• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.41 no.2
• /
• pp.123-131
• /
• 2021

The buffer is a key component of an engineered barrier system that safeguards the disposal of high-level radioactive waste. Buffers are located between disposal canisters and host rock, and they can restrain the release of radionuclides and protect canisters from the inflow of ground water. Since considerable heat is released from a disposal canister to the surrounding buffer, the thermal conductivity of the buffer is a very important parameter in the entire disposal safety. For this reason, a lot of research has been conducted on thermal conductivity prediction models that consider various factors. In this study, the thermal conductivity of a buffer is estimated using the machine learning methods of: linear regression, decision tree, support vector machine (SVM), ensemble, Gaussian process regression (GPR), neural network, deep belief network, and genetic programming. In the results, the machine learning methods such as ensemble, genetic programming, SVM with cubic parameter, and GPR showed better performance compared with the regression model, with the ensemble with XGBoost and Gaussian process regression models showing best performance.

• Animal Bioscience
• /
• v.37 no.7
• /
• pp.1168-1176
• /
• 2024

Objective: As a charismatic species, cashmere goats have rich genetic resources. In the Inner Mongolia Autonomous Region, there are three cashmere goat varieties named and approved by the state. These goats are renowned for their high cashmere production and superior cashmere quality. Therefore, it is vitally important to protect their genetic resources as they will serve as breeding material for developing new varieties in the future. Methods: Three breeds including Inner Mongolia cashmere goats (IMCG), Hanshan White cashmere goats (HS), and Ujimqin white cashmere goats (WZMQ) were studied. IMCG were of three types: Aerbas (AEBS), Erlangshan (ELS), and Alashan (ALS). Nine DNA samples were collected for each population, and they were genomically re-sequenced to obtain high-depth data. The genetic diversity parameters of each population were estimated to determine selection intensity. Principal component analysis, phylogenetic tree construction and genetic differentiation parameter estimation were performed to determine genetic relationships among populations. Results: Samples from the 45 individuals from the five goat populations were sequenced, and 30,601,671 raw single nucleotide polymorphisms (SNPs) obtained. Then, variant calling was conducted using the reference genome, and 17,214,526 SNPs were retained after quality control. Individual sequencing depth of individuals ranged from 21.13× to 46.18×, with an average of 28.5×. In the AEBS, locus polymorphism (79.28) and expected heterozygosity (0.2554) proportions were the lowest, and the homologous consistency ratio (0.1021) and average inbreeding coefficient (0.1348) were the highest, indicating that this population had strong selection intensity. Conversely, ALS and WZMQ selection intensity was relatively low. Genetic distance between HS and the other four populations was relatively high, and genetic exchange existed among the other four populations. Conclusion: The Inner Mongolia cashmere goat (AEBS type) population has a relatively high selection intensity and a low genetic diversity. The IMCG (ALS type) and WZMQ populations had relatively low selection intensity and high genetic diversity. The genetic distance between HS and the other four populations was relatively high, with a moderate degree of differentiation. Overall, these genetic variations provide a solid foundation for resource identification of Inner Mongolia Autonomous Region cashmere goats in the future.

• Korean Journal of Plant Resources
• /
• v.27 no.4
• /
• pp.380-391
• /
• 2014

Plants as well as crops are damaged by a combination of the hot and dry winds that has been a major factor in the reduction of crop production. A means to protect them from damaging conditions is to consider a coating material. In this study, we established laboratory screening methods to find a coating material to protect a crop from rapid transpiration caused by various factors. In a test measuring the weight loss of kidney bean seedlings for 6 days, Avion treatments decreased its weight loss (P=0.05). Owing to long-time spend in completing this assay, we performed a more simple method using a cobalt chloride paper strip, which changes from blue to red colors under water condition. Beewax, guagum, paraffin liquid, soybean oil, and PE-635 gave a waterproofing effect above 37 and 43% at 0.5 and 1 h after treatment, respectively. However, these tested materials did not show significant waterproofing results at 2 h. Although the methods produced reasonable results, a screening method to obtain more objective data is needed. An alternative is to use an instrument that can detect the transpiration of crop leaves. In a preliminary test using barley leaves, a portable photosynthesis system showed transpiration inhibition of 2% soybean oil and 10 times-diluted Avion under field conditions. In another test using the leaves of maize seedlings and apricot tree, 2% liquid paraffin and plant oils such as apricot oil, linseed oil, olive oil, and soybean oil showed significant transpiration inhibition (P=0.05). Especially, paraffin liquid and soybean oil selected from above tests gave good transpiration inhibitory effects against rice at 2%. In addition, the mixture of 2% soybean oil and a spreader showed more elevated inhibition results comparing with soybean oil or the spreader alone indicating that the spreader may be attributed to more uniform diffusion of the hydrophobic material onto the leaf surface of maize seedlings. The hydrophobic material coated physically the stomata and cuticle layers on leaf surfaces of rice. These hydrophobic materials screened in this study are expected to be used as plant coating materials.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.36 no.4
• /
• pp.58-69
• /
• 2018

The purpose of this study was to present specific standards for landscape planning and construction applicable to landscaping areas in various historical sites. The results are as follows: First, the types of historical sites are classified according to their preservation status and processing techniques, and the classification according to their status is divided into those that have been buried underground, such as those that have been exposed to the ground, such as buildings and structures, and those that have a reputation or a record of the sites. The classification according to the wartime processing technique was classified by such techniques as closures that isolate the site, penetration that can be seen on the site, and overlays where a separate protection facility is installed on the site. Second, the principles of landscape planning for display of historical sites are divided into the items that make up the historical site, surface treatment of the sites, tree planting, and installation of facilities. If the site is not a circular space, the area separating the space by different materials between the components is required. In the event that preservation of the historical site is required, it is deemed desirable to use the soil, and to do so, the use of grasses and shrubs is effectively considered to be effective. The introduction of plants and plants should be considered according to the nature of the space. Depending on the area and nature of the monument, the facility is required to take a cautious approach by reviewing its influence on the landscape and the additional excavation of the monument. Third, the readjustment method derived as a result of looking at the landscaping principle in the historical site space was classified as conservation of status, installation of protection facilities, burial, restoration, relocation, and reproduction. Preservation of the status quo is essential for limited landscape planning and should not affect the prototype of existing relics. The protection facility shall be installed where necessary to protect the relics, and when the soil is formed, the surface treatment shall be required to remove trees that could damage the site and prevent soil and soil oil from being lost after the site. The restoration shall establish a landscaping plan according to the circular preservation based on the clues to the circle. The transfer requires a landscaping plan to create an environment similar to the outer space of an existing site and should be able to highlight the value or location of the original site. The reenactment should have a landscaping plan to revive the landscape and atmosphere of the past for the now-defunct remains. Fourth, landscaping can simultaneously satisfy the preservation of excavation sites and the increase in exhibition effects. In order to protect the traces of the past and vitalize the site of the ruins today, specific measures are required, the creation of a park for historical sites that preserve the functions and value of the relics, and the formation of a shape of linked contents can be suggested as alternatives.

• Korean Journal of Heritage: History & Science
• /
• v.50 no.3
• /
• pp.110-125
• /
• 2017

The purpose of this study is to investigate the constructional facts and the operational features of Hamchunwon(含春苑), a wonyu(苑?, a royal garden) constructed in Dongbu(Eastern District) of the capital city of Hanyang. As the living quarters of the queen dowagers were scheduled for relocation after the construction of Changgyeonggung Palace(昌慶宮) during the reign of King Seongjong(成宗), it is presumed that the screening tree planting project discussed around tongmangcheo(通望處, a place allowing open view) was the original form of Dongbu Hamchunwon. Dongbu Hamchunwon was a longitudinal royal garden built in the area across the section from Wolgeunmun Gate(月覲門) to Seoninmun Gate(宣仁門), which were both attached to the east side walls of Changgyeonggung Palace. The area corresponds to the west side area of the newly built main building of Seoul National University Hospital today. During the Joseon Dynasty, only royal gardens built within a palace were referred to as geumwon(禁苑, a palace garden). But Dongbu Hamchunwon which was built outside a palace was recognized as a symbolic and hierarchical space comparable to geumwon. The site location of Donbu Hamchunwon was an important place that corresponded to Naecheongnyong(內靑龍) according to Hanyang's geomancy, and large-scale public works were prohibited in order to protect the vein of Naecheongnyong. During the reign of King Injo(仁祖), part of Dongbu Hamchunwon was partitioned as a ranch. The area around the ranch was called Madongsan(馬東山) and Bangmawon(放馬苑) and was an open space used for rest and pleasure (amusement). In the early days of Hamchunwon's construction, fast growing trees were planted to screen the view to Changgyeonggung Palace. However, after the construction of Gyeongmogung Shrine(景慕宮), a broad scale tree planting project was undertaken to complement Naecheongnyong's vapor of the earth. In particular, after the construction of Yugeunmum Gate(?覲門) and Yucheommun Gate(?瞻門) during the reign of King Jeongjo(正祖), Dongbu Hamchunwon functioned as a key point on the King's progress for paying respects to the ancestors, which followed the route of Palace(Changgyeonggung)-Wonyu(Hamchunwon)-Ancestral Shrine(Gyeongmogung).

• Journal of the Korean Graphic Arts Communication Society
• /
• v.30 no.3
• /
• pp.89-114
• /
• 2012

For as to world, the concern about the environment problem is enhanced than any other time in the past because of being 21 century. And the environment problem is highlighted as the world-wide issue. The time of the environment problem intimidates the alive of the mankind and presence of an earth over the time. It becomes the essentiality not being selection in the personal living or the economical viewpoint now to prepare for the climatic modification. As to the company management, the green growth period which it excludes the environment management considering an environment, cannot carry on the company the continued management comes. That is, in the change center of the management paradigm, there is the environment management. Nearly, the greenhouse gas which the publication industry is the environmental toxic material like all industries is generated. The greenhouse gas is ejected in the process of running the manufacturing process and print shop of the various kinds material used as the raw material of the book. Particularly, the tree felling for getting the material of the paper is known to reach the direct influence on the global warming. This study does according to an object it considers and organizes the environment parameter based on this kind of fact as to the publication industry. And it is determined as the reference which is used as the basic materials preparing the case that carbon exhaust right transaction(CAP and TRADE) drawing are enforced in all industries and is sustainable the management of the publication industry and reduces the environmental risk among the company many risk management elements and plans and enforces the publication related policy that there is a value. In the printing publication industry, this study tried to inquire into elements discharging the environmental pollutant or the greenhouse gas. Additionally, in the printed publication production process, it tried to inquire into the effort for an environment-friendly and necessity at the printing paper and the printers ink, regarded as the element discharging the greenhouse gas all kinds of the printing materials, operation of the print shop and all kinds of the machines and recycle process, and etc. These considerations make these industrial field employees aware of the significance about a conservation and environmental protection. They try to give a help in the subsequent study producing quantitatively each environmental parameter emission of green house gas. This makes the calculation of the relative $CO_2$ output reproached ultimately possible. Meanwhile, in a sense, many research protects and improving an environment in connection with the contents of research at the printing publication industrial field is in progress. There will be the voluntary human face that it has to protect an environment but this can not do by the outside factor according to all kinds of environment related law and regulation. Anyway, because of acting on company management as the factor of oppression, the increase of this environment-related correspondence cost could know that the research that the environment loading relates with a procurement and development, environment management system introduction, quality control standard, including, normalizing including a material, and etc. through the part of the effort to reduce the cost low was actively in progress. As to the green growth era, as follows, this paper prescribed the subject and alternative of the print publication industry. It is surrounded by the firstly new digital environment and the generation of the subject. And secondly the printing industry is caused by the point of time when the green growth leaves by the topic which is largest in the global industry and it increases. The printing publication industry has to prepare the bridgehead for the environment-friendly green growth as the alternative for this resolution with first. The support blown in each industry becomes the obligation not being selection. Prestek in which the print publishing was exposed to spend many energies and which is known as the practice of the sustainable print publishing insisted that it mentioned importance of the green printing through the white pages in 2008 and a company had to be the green growth comprised through the environment-friendly activity. The core management for the sustainable printing publication industry presented from Presstack white pages is compacted to 4 words that it is a remove, reduce, recover, and recycle. Second, positively the digital printing(POD) system should be utilized. In the worldwide print out market, the digital printing area stops at the level of 10% or so but the change over and growth of the market of an analog-to-digital will increase rapidly in the future. As to the CEO Jeff Hayes of the Infoland, the offset print referred to that it of the traditional method got old and infirm with the minor phase of the new printing application like the customer to be wanted publication and the print of the digital method led the market. In conclusion, print publishers have to grasp well the market flow in the situation where a digitalization cannot be generalized and a support cannot avoid. And it keeps pace with the flow of the digital age and the recognition about the effort for the development and environment problem have to be raised. Particularly, the active green strategy is employed for the active green strategy.

• Korean Journal of Environmental Agriculture
• /
• v.32 no.3
• /
• pp.201-206
• /
• 2013

BACKGROUND: Kiwifruit, which was introduced to Korea in late 1970s, is a warm-temperate fruit tree, whose leaves are easily damaged by wind because of their large size. To produce high quality fruits, efficient windbreak is necessary to protect leaves until harvest. In Korea, typhoons from July onwards usually influence the production of kiwifruit. Damages from typhoons include low fruit quality in the current year and low flowering ratio the following year. This study was conducted to investigate the effect of early defoliation of kiwifruit vines from July to October on the regrowth of shoot axillary buds the current year and bud break and flowering the following year. METHODS AND RESULTS: Scions of kiwifruit cultivar 'Goldrush' were veneer grafted onto five-year-old Actinidia deliciosa rootstocks, planted in Wagner pots (13L) and grown in a rain shelter. Kiwifruit leaves in the proximity of leaf stalk were cut by lopping shears to simulate mechanical damage from typhoon since only leaf stalks were left when kiwifruit vines were damaged by typhoons. Kiwifruit vines were defoliated from July 15 to October 14 with one monthintervals and degrees of defoliation were 0, 25, 50, 75 and 100%. All experiments were conducted in the rain shelter and replicated at least five times. Defoliation in July 15 resulted in a high regrowth ratio of 20-40% regardless of degree of defoliation but that in August 16 showed only 5.8% of regrowth ratio in the no defoliation treatment; however, more than 25% of defoliation in August 16 showed 17-23% of regrowth ratio. In September 15, regrowth ratio decreased further to less than 10% in all treatments and no regrowth was observed in October 14. Percent bud break of all defoliation treatments were not significant in comparison to 64.7% in no defoliation except for 42.1% and 42.9% in 100% defoliation in July 15 and August 16, respectively. Floral shoot in the no defoliation treatment was 70.2% and defoliation of 50% or less resulted in the same or increased floral shoot ratio in July 15, August 16, and September 15; however, defoliation in October 14 showed no difference in all treatments. In flower number per floral shoot, 2-3 flowers appeared in no defoliation and only 1 flower was observed when the vines were defoliated more than 50% in July 15 and September 15. In October 14, contrary to the floral shoot ratio, flower number decreased with increased defoliation. CONCLUSION(S): Therefore, it is suggested that dormancy of 'Goldrush' axillary buds, was started in August and completed in October. The effect of defoliation on bud break of axillary buds the following year was insignificant, except for 100% defoliation in July 15 and August 16. From July 15 to September 15, floral bud ratio was significantly reduced when more than 50% of leaves were defoliated compared to no defoliation. Also, the number of flowers per flower-bearing shoot the following year decreased by less than 50% when compared to no defoliation, and this decrease was more prominent in September 15 than July 15 and August 16.

• Journal of Korea Water Resources Association
• /
• v.43 no.5
• /
• pp.455-469
• /
• 2010

Changes of geomorphology in alluvial river and vegetation recruitment on its floodplain downstream from dams are investigated both qualitatively and quantitatively focusing on the downstream of Andong dam and Imha dam on the Nakdong River. Results of the analyses of river morphology and bed material in the study site show a general trend of riverbed degradation with a max scour of 3 m and bed material coarsening from pre-dam value of 1.5 mm in D50 to post-dam value of 2.5 mm. Decrease in bed shear stress due to the decrease in flood discharge have caused vegetation recruitment on the once-naked sandbars. As result, the ratio of area of vegetated bars over total area of bars has drastically changed from only 7% in 1971 before the Andong dam (constructed in 1976) to 25% after it, and increased to 43% only three year after the Imha dam (constructed in 1992) and eventually to 74% by 2005. Analysis of the vegetation succession at Wicjeol subreach, one of the three subreaches selected in this study for detailed investigation, has clearly shown a succession of vegetation on once-naked sand bars to a pioneering stage, reed and grass stage, willow shrub and eventually to willow tree stages. At the second subreach selected, two large point bars in front of Hahoe Village seem to have maintained their sand surfaces without a signifiant vegetation recruitment until 2005. The sand bars, however, seem to have been invaded by vegetation recently, which warns river managers to have a countermeasure to protect the sand bars from vegetation invasion in order to conserve them for the historical village of Hahoe. On the other hand, recruitment and establishment of vegetation on the sand bars by artificial disturbance of the river, such as damming, can create an unique habitat of backmarsh in the sandy river, as shown in the case of Gudam Wetland, and may increase the biodiversity as compared with relatively monotonous sand bars. Last, the premise in this study that decrease in flood discharge due to upstream dams and decrease in bed shear stress can induce vegetation recruitment on the naked sand bars in the river has been verified with the analyses of the distribution of dimensionless bed shear stress along the selected cross section in each subreach.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.40 no.1
• /
• pp.1-14
• /
• 2022

This study focused on examining the location characteristics of Mujang-Eupchi(茂長邑治), a traditional city of Joseon Dynasty, and shedding light on its prototype landscape. The findings were summarized as follows: Mujang-Eupchi showed a Confucian space system with Munmyo(文廟) within Hyanggyo(鄕校) in the east, Sajikdan(社稷壇) in the west, Seonghwangsa(城隍祠) in the fortress and Yeodan(厲壇) and Seonghwangdan(城隍壇) in Jinsan(鎭山) in the north around the Mujang-Eupseong(茂長邑城), an old fortress, built in the 17th year of King Taejong(1417). It seemed that Seonghwangdan located in Jinsan maintained a coexistence system with Seonghwangsa(城隍祠) within the Eupseong. A Pungsu(風水) stream in a V-shape ran before the southern gate of Eupseong, forming a Sugu(水口) in front of Namsan(南山) that was an Ansan(案山). They dug a southern pond called Hongmunje(紅門堤) to protect the vitality of the village and built Gwanpungjeong(觀豊亭). In the 19th century, Hongmunje and Gwanpungjeong were renamed into Muheungje(茂興堤) and Muheungdang(茂興堂), respectively. Eupsu(邑藪) were planted in front of the southern pond including Wondo(圓島), and Songdeokbi(頌德碑), Dangsanmok(堂山木), and Dangsanseok(堂山石) served as a Sugumagi(水口막이) and protected the entrance of Eupchi. After the Liberation, the southern pond was buried in 1955, and a market was formed at the site, which resulted in the disappearance of its prototype. The study also investigated the name and location of Chilgeori(七거리) in the village as it was lost following the unification of Bu(府), Gun(郡), and Myeon(面) titles in 1914 during the Japanese colonial period. Chilgeori Dangsan was based on Yin and Yang theory and became the subject of the organization mainly composed of Grandfather Dangsan menhir and Grandmother Dangsan tree. Chilgeori Dangsan was a religious place of the community to guard the village, serving as seven gateways to control access at the village boundary and it had a locational feature of protecting the inner mountain ranges of Eupchi.

• MISULJARYO - National Museum of Korea Art Journal
• /
• v.104
• /
• pp.10-39
• /
• 2023

Seongjusa Temple was founded in Boryeong in Chungcheongnam-do Province by Monk Muyeom (800-888), better known as Nanghye Hwasang. After returning from studying in China, Muyeom stayed in the Silla capital city of Gyeongju for a period. He later settled in a temple that was managed by the descendants of Kim In-mun (629-694). He then restored a burned-out temple and opened it in 847 as a Seon (Zen) temple named Seongjusa. It prospered and grew to become a large-scale temple with several halls within its domains. The influence of Seongjusa in the region can be seen in the Historical Record of Seongjusa Temple on Sungamsan Mountain, which relates that there were seventy-three rooms within the domains of the temple. What is most notable in the record is that the temple is referred to as "栴檀林九間," which means either "a structure with nine rooms built with Chinese juniper wood" or "a place that houses Chinese juniper wood and has nine rooms." Regardless of the interpretation, Seongjusa Temple had a large amount of juniper wood. Around this time, the term "juniper" referred to the olibanum tree (Boswellia sacra) native to the islands of Java and Sumatra in Southeast Asia. It is presumed that at some point after the death of Jang Bogo, the maritime forces that controlled the southwestern coast of Korea may have acquired a large amount of Southeast Asian olibanum wood and offered it to Seongjusa Temple. During the reign of King Munseong, Kim Yang (808-857) patronized Seongjusa Temple and its head monk Muyeom, who enjoyed a lofty reputation in the region. He sought to strengthen his own position as a member of the royal lineage of King Muyeol and create a bridge between the royal family and Seongjusan Buddhist sect. The court of King Wonseong designated Seongjusa Temple as a regional base for the support of royal authority in an area where anti-royal sentiment remained strong. Monk Muyeom is believed to have created an iron Buddha to protect the temple, enlighten the people, and promote regional stability. Given that the Seongjusa community had expanded to include more than 2,000 followers, the iron Buddha at Seongjusa Temple would have been perceived as an image that rallied the local residents. It is assumed that there were two iron Buddhas at Seongjusa Temple. The surviving parts of these Buddhas and the size of their pedestals suggest that they were respectively enshrined in the Geumdang Main Hall and the Samcheonbuljeon Hall of Three Thousand Buddhas. It is presumed that the first iron Buddha in Geumdang was a large statue over two meters in height and the second one was medium-sized with the height over one meter. The Historical Record of Seongjusa Temple on Sungamsan Mountain contains the phrase "改創選法堂五層重閣" which indicates that a multistoried Geumdang was newly built to enshrine a large Buddha sculpture like the first iron Buddha when Seongjusa Temple was founded. Also, according to the Stele of Seongjusa Temple and the surviving finger fragments, the first Buddha was making the fear-not and wish-granting (abhayavarada) mudras. The main Buddha of Seongjusa Temple is possibly Nosana Buddha, just like the main Buddhas at the contemporaneous temples Silsangsa, Borimsa, and Samhwasa. Given that Monk Muyeom studied Hwaeom teachings in his early years and received royal patronage upon his return, it is believed that the retro tendencies of the Hwaeom school, centered on the royal family of the Silla Dynasty, were reflected in Seongjusa temple.