• Analytical Science and Technology
• /
• 제18권4호
• /
• pp.271-277
• /
• 2005

Urea in blood has been measured as an effective marker for diagnosis of renal function. Urea which is e end-product of nitrogen containing metabolites such as proteins is filtered through glomeruli of kidneys and then excreted as urine. If the renal function is deteriorated, the urea concentration in blood will be increased, from which the healthiness of renal function is judged. In order to improve the confidence of diagnosis results, the results must keep traceability chain to certified reference materials, which was certified by primary reference method. In this study, we proposed isotope dilution-liquid chromatography/mass spectrometry (ID-LC/MS) as a candidate primary method, in which $15^N_2$-urea is used as an internal reference material. The developed method is highly accurate in principle and is convenient as it does not require cumbersome derivatization. 0.1 mmol/L ammonium chloride was selected as a mobile phase for HPLC because it provided low interference in MS analysis of relatively low molecular weighted urea. HPLC and MS were connected with an electrospray ionization (ESI) interface of positive mode, which provided high sensitivity and reproducibility. The developed method was validated with internationally recognized reference materials, and we have obtained satisfactory results in an international ring trial. The expanded uncertainty calculated according to ISO guide was 1.8% at 95% confidence interval. The developed method is being used as a primary reference measurement method such as for certification of serum certified reference materials (CRMs).

• Journal of the Korea Academia-Industrial cooperation Society
• /
• 제16권8호
• /
• pp.5534-5540
• /
• 2015

This In the railway signaling system, applications of axle counter in addition to track circuit goes on increasing for detecting train position. Consequently, this paper compares sensor methods of axle counter with between geo-magnetism method and proximity sensor method. And it presents differences and results, to improve reliabilities of train detection and axle counting. Also, this article presents an applied result which is based on field experience, with regard to installation, considering attachment condition of sensor part for accurate axle counting. This study acquires expandability that is able to perform not only axle counting function but also various other functions (direction detection of train, speed detection of train, and so on). It was a result of a change of design in order to judge phase difference of sensors, to improve reliability of axle counting. Furthermore, it does not subordinate to characteristics (type, weight of train). And it is confirmed that the omission of axle counting was not occurred in 350km/h. This was the result of Lab test after the construction of transfer equipment of trial axle and Test Bed for axle counting. Both of them are self-productions. Through this, it prepares foundation which is able to apply not only to train detection but also to speed of passing trains, formation number of trains, detector locking condition - when the train passes the section of switch point, and level crossing devices. Furthermore, it would be judged to contribute safety train operation if proximity sensor method applies to the whole railway signaling system from now on.

• Clean Technology
• /
• 제26권2호
• /
• pp.109-115
• /
• 2020

Over the last 3 years, the global food 3D printing market has grown at an average annual rate of 31.5% and has shown an industry size that reached about U$ 9.46 billion. Food 3D printing technology has the advantage of being utilizable in diverse ranges because it enables free design of existing foods so that foods can be produced according to individuals' tastes and purposes. Many countries around the world are producing food 3D printers to release trial products such as foods employing the advantages of food 3D printing. They are also attempting to apply food 3D printing in various fields such as combat rations, space rations, restaurants, liquid foods, foods for the elderly, diets for patients, and baby foods. Whereas the 3D printing market, which has a high growth potential and is expected to continue to expand in size, is highly likely to become a blue ocean, not only is food 3D printing technology small in South Korea, but also the overall ratio of 3D printing utilization and the scale of the relevant industry are small. This is attributable to the fact that South Korea has problems such as insufficient institutionalization compared to developed countries and delays in the development of standardized domestic materials. Therefore, this paper is intended to inform the necessity of food 3D printing and describe food 3D printing technology and food 3D materials in order to obtain the additional effect of vitalizing the South Korean food 3D printing market.

• Journal of the Korean Society of Food Science and Nutrition
• /
• 제38권3호
• /
• pp.302-308
• /
• 2009

This study was performed to investigate the effect of dietary medicinal herb extract mix (MHEM, mulberry leaf : Japanese honeysuckle : goldthread＝48.5:48.5:3.0) on antioxidative activity of chicken thigh meat. The dietary treatments consisted of a corn-soybean meal basal diet (control), basal diet with 0.3% and 1% MHEM. At the end of the feeding trial, thigh meat samples were collected and stored in a refrigerator at $4^{\circ}C$ to be analyzed on day 0, 3, 7 and 14. The MHEM did not affect proximate composition of the thigh meat. Total phenol contents of the thigh meats in treatment groups were higher than that of the control (p<0.05). 1,1-Diphenyl-2-picrylhydrazyl radical scavenging activity were higher in dietary treatment group. 2-Thiobarbituric acid reactive substances values of the treatment group were lower than that of control at day 7 and 14 and the added level also affected the inhibition of lipid oxidation of thigh meat. In sensory test, panelists preferred treatment group at day 7 and 14. Therefore, results indicate that dietary MHEM added to chicken may retard the oxidative deterioration of chicken thigh meat during cold storage.

• Journal of Life Science
• /
• 제22권9호
• /
• pp.1173-1179
• /
• 2012

The importance of genetic stability and bio-safety in the environment has recently been recognized for many (genetically modified) GM plants. This study evaluated the GM safety of transgenic rice and its environmental variance. Data on agronomic characters and principal component were collected for vitamin A-enriched GM rice and four check cultivars in a large GM field trial during 2009-2011. The cultivation environment was a large GM field and a greenhouse. In this experiment, there was no significant difference between the agronomic characters of the GM rice and those of a donor plant, 'Nagdong'. In terms of grain characteristics, the appearance and physicochemical characteristics of the GM rice and those of the donor plant were similar. However, the grain of the GM rice developed a white core and a white belly when planted in the greenhouse. The type and distribution of dominant weed species were not different in the GM rice and the 'Nagdong'. In addition, gene flow was not detected in the dominant weed species based on PCR analysis.

• Korean Journal of Poultry Science
• /
• 제42권3호
• /
• pp.205-214
• /
• 2015

This study aimed to investigate the effects of reducing feed intake on performance and meat quality in old laying hens. A total of 200 Hy-Line Brown laying hens (100 weeks old) were randomly allotted to five dietary treatments: control (100% daily feed intake), 90%, 60%, 50%, and 20% daily feed intake. Each treatment was replicated four times with 10 birds per replication and two birds per cage. Ten-bird units were arranged according to a randomized block design. The feeding trial lasted for 4 weeks under a 16L:8D lighting regimen. The results indicated that the daily feed intake correlated with hen-day egg production and feed conversion ratios (P<0.05). The carcass yields and partial ratios were also correlated with daily feed intake (P<0.05). The levels of leukocytes (without basophils) were higher in the 50% and 20% daily feed intake groups than in the other groups. The concentrations of dry matter, crude ash, crude fat, and crude protein, water holding capacity, cooking loss, and fatty acids in the breast meat did not decrease as the daily feed intake decreased. In conclusion, reducing daily feed intake decreased laying performance and carcass yield but had no effect on breast meat quality.

• Korean Journal of Soil Science and Fertilizer
• /
• 제46권2호
• /
• pp.105-111
• /
• 2013

The experiments were carried out to investigate the biocontrol potential of Lysobacter capsici YS1215 on root-knot nematode and to characterize its lytic enzyme activities. L. capsici YS1215 showed chitinase and gelatinase activities on the medium containing 0.5% chitin or 0.5% gelatin as substrates. Cell growth of L. capsici YS1215 was highest at 6 days, and the highest activities of chitinase (4.0 unit $ml^{-1}$) and gelatinase (7.43 unit $ml^{-1}$) were observed on 3 and 5 days after incubation, respectively. To investigate the effect of L. capsici YS1215 on tomato growth and nematode infection, the plants in pot trial were treated with bacterial culture (BC), half of bacterial culture (HBC), only bacterial medium (BM), tap water (TW) and commercial nematicide (CN). HBC treatd plants showed the higher shoot fresh weight and dry weight on $5^{th}$week after incubation while BM, HBC and BC had consistently higher values than TW at $9^{th}$ week. HBC appeared to be the highest shoot fresh length at $9^{th}$ week. Both CN and BC showed lower number of egg mass, root gall, and population of juveniles in soil compared to BC, HBC, BM and TW. These results suggest that L. capsici YS1215 with its strong ability of lytic enzyme production can be one of the most significant candidates for biocontrol agents against root-knot nematodes.

• Journal of Dental Anesthesia and Pain Medicine
• /
• 제21권5호
• /
• pp.413-429
• /
• 2021

Background: Migraine headaches are the second leading cause of disability worldwide and are responsible for significant morbidity, reduction in the quality of life, and loss of productivity on a global scale. The purpose of this systematic review and meta-analysis was to evaluate the efficacy of ketamine on migraines and other primary headache disorders compared to placebo and other active interventions, such as midazolam, metoclopramide/diphenhydramine, and prochlorperazine/diphenhydramine. Methods: An electronic search of databases published up to February 2021, including Medline via PubMed, EMBASE, Web of Science, and Cochrane Library, a hand search of the bibliographies of the included studies, as well as literature and systematic reviews found through the search was conducted to identify randomized controlled trials (RCTs) investigating ketamine in the treatment of migraine/headache disorders compared to the placebo. The authors assessed the risk of bias according to the Cochrane Handbook guidelines. Results: The initial search strategy yielded 398 unduplicated references, which were independently assessed by three review authors. After evaluation, this number was reduced to five RCTs (two unclear risk of bias and three high risk of bias). The total number of patients in all the studies was 193. Due to the high risk of bias, small sample size, heterogeneity of the outcomes reported, and heterogeneity of the comparison groups, the quality of the evidence was very low. One RCT reported that intranasal ketamine was superior to intranasal midazolam in improving the aura attack severity, but not duration, while another reported that intranasal ketamine was not superior to metoclopramide and diphenhydramine in reducing the headache severity. In one trial, subcutaneous ketamine was superior to saline in migraine severity reduction; however, intravenous (I.V.) ketamine was inferior to I.V. prochlorperazine and diphenhydramine in another study. Conclusion: Further double-blind controlled studies are needed to assess the efficacy of ketamine in treating acute and chronic refractory migraines and other primary headaches using intranasal and subcutaneous routes. These studies should include a long-term follow-up and different ketamine dosages in diagnosed patients following international standards for diagnosing headache/migraine.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• 제20권2호
• /
• pp.404-411
• /
• 2019

In this study, the HEC-HMS was applied to determine rainfall-runoff processes for the Gokgyuchun basin. Several sub-basins have large-scale reservoirs for agricultural needs and they store large amounts of initial runoff. Three infiltration methods were implemented to reflect the effect of initial loss by reservoirs: 'SCS-CN'(Scheme I), 'SCS-CN' with simple surface method(Scheme II), and 'Initial and Constant rate'(Scheme III). Modeling processes include incorporating three different methods for loss due to infiltration, Clark's UH model for transformation, exponential recession model for baseflow, and Muskingum model for channel routing. The parameters were calibrated using an optimization technique with trial and error method. Performance measures, such as NSE, RAR, and PBIAS, were adopted to aid in the calibration processes. The model performance for those methods was evaluated at Gangcheong station, which is the outlet of study site. Good accuracy in predicting runoff volume and peak flow, and peak time was obtained using the Scheme II and III, considering the initial loss, whereas Scheme I showed low reliability for storms. Scheme III did not show good matches between observed and simulated values for storms with multi peaks. Conclusively, Scheme II provided better results for both single and multi-peak storms. The results of this study can provide a useful tool for decision makers to determine master plans for regional flood control management.

• Pediatric Infection and Vaccine
• /
• 제29권1호
• /
• pp.28-36
• /
• 2022

Purpose: To evaluate the efficacy and safety of coronavirus disease 2019 (COVID-19) vaccines in children aged 5-11 years, a rapid systematic review was conducted on published clinical trials of COVID-19 vaccines and studies that analyzed real-world data on adverse events after COVID-19 vaccination. Methods: A systematic search was conducted on medical literature in international (Ovid-MEDLINE) and pre-published literature databases (medRxiv), followed by handsearching up to January 4, 2022. We used terms including COVID-19, severe acute respiratory syndrome coronavirus 2, and vaccines, and the certainty of evidence was graded using the GRADE approach. Results: A total of 1,675 studies were identified, of which five were finally selected. Among the five studies, four consisted of data from clinical trials of each of the four types of COVID-19 vaccines (BNT162b2, mRNA-1273, CoronaVac, and BBIBP-CorV). The remaining study consisted of real-world data on the safety of the BNT162b2 vaccine in children aged 5-11 years. This systematic review identified that COVID-19 vaccines in recipients aged 5-11 years produced a favorable immune response, and were vaccines were effective against COVID-19. The safety findings for the BNT162b2 vaccine in children and early adolescents aged 5-11 years were similar to those data noted in the clinical trial. Conclusions: There is limited data on COVID-19 vaccines in children aged 5-11 years. Consequently continuous and comprehensive monitoring is necessary for the evaluation of the safety and effectiveness of the COVID-19 vaccines.