• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 추계학술대회논문집
• /
• pp.266-269
• /
• 2006

Tire is in charge of a lot of function, which is supporting vehicle load, transferring traction and. brake, absorbing impact by road etc. As the silence of vehicle increase more important, the importance of tire noise is more raised. In recent, the study on reduction of tire noise is generally processed. Tire noise is divided in structure home noise and all borne noise. Tire tread properties have a lot of multiplicity. Rubber properties are caused by changing or tread hardness. That change Elastic Modulus and Loss Modulus, which is related by tire noise. In the study, we found that road noise is affected by tread hardness

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 추계학술대회논문집
• /
• pp.690-693
• /
• 2006

As the silence of vehicle is more important, noise reduction of tire is more required. Noise of tire is divided into structure home noise and air borne noise. Tire tread has the property such as Hardness. Pattern Noise is caused by changing of tread hardness. This property has influence on the mechanisms which are Block Impact & Stick-slip sound. In the study, we found that the effect of Hardness is related to more Stick-Slip than Impact.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 추계학술대회 논문집
• /
• pp.1642-1645
• /
• 2008

It is said that the effect in wheels of freight car varies with the type of freight, the condition of operation, the braking device, and the type of bogie. The hardness of open wagon, gondola car, propylene car, covered freight car, container car and hopper car has been measured according to the mileage through this research. As a result, the wheel with more mileages after shaving off the wheel tread has a higher hardness than the others in the case of same type of car.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2009년도 춘계학술대회 논문집
• /
• pp.203-206
• /
• 2009

Articulation Index(AI) is the one of the evaluating methods for the interior sound of the automobiles. The AI measures the articulation level of the sound in the vehicle cabin as passengers talk to another. In this study, the effects of AI were investigated according to the various structures of tire. As the structures of tire were changed, the road noise of the vehicle tire was measured using objective measurement. From this measurement data, the AI was calculated. The AI of front is larger than that of rear. Increasing the tread hardness of tire or decreasing the apex height the AI is improved.

• The Korean Journal of Ecology
• /
• 제17권2호
• /
• pp.149-157
• /
• 1994

To investigate the causes of distribution of Kummerowia striata (Thunb.) Schindl. mostly restricted on the roadside and reclaimed land, plant growth was analyzed under different of tread-pressures: $P_1$(10 times/day, $16.34Kg/cm^2$), $P_2$(20 times/day, $31.52 Kg/cm^2$), $P_3$(30 times/day, $40.79 kg/cm^2$) and the control $P_c$(0 times/day, $3.73 Kg/cm^2$). The matter production in the $P_1$decreased compared with that in the $P_c$, and those in the $P_2$and $P_3$ continuously decreased so that its length growth gradually decreased and, in particular, the growth of leaves and nodule was suppressed. The number of leaves and roots tended to increase in the $P_2$and $P_3$. The water contents of roots following the increase of tread-pressure increased continuously. Following the increase of tread-pressure, T/R ratio and C/F ratio tended to increase. Kummerowia striata showed the highest growth in the $P_c$ and showed 26% relative growth in the $P_1$compared with that in the $P_c$. This plant showed 8% relative growth in the $P_3$, which is excess to the tread-pressure $21Kg/cm^2$, the limit of growth in the plant. Because this plant grew continuously in the P$_3$, the tread-pressure is regarded as an important factor affecting the roadside distribution of this plant.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2010년도 춘계학술대회 논문집
• /
• pp.694-695
• /
• 2010

• Elastomers and Composites
• /
• 제48권3호
• /
• pp.201-208
• /
• 2013

본 연구는 황과 가교 촉진제의 함량이 달리 적용된 acrylonitrile styrene-butadiene rubber (AN-SBR)/silica 컴파운드가 타이어 트레드 컴파운드의 특성에 미치는 영향에 대해 연구하였다. 실험 결과, 가교제 및 가교촉진제의 함량이 증가할수록 가교 반응성이 증대되어 가교속도 및 컴파운드의 가교도가 상승하였다. 또한 내마모 특성 뿐만 아니라 경도, 모듈러스와 같은 컴파운드의 기계적 특성은 높은 가교도에 기인하여 향상되었다. 동적 점탄 특성에서는 가교도의 증가와 함께 유리전이온도 ($T_g$)가 상승하여 $0^{\circ}C$ 영역에서의 tan ${\delta}$ 값이 향상되었고, $60^{\circ}C$ 영역에서의 tan ${\delta}$ 값이 감소되었다. 초기 가교 속도 ($t_1$)는 $60^{\circ}C$의 tan ${\delta}$ 값과 선형적인 관계를 나타내었다. 이는 가교제의 증량으로 초기 가교 속도 ($t_1$)가 빨라져 조기에 가교가 시작됨으로써 filler network 의 발달을 억제시킨 결과에 따른 것으로 판단된다. 이러한 결과는 AFM (atomic force microscopy)을 통하여 열처리된 컴파운드의 표면 관찰에서도 확인할 수 있었다. 따라서, 빠른 초기 가황 반응에 기인한 실리카의 re-agglomeration 감소는 $60^{\circ}C$에서의 tan ${\delta}$를 결정하는 매우 중요한 변수임을 알 수 있다.

• 한국정밀공학회지
• /
• 제31권9호
• /
• pp.783-790
• /
• 2014

Railway wheels and axles are the most critical parts of the railway rolling stock. The wheel carry axle loads and guide the vehicles on the track. Therefore, the contact surface of wheel are subjected to wear and fatigue process. The wheel damage can be divided into three types; wear, contact fatigue failure and thermal crack due to braking. Therefore, in the contact surface between the wheel and the rail, the materials are heat treated to have a specific hardness. The manufacturing quality of the wheel have a considerable influence on the formation of tread wear and damage. Also, the residual stress on wheel is formed during the manufacturing process is one of the main sources of the damage. In this paper, the mechanical characteristic and the residual stress according to wheel material have been evaluated by applying finite element analysis and conducting mechanical tests.

• Elastomers and Composites
• /
• 제55권3호
• /
• pp.215-221
• /
• 2020

Silica/SBR (styrene-butadiene rubber) compounds are the primary constituents of tire treads. Furthermore, the excellent dynamic viscoelastic properties of silica lead to good fuel efficiencies. However, the silanol group on the surface of silica does not mix well with non-polar rubber because of its polarity. This incompatibility causes aggregation due to the occurrence of hydrogen bonding between the hydroxyl groups, thereby reducing the dispersibility of silica. Recently, the wet master batch (WMB) process has been applied to overcome these disadvantages, and research on silica dispersants that can be used in the WMB process has been increasing. In this study, we prepared silica/SBR compounds by using three types of eco-friendly cellulose-based dispersants in the WMB process, namely: cellulose-, sodium carboxymethyl cellulose, and nanocellulose-based dispersants. Subsequently, we compared the vulcanization characteristics, viscoelastic properties, and mechanical properties of the compounds. The silica dispersibility in the rubber compounds was improved with the addition of the nano-cellulose dispersant, resulting in the enhancement of the workability, hardness, tensile strength, and wear resistance of the SBR compound.

• 공업화학
• /
• 제2권4호
• /
• pp.356-362
• /
• 1991

가황계에 따른 NR/BR 블렌드의 물리적 기계적 특성의 변화를 가교밀도의 차이로 해석하였다. 경화제의 비율 및 함량이 증가함에 따라 가황속도 및 최대 토오크는 증가를 보였으며, 가교밀도도 증가하였다. 가교밀도의 증가에 따라 경도, 300% 모듈러스, 반발탄성 및 마모특성은 증가를 보인 반면에 발열에 의한 온도 상승 및 $60^{\circ}C$에서의 tan $\delta$는 감소를 보였다. 따라서 높은 하중이 가해지는 트럭/버스 타이어의 트레드 부위에 사용하는 경우 회전저항이 적은 semi-EV 가황계가 가장 적절한 가황 시스템으로 판단되었다.