posteriori error estimator that is based on the superconvergent patch recovery(SPR) technique. The modified Z/Z error estimate p-refinement is different from the conventional approach because the high order shape functions based on integrals of Legendre polynomials are used to interpolate displacements within an element, on the other hand, the same order of basis function based on Pascal's triangle tree is also used to interpolate recovered stresses. The least-square method is used to fit a polynomial to the stresses computed at the sampling points. The strategy of finding a nearly optimal distribution of polynomial degrees on a fixed finite element mesh is discussed such that a particular element has to be refined automatically to obtain an acceptable level of accuracy by increasing p-levels non-uniformly or selectively. It is noted that the error decreases rapidly with an increase in the number of degrees of freedom and the sequences of p-distributions obtained by the proposed error indicator closely follow the optimal trajectory.

• 대한의용생체공학회:의공학회지
• /
• 제18권4호
• /
• pp.365-373
• /
• 1997

본 논문에는 표면 형태만을 고려한 방법으로 다수의 단면 영상 데이터로부터, 관심있는 기관의 외부 표면을 패치(patch)에 의한 방법으로 재구성하여 삼차원적으로 표시하는 것을 목적으로 한다. 이를 위해 본 논문에서는 표면을 형성하기 위한 특징점을 추출하기 위하여 제거법에 의한 특징점 추출이라는 알고리즘을 제안하여 사용하였으며, 표면을 재구성하기 윟나 과정에서 두 단면의 영상의 특징점 사이의 최소 거리를 비용 함수로 사용하는 방법을 제안하였다. 제안한 알고리즘의 효용성을 확인하기 위하여 두부에 대한 이차원 CT 영상을 사용하여 실험을 실시하고 다른 방법과 비교하여 보았다.

• 한국게임학회 논문지
• /
• 제16권1호
• /
• pp.111-118
• /
• 2016

본 논문은 빛의 조명으로 defense 게임 플레이에 대한 캐릭터 표면모델을 시뮬레이션하는 데프레넬의 수학적 모델을 제안한다. 여기서 illumination은 게임에서 사용되는 캐릭터표면 모델에 도달하는 빛의 양을 결정하는 프로세스를 나타낸다. 캐릭터 표면의 shader는 일반적으로 빛이 triangle에 반영하는 방법 즉 예측하는 수학적 모델을 사용한다. shading은 일반적으로 색상과 빛의 강도를 결정하기 위해 사용되는 방법인데, viewer에서 본다면 게임 캐릭터의 표면 위에 각 픽셀에 대한 반사결과를 나타낸다. 여기서 제안 모델은 반사와 투과 계수를 계산하여 실제 게임 플레이를 하면서 프레넬 방정식으로 시뮬레이션 결과를 비교하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1993년도 하계학술대회 논문집 B
• /
• pp.935-937
• /
• 1993

This paper presents a three dimensional automatic mesh generation scheme for the boundary element method, and this scheme can be applicable to practical problems of complex shape. The geometry of the problem is expressed as an assemblage of linear Coon's surfaces, and each surface is made up of four edge curves which are defined in the form of a parametric function. Curves are automatically segmented according to their characteristics. With these segments of curves, interior points and triangular mesh elements are generated in the parametric plane using Lindholm's method, and then their projection on the real surface forms the initial mesh. The refinement of initial mesh is performed so that the discrete triangular planes are close to the real continuous surfaces. The bisection method is used for the refinement. Finally, interior points in the refined mesh are rearranged so as to make each element be close with an equilateral triangle. An attempt has been made to apply the proposed method to a DY(Deflection Yoke) model.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제13권5호
• /
• pp.2469-2490
• /
• 2019

A low-energy adaptive clustering hierarchy (LEACH) protocol is a low-power adaptive cluster routing protocol which was proposed by MIT's Chandrakasan for sensor networks. In the LEACH protocol, the selection mode of cluster-head nodes is a random selection of cycles, which may result in uneven distribution of nodal energy and reduce the lifetime of the entire network. Hence, we propose a new selection method to enhance the lifetime of network, in this selection function, the energy consumed between nodes in the clusters and the power consumed by the transfer between the cluster head and the base station are considered at the same time. Meanwhile, the improved FTBA algorithm integrating the curve strategy is proposed to enhance local and global search capabilities. Then we combine the improved BA with LEACH, and use the intelligent algorithm to select the cluster head. Experiment results show that the improved BA has stronger optimization ability than other optimization algorithms, which the method we proposed (FTBA-TC-LEACH) is superior than the LEACH and LEACH with standard BA (SBA-LEACH). The FTBA-TC-LEACH can obviously reduce network energy consumption and enhance the lifetime of wireless sensor networks (WSNs).

• Geomechanics and Engineering
• /
• 제16권5호
• /
• pp.495-501
• /
• 2018

Geogrid application that has proved to be an effective and economic method of reinforcing particles, is widely used in geotechnical engineering. The discrete element method (DEM) has been used to investigate the micro mechanics of the geogrid deformation and also the interlocking mechanism that cannot be easily studies in laboratory tests. Two types of realistically shaped geogrid models with square and triangle apertures were developed using parallel bonds in PFC3D. The calibration test simulations have demonstrated that the precisely shaped triangular geogrid model is also able to reproduce the deformation and strength characteristics of geogrids. Moreover, the square and triangular geogrid models were also used in DEM pull-out test simulations with idealized shape particle models for validation. The simulation results have been shown to provide good predictions of pullout force as a function of displacement especially for the initial 30 mm displacement. For the granular material of size 40 mm, both the experimental and DEM results demonstrate that the triangular geogrid of size 75 mm outperforms the square geogrid of size 65 mm. Besides, the simulations have given valuable insight into the interaction between particle and geogrid and also revealed similar deformation behavior of geogrids during pullout. Therefore, the DEM provides a tool which enable to model other possible prototype geogrid and investigate their performance before manufacture.

• 한국의류산업학회지
• /
• 제22권6호
• /
• pp.826-833
• /
• 2020

When it is necessary to wear masks for long periods, such as during the current COVID-19 pandemic, the essential function of masks to prevent contamination (or transmission to others) as well as comfortableness are important. For this study, we used three-dimensional (3D) facial measurements of adult women to compile basic face shape data for designing comfortable and effective masks. This study analyzed the 3D facial data of 127 subjects in their 20s to 30s of the 6th Size Korea. Factor analysis of the survey data produced seven factors that formed the composition of adult female faces. These factors combined to produce three facial types: square (long face and a large lower middle face), oval (smallest central and lower body in the middle), and triangle (short face with a small central and lower large nose). These types reflect that the facial types of adult women show the differences in the nose angle, nose length, bitragion-subnasal arc, bitragion-menton arc. Therefore, properly fitting masks for fine dust particle filtration require 3D customization of a mask's breathing apparatus to fit differently shaped central and lower face parts that interfere with mask fit.

• Journal of Microbiology and Biotechnology
• /
• 제8권6호
• /
• pp.650-655
• /
• 1998

The chromosomal DNA fragment from Phaffia rhodozyma CBS 6938 which is able to autonomously replicate in the yeast Saccharomyces cerevisiae was cloned on an integrative URA3 plasmid. Its minimal fragment exhibiting autonomously replicating activiy in the S. cerevisiae gave a higher frequency transformation efficiency than that found for centromere-based plasmid, and enabled extrachromosoma1ly stable transmission of the plasmids in one copy per yeast cell under non-selective culture condition. The 836-bp DNA element lacked an ORF and did not contain any acceptable match to an ARS core consensus. Sequence analysis, however, displayed a cluster of three hairpin-Ioop-sequences with individual $\triangle {G_{25}}^{\circ}C$ free energy value of -10.0, -17.5, and -17.0 kcal. $mor^{-l}$as well as a 9-bp sequence with two base pair mismatches to the S. cerevisiae/E. coli gyrase-binding site. This 836-bp sequence also included one 7-bp sequence analogous to the core consensus of centromeric DNA element III (CDEIII) of S. cerevisiae, but CDEIII-like 7 bp sequence alone did not give a replicative function in this yeast.

• Spatial Information Research
• /
• 제21권3호
• /
• pp.31-43
• /
• 2013

벡터 맵 데이터는 다른 멀티미디어에 비하여 높은 가치를 지님에도 불구하고 데이터의 불법복제와 저작권에 대한 인식과 연구는 미비한 실정이다. 본 연구에서는 벡터 맵 데이터의 저장 구조를 고려하여 다양한 공격에 대하여 강인한 워터마킹 기법을 제안하고자 한다. 워터마킹 알고리즘의 설계를 위하여 여섯 가지 접근 방법을 고안하였다(포인트 기반의 접근, 최소 둘레 삼각형 구성, 길이 비율에 대한 워터마크 삽입, 워터마크 이미지의 위치를 참조, 그룹화, 일방함수의 사용). 제안 방법은 입력 효과성, 오검출률, 충실도의 특성을 만족하고 강인성 측면에서 노이즈 첨가를 제외한 모든 공격에서 강인함을 보였다. 또한 제안 방법은 원본 데이터가 필요 없는 Blind 방식이며, 데이터 의존적이지 않은 장점을 갖는다. 추가로 단순화 공격에 대하여 단순화 정도가 심해짐에 따라 강인성이 저하되는 선행 연구의 문제점을 해결할 수 있었다.