• Journal of Korean Society of Transportation
• /
• v.27 no.6
• /
• pp.119-127
• /
• 2009

It has been known that bus route and company related characteristics have influences on punctuality, but fewer research have been conducted. Independent variables used in this study were selected using correlation analysis, and OLS(Ordinary Least Square) and HLM(Hierarchical Linear Model) were employed to identify factors affecting bus punctuality(headway deviation). The results showed that ICC(intraclass Correlation Coefficient) is 0.10, indicating that hierarchical linear models are more adequate for these data because there is effective variation in the subjects between companies. Punctuality was found to be negatively associated with the number of vehicles, the number of persons per vehicle, and total travel time. On the other hand, average headway and company size have a positive relationship with punctuality. Therefore, the number of vehicles per route, average headway, and the number of vehicles managed by a company should be considered for more accurately evaluating the management of piunctuality.

• Proceedings of the KWS Conference
• /
• 2009.11a
• /
• pp.108-108
• /
• 2009

Precipitation hardening nickel base alloys strengthened by intermetallic compounds are extensively used to manufacture on the components of the hot section of gas turbine engines. To ensure structural stability and maintenance of strength properties for a long time, nickel alloys are normally subjected to complex alloying with elements to form ${\gamma}'$(gamma prime). Such alloys have a limited weldability, are normally welded in high temperature. However, laser welding have a merit that applies in room temperature as easy control of welding parameter and heat input. In this study, $CO_2$ laser welding is applied on STS304 plate with good ductility and precipitation hardening nickel base alloy (GTD111DS) used blade material. Also, several welding parameters are applied on powder, power and travel speed. There are no cracks in Rene 80 and IN 625 powder when STS304 plate is used. But IN 625 powder has no cracks and Rene 80 have some cracks in welds with GTD111DS substrate. Adjusting of welding parameter is tried to apply Rene 80 having a good strength compare to IN 625. In the result of adjusted welding parameter, optimized welding parameters are set with low power, low feed rate and high welding speed. Tensile strength of GTD111DS substrate with Rene 80 powder is same and over than the one of base metal in room temp and high temp($760^{\circ}C$).

• International Journal of Highway Engineering
• /
• v.10 no.4
• /
• pp.65-77
• /
• 2008

LOS(Level of Service) concept are popularly used in many countries as the MOEs to evaluate the road construction and operation plans. However, MOEs such as travel time and delay only measure quantitative factors describing traffic flow, although qualitative factors such as scenic, comfort and reliable factors are very important for roadway drivers to define the LOS. Therefore, this paper are focusing on verifying the difference between perceived LOS and LOS in KHCM, and proving qualitative factors affecting Drivers' Perceived LOS in Urban Arterial. As a result, following outputs are obtained; (1) verifying the difference between perceived LOS(PLOS) and LOS in KHCM (2) proving that qualitative factors such as scenic and driver behavior factors affects PLOS (3) suggesting that qualitative factors should be considered in MOEs of LOS

• Journal of Korean Society of Transportation
• /
• v.24 no.2 s.88
• /
• pp.101-112
• /
• 2006

Currently, highway design speed is determined by considering highway function, area type, and terrain type. Sometime it is pointed out that determining a reasonable design speed which is both efficient and safe is not an easy task and that Practicing engineers often select an unsuitable design speed on purpose, capitalizing on some ambiguous and discretionary expressions in describing the highway design speed. This undesirable Problem is arising mostly due to the fact, that the current geometric design standard fails to include rolling terrain type and can not reflect the whole characteristics of land use patterns adjacent to the design highway route. A recent research was Published considering this problem and it attempted to improve the highway design speed determining process. In this research Project, tn see the effects of this recently developed procedure, a new and reduced design speed was calculated based on the new Procedure and subsequently another highway design route was selected. The travel time. construction cost. and the expected degree of safety associated with the new route were assessed to be compared with the ones with the existing procedure. As a result. it was found that the new procedure was successful in reflecting the localities such as terrain type and area type into better determining highway design speed, eliminating much of highway engineers' discretion when applying engineering judgments. Also the new Procedure is keen to produce a more economical highway project. In other words, despite of producing reduced amount of user benefits accrued, in the new highway route, the construction cost has been cut significantly leading to higher values in B/C. NPV, and IRR. Also EMME-II output, which Provided the link assigned volumes, rendered only a slightly reduced Levels of Service along surrounding links in the study network. This reduction was believed to occur because of lower design speed and it had been expected from the beginning.

• Journal of Korean Society of Transportation
• /
• v.25 no.5
• /
• pp.91-100
• /
• 2007

This study suggests direct connection service which has advantage of high-speed operation of KTX and access convenience of general train, and Pre-feasibility studies on the direct connection service. And analyze transportation demand change by the method as follows; It is to analyze the demand change of before and after KTX operation by previous transport data of Gyeongbu line, and calculate the coefficient of utilization using triggering demand by opening the 2nd phase of Gyeongbu line (Dongdaegu${\sim}$Busan). Through Pre-feasibility analysis, reduction $70{\sim}100$ minutes of train travel time and total revenue will increase about $100 thousand per day. Also, there will be environment-friendly effects of decreasing $CO_2$ emissions. But, Direct connection service need to highly cost ; Buying and Operation cost of KTX train. Therefore, we will be get more correct result of Pre-feasibility study on direct connection service, if there are concrete on buying the KTX action plans.

• Journal of Korean Society of Transportation
• /
• v.31 no.3
• /
• pp.55-64
• /
• 2013

Conventionally, greenhouse gas (GHG) emissions in the transport sector have been estimated using the fuel consumption (i.e. Tier 1 method). However, the GHG emissions on road networks may not be practically estimated using the Tier 1 method because it is not practical to monitor fuel consumption on a road segment. Further, air pollutant emissions on a road may not be estimated efficiently by the Tier 1 method either due to the diverse characteristics of vehicles, such as travel speed, vehicle type, model year, fuel type, etc. Given these conditions, the goal of this study is to propose a Tier 3 level methodology to calculate $CO_2$ and $NO_X$ emissions on inter-regional roads using the information from ITS infrastructure. The methodology may avoid the under-estimation issue caused by the concavity of emission factor curves because the ITS speed or volume information is aggregated by a short time interval. The proposed methodology was applied to 4 road segments as a case study. The results show that the management of heavy vehicles' speed is important to control the $CO_2$ and $NO_X$ emissions on road networks.

• Journal of the Korean Regional Science Association
• /
• v.32 no.4
• /
• pp.39-49
• /
• 2016

The main objective of this paper is to analyze university students' modal shift for commuting trip due to the introduction of new urban rail transit in a satellite city of metropolitan area. The paper uses SP(2011)/RP(2013) data collected from Yeungnam University in Gyeongsan City, which is a satellite city of Deagu Metropolitan City. So far few researches, especially using before-and-after individual SP/RP travel survey, have been conducted on analyzing university students' modal shift due to the introduction of new urban rail transit. For this research, some descriptive statistical analyses were conducted. Furthermore, some empirical logit models were estimated for analyzing factors affecting the modal shift. Finally, some important findings and policy implications are discussed. The significant findings from this research are summarized as follows. From the descriptive statistical analyses of SP and RP data, it is found that the rate of modal shift to rail transit is relatively high especially for bus travellers. Furthermore, from the empirical SP model estimation, it is found that time saving is the most important factor affecting the modal shift to urban rail transit. On the other hand, from the empirical RP model estimation, it is found that residential location is the most important factor affecting the modal shift to urban rail transit.

• Journal of Korean Society of societal Security
• /
• v.1 no.3
• /
• pp.59-67
• /
• 2008

The most influential facility causing traffic disaster on the urban road is intersection. Accordingly, this study elected a region for case study from seabang three-way junction, partial section of Dongmoon Ro in Kwang-Ju city, to the intersection of Mudeung Library Entrance. It is believed that the signal progression is very effective on the basis of short interval of intersection and massive traffic volume. The signal progression was simulated by using TRANSYT-7F model. The following is summary of the simulation: According to the change of cycle length, P.I. delay and fuel consumption showed the tendency of being increased in case that cycle length becomes long or short, centering around the best cycle length. In the event of progressing the cycle length, the average speed per vehicle is increased by 11.39Km per hour and P.I value is improved by 40.65% so that it resulted in 42.86% improvement in the total travel time. Moreover, the fuel consumption in line with the progression practice produced fuel saving of 31.04%.

• The Journal of the Korea Contents Association
• /
• v.15 no.3
• /
• pp.303-317
• /
• 2015

Although the public health centers have been initiating health education recently, it is not extending as expected and the participation of the program is low. The reason is that the office workers have few opportunities to receive health education since there are few public health centers in relation to the population. Much time is required for travel and attendance of the classes. In order to solve this problem, the aim is to increase participation in health education, improve the overall public health awareness, expand the number of health education locations to reduce medical expenses, vitalize the lifelong educational health programs, and improve the national health insurance. In order to research about the health education expansion plan for public health improvement, a study focused on men and women above age 20 who need health education. The research sample was selected through random sampling that targeted people who participated in the health programs or the health education. The period of this survey was from September 1st to September 30th, 2014. A total of 509 participants completed the survey data for the actual analysis to propose the health education expansion plan for the public health improvement.

• Journal of The Korean Astronomical Society
• /
• v.49 no.5
• /
• pp.199-208
• /
• 2016

We present photometric results of the δ Sct star V1162 Ori, which is extensively monitored for a total of 49 nights from mid-December 2014 to early-March 2015. The observations are made with three KMTNet (Korea Microlensing Telescope Network) 1.6 m telescopes installed in Chile, South Africa, and Australia. Multiple frequency analysis is applied to the data and resulted in clear detection of seven frequencies without an alias problem: five known frequencies and two new ones with small amplitudes of 1.2-1.7 mmag. The amplitudes of all but one frequency are significantly different from previous results, confirming the existence of long-term amplitude changes. We examine the variations in pulsation timings of V1162 Ori for about 30 years by using the times of maximum light obtained from our data and collected from the literatures. The O − C (Observed minus Calculated) timing diagram shows a combination of a downward parabolic variation with a period decreasing rate of (1/P)dP/dt = −4.22 × 10⁻⁶ year⁻¹ and a cyclic change with a period of about 2780 days. The most probable explanation for this cyclic variation is the light-travel-time effect caused by an unknown binary companion, which has a minimum mass of 0.69 M_⊙. V1162 Ori is the first δ Sct-type pulsating star of which the observed fast period decrease can be interpreted as an evolutionary effect of a pre-main sequence star, considering its membership of the Orion OB 1c association.