• 대한건축학회논문집:계획계
• /
• 제35권1호
• /
• pp.29-35
• /
• 2019

The unit modular system is a type of prefabricated construction method that completes the building by uniting the modular units on site by transporting the unit module structure manufactured in the factory to the site. Since the unit module structure is not only the frame but also the finished form including the inner and outer materials, it is most likely to be brought into the field. Therefore, not only the damage of the inner and outer materials but also deformation of frame structure due to the vibration generated during the transportation of the vehicle, And it is necessary to take appropriate methods when transporting the module structure. However, there are no methods to prevent modular structure damage due to vehicle vibration in domestic and foreign modular transportation guidelines or standards. In this study, we investigate the vibrations during the vehicle transportation of the module structure through the road driving test, identify the vibration frequency characteristics of the vehicle through FFT analysis, and propose a vibration reduction methods for module transportation.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 2001년도 동계 학술대회 논문집
• /
• pp.420-425
• /
• 2001

• Industrial Engineering and Management Systems
• /
• 제6권2호
• /
• pp.125-135
• /
• 2007

An automated guided vehicle (AGV) system is a group of collaborating unmanned vehicles which is commonly used for transporting materials within manufacturing, warehousing, or distribution systems. The performance of an AGV system depends on the dispatching rules used to assign vehicles to pickup requests, the vehicle routing protocols, and the home location of idle vehicles, which are called dwell points. In manufacturing and distribution environments which emphasize just-in-time principles, performance measures for material handling are based on response times for pickup requests and equipment utilization. In an AGV system, the response time for a pickup request is the time that it takes for the vehicle to travel from its dwell point to the pickup station. In this article, an exact dynamic programming algorithm for selecting dwell points in a tandem-loop multiple-vehicle AGV system is presented. The objective of the model is to minimize the maximum response time for all pickup requests in a given shift. The recursive algorithm considers time restrictions on the availability of vehicles during the shift.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제49권5호
• /
• pp.249-256
• /
• 2000

This paper deals with the control of the lateral motion of a mobile vehicle. A mobile vehicle using in this experiment is able to adapt many unmanned automatic driving system, for example, like a automated product transporting system. This vehicle is consist of the two servomotors. One is used to accelerate this vehicle and the another is used to change this lateral direction. An adaptive fuzzy logic controller(AFLC) is designed and applied to a experimental mobile vehicle in order to achieve the control of the lateral direction. An adaptive fuzzy logic controller(AFLC) is designed and applied to a experimental mobile vehicle in order to achieve the control of the lateral motion of the vehicle. Therefore, the main aim of this paper is investigate the possibility of applying adaptive fuzzy control algorithms to a microprocessor-based servomotor controller which requires faster and more accurate response compared with many other industrial processes. Fuzzy control rules are derived by modelling an expert's driving actions. Experiments are performed using a mobile vehicle with sensing units, a microprocessor and a host computer.

• 디지털산업정보학회논문지
• /
• 제6권1호
• /
• pp.131-142
• /
• 2010

In this paper, we propose a web GPS based logistics vehicle control management system using MVC design patterns. The proposed system is designed by applying design patterns of object oriented modeling called mini-architecture to enhance reliability of software as well as promote stability of overall system design. In addition, we can get a position information by means of the GPS embedded in PDA and communicate between client and monitoring server using CDMA network so that the position of client can be identified directly by the map service. The system provides an moving object indexing technique which extends the existing TB-tree to manage and retrieve a transporting trajectory of logistics efficiently. Finally, with development of the logistics vehicle control service called WG-LOGICS system, we can verify the usefulness of our system which is able for monitoring a vehicle preparation, allocating registration, loading a burden, transfer path, and destination arrival in real world.

• Journal of Biosystems Engineering
• /
• 제27권5호
• /
• pp.417-424
• /
• 2002

This study was conducted to develop a vehicle, leading or following a worker at a certain distance to assist laborious transporting works in greenhouses. A prototype vehicle was tested in the practical field conditions using a developed control algorithm. Results of this study were summarized as following: 1. The sensing device consisted of infrared sensors was attached to the front of the vehicle and turning following algorithm was developed to make the vehicle turned as it follows a worker simultaneously. 2. The measured average power consumptions were 110W and 89W, equivalent to 5.2-6.4 hrs battery durations, at low speed with and without the maximum payload, respectively. 3. Results of the travel tests showed that the deviations from the center of row spacing were $\pm$100 mm along the ridge and $\pm$85 mm along the hydroponic bed in the greenhouse. Therefore, the worker-following transport vehicle was feasible to travel along the row without collision in the greenhouse.

• 제어로봇시스템학회논문지
• /
• 제18권8호
• /
• pp.706-712
• /
• 2012

This paper presents a sensor network and operation for multiple autonomous navigation platform and transport service. Multiple platform navigate with inside sensors and outside sensors while acquiring and process some useful information. Each platform communicates each other by navigational information through central main server. Efficient sensor network systems are considered for the scenario which some passengers call the service and the vehicle accomplish its transport service by transporting each caller to the destination by autonomous manners. In the scenario, all vehicles perform a role of sensor system to the central server and the server handles each information and integrate with faster procedure in the wireless 3G network.

• 한국재난정보학회 논문집
• /
• 제13권1호
• /
• pp.1-5
• /
• 2017

지난 3년('13~'15)간 화학물질사고는 301건이 발생하였으며, 연평균 약 100건이 집계됐다. 이와 같은 화학사고는 인명과 환경에 많은 피해를 가져왔다. '13년~'15년에 발생한 운반차량 화학사고는 연평균 21건으로 전체 화학사고의 약 21%를 차지한다. 화학물질 운반차량의 사고는 지역에 관계없이 도로상에서 발생하고 있기 때문에, 관계기관의 대응 및 사후처리 등 체계적인 현장조사가 필요하다. 또한 화학물질 운반업자 및 화물주 등의 협조가 절대적으로 필요한 상황이다. 따라서, 본 논문에서는 화학물질 운반차량의 사고발생에 대한 현장조사 및 처리 절차를 조사 분석하였다. 이를 통해 운반차량의 화학사고에 대한 원인을 분석하고 현장조사와 처리절차를 체계적으로 마련하는 기초자료가 될 것으로 판단된다.

• Journal of Biosystems Engineering
• /
• 제27권5호
• /
• pp.409-416
• /
• 2002

This study was conducted to develop a vehicle, leading or following a worker at a certain distance to assist laborious transporting works in greenhouses. A prototype vehicle, which consisted of the rear driving, the front steering and the console units, was designed and tested in the ideal indoor conditions. Results of this study were summarized as following: 1. The driving unit was designed to travel at the speed ranges of 0.3∼0.8 m/sec depending on the operating modes with a maximum payload of 100 kg. 2. The console unit consisted of a main-board including a 80C196KC microprocessor and peripheral devices, a power-board and safety interlock. Worker-leading, and following modes were available in automatic and manual modes. 3. Steering was achieved by turning the steering motor against the sensed direction. Proper steering angles for correcting travel direction were determined as 5 and 9 degrees when sensing cultivation beds and plants, respectively.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2014년도 추계 학술논문 발표대회
• /
• pp.220-221
• /
• 2014

Recently It has been required the research for the load of transport of the unit module to secure the safety of the transport locking device. So the purpose of this study is to analyze the probability distribution of the load of transport of unit modular when transporting unit modular by vehicle.