• Korean Chemical Engineering Research
• /
• v.48 no.4
• /
• pp.490-498
• /
• 2010

The optimum mold design and the optimum process condition were constructed upon executing process simulation of rubber injection molding with the commercial CAE program of MOLDFLOW(Ver. 5.2) in order to solve the process-problems of K company relating to air-traps and short-shots. The former occurs at the cavity edge of torque-rod-bush and the latter takes place for the injection molding of dynamic dampers. As a result the process problem relating to air traps was solved by optimizing edge-angle and the number of gates to prevent the flow congestion of flow-front and to make the flow-front movement unaffected by congestion. For dynamic dampers of K company the unmolded flaw caused by their unfilled cavity was corrected by installing the air-vent at the confronting locations of both upstream and downstream of flow-front where air traps frequently occur. Besides the unmolded flaws were rectified by altering the position of gate from the upper to the middle or by increasing the number of gates. Thus the process problems of K company relating to air-traps and short-shots of torque-rod-bush and dynamic dampers, respectively, were solved by proper altering of mold design with process simulation of rubber injection molding.

• Korean journal of applied entomology
• /
• v.17 no.2 s.35
• /
• pp.105-113
• /
• 1978

The experiments were carried out both at $#160$, Anyang Ri, Anyang, Kyung-gi Do, as a field plot and at college of Agriculture, Seoul National University, Suweon as laboratory plot, in order to unnorive the types of traps for collection of adult pine gall midge (Thecodiplosis japonensis Uchida) And the conclusions of the experimental results were as follows. (1) The seasonal fluctuation of the adult emergence of the PGM continued from middle pa.1 of the May to late part of the August. And the peak of the adult emergence showed variation in the number of PGM captured, according to the types of traps used, such as May 2g-june 2, by standard Cage, June 3-June7 by Funnel-A t.sp and June 8-June 12 by Suction-Trap. (2) The Percentage of the emergence in the laboratory experimental Plot were $41.06\%$ of Funnel-A traps used. f 3) The Suction-Trap was considered as effective instrument of. collection of adult PGM especially in the seasons of both earlier and later parts of the adult emergence, which is the population density is extremelty low. (4) It is considered that the recommendable instruments were Funnel-A type of trap and suction-Trap according to the experimental results obtained.

• Korean journal of applied entomology
• /
• v.49 no.2
• /
• pp.123-127
• /
• 2010

Attractiveness of different amounts of methyl (E,E,Z)-2,4,6-decatrienoate, the aggregation pheromone of brown-winged stink bug, Plautia stali (Hemiptera: Pentatomidae), was tested using different kinds of dispensers. A lure filled with hexane was used as a control treatment. There were no differences in the attractiveness of the pheromone to P. stali and Halyomorpha halys among dispensers (polyethylene-vial, rubber septum, and polyethylene tube). Traps baited with 7, 20, 40, 50, and 60 mg of pheromone were tested for their attractiveness. For females, the 40 mg trap attracted highest number of P. stali, even though there were no significant differences among pheromone amounts. For males, the 40 and 50 mg traps attracted significantly more bugs than the 7, 20, and 60 mg traps and the control traps. Based on these results, the pheromone dispenser impregnated with 40 mg of pheromone will be practical in monitoring P. stali in the field.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.46 no.3
• /
• pp.195-203
• /
• 2010

Recently, Fishermen have required to expand the circumference of trap entrance for conger eel because it was difficult to take the catch out as well as to put the baits into. A series of fishing experiments was carried out in coastal areas of Tongyoung, Korea in 2008 and 2009 using the traps to describe the effect of the entrance size on the catch. The experimental traps (five types) were used in filed experiments with four types circumference size traps (140, 180, 220 and 260mm) with mesh size 22mm and another type was used the same one usually using in filed with mesh size 35mm (750mm circumference). The experiment results were, the conger eels of total length 35mm more or so were caught 85, 93, 142 and 176 individual by the experiment traps with mesh size 22mm as increase circumference size from 140mm to 260mm, respectively. And the small conger eels of the total length below 35mm to be prohibited to catch by law were caught 145, 160, 288 and 304 individual according to increase the circumference size of trap, respectively. In addition, in case of the trap with mesh size 22mm, bycatches were 230 - 260 individuals and much more than bycatches of the trap with mesh size 35mm. In conclusion, when we expand the circumference size of trap according to fishermen's requirement, we should review not only economic of fishery but also increasement the bycatch of non-target fishes and small size fishes.

• The Korean Journal of Soil Zoology
• /
• v.7 no.1_2
• /
• pp.1-5
• /
• 2002

The pumpkin fruit fly [Bactrocera (paradacus) depressa Shiraki] was first trapped on June 1st with ground and Mcphail traps in Jinan and Iksan drea, Chonbuk Province and was found to have single generation during the grow-ing season in 2002. Not much difference existed in the number of B. (paradacus) depressa flies attracted to various colors but Bactrocera (zugodacus) scurellatus Hendal came to yellow and green more than to blue color. In a study of the effect of diets on the degree of attraction by the flies, it turned out that B. (paradacus) depressa came more to yeast hydrolysate (YH) and in June i.e, the early period of adult emergence of the year. However, more individuals of B. (zugodacus) scutellatus are attracted to the extract of young pumpkin fruits. More B. (paradacus) depressa was caught with McPhail traps while more B. (zugodacus) scurellatus was caught with sticky traps and accordingly, species specific traps are recommended when yearly population trends of fruit flies are studied.

• Korean Journal of Environmental Agriculture
• /
• v.42 no.4
• /
• pp.371-381
• /
• 2023

The effectiveness of plant-based attractants was studied using large traps, which attracted relatively more snails in agricultural water drainage ditches and rice-cultivating environments, although their effectiveness in rice fields and lakes was limited. The rate began to rise after three hours of observation. Watermelon peel exhibited the highest apple snail attraction rate (13.8%), followed by potatoes (10.0%), and apple peel (8.8%). These values significantly differed from the attraction rate attributed to papaya leaves (F=3.84; P=0.0387). After 24 h, watermelon peel and apple peel indicated a higher rate of attraction (23.4% and 21.7%, respectively), which were significantly different compared with those of papaya leaves and potatoes (F=9.94; P=0.00455). Large bait traps outperformed funnel traps in capturing golden apple snails and trapped a significant number of snails measuring over 1 cm in size. Watermelon peel was the most effective attractant for a large bait trap, followed by apple peel, potatoes, and papaya leaves. On average, 110 snails were captured in the lure net. However, potatoes, apple peels, and papaya leaves caught an average of 93, 80, and 79 snails, respectively. Among the attractants, the lure effect of the snails was not significantly different. The efficiency of large bait traps in capturing snails, regardless of the plant attractant employed, followed the order: apple peel > watermelon peel and potatoes > papaya leaves > melon > Korean melon. Watermelon peel is highly recommended for farmer use, as well as apple peel and potatoes. Utilizing these snail attractants may contribute positively to developing a safe and environment-friendly integrated pest management strategy.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.04b
• /
• pp.43-46
• /
• 2000

In this paper, the stress and transient currents associated with the on and off time of applied voltage were used to measure the density and distribution of high voltage stress induced traps in thin silicon oxide films. The transient currents were due to the discharging of traps generated by high stress voltage in the silicon oxides. The trap distributions were relatively uniform near both cathode and anode interface. The trap densities were dependent on the stress polarity. The stress generated trap distributions were relatively uniform the order of $10^{11}\sim10^{21}$[states/eV/$cm^2$] after a stress. The trap densities at the oxide silicon interface after high stress voltages were in the $10^{10}\sim10^{13}$[states/eV/$cm^2$]. It appear that the stress and transient current that flowed when the stress voltage were applied to the oxide was caused by carriers tunneling through the silicon oxide by the high voltage stress generated traps.

• Journal of the Korean Ceramic Society
• /
• v.28 no.2
• /
• pp.141-145
• /
• 1991

The effects of the melt stoichiometry on the concentration of electron and hole traps formed by intrinsic defects of LEC GaAs were studied employing DLTS measurement technique. The concentration of EL2 were varied from $10^{16}cm^{-3}$ to $10^{11}cm^{-3}$ when the arsenic atomic fraction in the melt ([As]/{[As]+[Ga]} varied from 0.5 to 0.42. Specifically, when the fraction falls below 0.46, the 띠2 concentration start to decrease sharply. For 68meV and 77/200meV traps, their concentration increase inversely with the arsenic atomic fraction and have the values in the range of TEX>$10^{15}cm^{-3}$ and $10^{14}cm^{-3}$, respectively. It is, therefore, concluded that these hole traps originated from the intrinsic acceptor defects including $GS^{AS}$.

• Journal of the Korean Applied Science and Technology
• /
• v.30 no.2
• /
• pp.290-296
• /
• 2013

We analysed interfacial traps in organic thin-film transistors (TFTs) in which pentacene and 6,13-bis(triisopropylsilylethynyl)-pentacene (TIPS-pentacene) organic semiconductors were deposited by means of vacuum-thermal evaporation and drop-coating methods, respectively. The thermally-deposited pentacene film consists of dentritic grains with the average grain size of around 1 m, while plate-like crystals over a few hundred microns are observed in the solution-processed TIPS-pentacene film. From the transfer characteristics of both TFTs, lower subthreshold slope of 1.02 V/decade was obtained in the TIPS-pentacene TFT, compared to that (2.63 V/decade) of the pentacene transistor. The interfacial trap density values calculated from the subthreshold slope are about $3.4{\times}10^{12}/cm^2$ and $9.4{\times}10^{12}/cm^2$ for the TIPS-pentacene and pentacene TFTs, respectively. Herein, lower subthreshold slope and less interfacial traps in TIPS-pentacene TFTs are attributed to less domain boundaries in the solution-processed TIPS-pentacene film.

• Electrical & Electronic Materials
• /
• v.10 no.8
• /
• pp.800-806
• /
• 1997

The behavior of de levels in rapid thermal annealed Fe-doped semi-insulating InP(100) was studied by photoinduced current transient spectrocopy(PICTS). In bulk InP, T2(Ec-0.24 eV), T3(Ec-0.30 eV) and T5(Ec-0.62 eV) traps were observed. After annealing the T2 trap was annihilated at 20$0^{\circ}C$ and recreated at 35$0^{\circ}C$. T3 trap was not affected below 40$0^{\circ}C$. With increasing temperature the concentration of T5 trap reduced and it was annihilated at 30$0^{\circ}C$. However the T1(Ec-0.16 eV) and T4(Ec-0.42 eV) traps were began to appear at 40$0^{\circ}C$and these concentrations were increased with annealing temperature. The T1 and T4 traps seem to be related to the isolated phosphorus vacancy( $V_{p}$) and $V_{p}$-indium antisite( $V_{p}$- $P_{in}$ ) or $V_{p}$-indium interstitial( $V_{p}$-I $n_{I}$) respectiely.respectiely.