• 한국정보디스플레이학회:학술대회논문집
• /
• 2002.08a
• /
• pp.137-140
• /
• 2002

The frequency response analysis of complex impedance spectra using small perturbation ac impedance spectroscopy is an informative method of OLED performance characterization and lifetime analysis. Using simple RC equivalent circuit mode,l macroscopic nonliniear transport properties of semiconductive emission/transport layers can be analyzed and parameterized. We present the bias voltage dependence and aging effect in impedance spectra measured from an ITO/CuPC/TPD/$Alq_3$/LiF/Al OLED device, and discuss possible failure mechanism based on impedance model parameters.

• International Journal of Precision Engineering and Manufacturing
• /
• v.9 no.2
• /
• pp.3-7
• /
• 2008

Vibratory conveyors are widely used in industry to transport granular materials and products. A theoretical point mass model for vibratory conveying was studied. The results agreed well with experimental observations. The model theory included the resting, sliding and flight states of the material. Each state was considered separately when determining the equations of motion. For the coefficients of restitution, values of zero for the normal component and 0.8 for the tangential component were found to be appropriate for modeling the collisions of the granular particles with the conveying surface. The vibration angle had a large influence on the mode and rate of transport. There was an optimum vibration angle for a given set of conditions. The optimum vibration angle decreased and was better defined as the coefficient of friction increased. The results suggest the existence of an optimum dimensionless track acceleration (throw number), which does not support general industrial practice in which the track acceleration is limited when the feed cycle becomes erratic and unstable.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.23 no.9A
• /
• pp.2282-2288
• /
• 1998

ATM techniques ar ewidely accepted as a key transport mechanism infiber-based broadband network. However, to keep pace with the rpid emerging wireless high speed market, it is desirable to verify the reliability & daptability of ATM protocol on high error environment. This paper investigates the various ATM cell transfer characteristics over air interface. Though simulation, we analyze their usabilities of HeC mechanism and single-bit error correction algorithm based on ITU-T recommendation. We propose some methods for cell transport improvement over errored environment and investigate their performance for suggested schemes.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.8 no.3
• /
• pp.83-90
• /
• 2009

This paper presents the design and measurement of a flight model for a Ku-Band Linearized Channel Amplifier. All MMICs, Variable Gain Amplifier (VGA), Variable Voltage Attenuator ('.IVA), Branch line Coupler and Detector for Pre-distorter are fabricated using a Thin-Film Hybrid process. The performance of the fabricated module is verified through the radio frequency circuit simulation tool and electrical function test in space environment.

• Journal of Korean Port Research
• /
• v.15 no.1
• /
• pp.19-26
• /
• 2001

The purpose of this study is to improve the strategies for transportation systems of container cargoes in Busan port. Therefore, container cargoes forecasting is done through logistic methods based on past trends. In 2011, container cargoes demand was forecasted 8.791 million TEU(T/S including 12.559 million TEU). In order to improve transportation systems of container cargoes, the conclusions of this study can be summarized as follows ; \circled1 port facilities expansion, \circled2 diversity of container transport modes, \circled3 make up ICD and exclusive container roads, \circled4 the second Seoul-Busan Expressway.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08a
• /
• pp.571-573
• /
• 2007

It is known that the main source of the area image sticking is the ion charge adsorption on the alignment layer. We found out that the adsorption of the ion charge of the liquid crystal in the cell was physisorption, which takes place between all molecules on any surface providing the adsorption force is small.

• Journal of Mechanical Science and Technology
• /
• v.20 no.8
• /
• pp.1309-1320
• /
• 2006

The linear instability of reacting shear flow is analyzed with special emphasis on the effects of the heat release and variable transport properties. Both analytic profiles and laminar solutions of the boundary-layer equations are used as base flows. The growth rates of the instabilities are sensitive to the laminar profiles, differing by more than a factor of 2 according to which profile is used. Thus, it is important to base the analysis on accurate laminar profiles. Accounting for variable transport properties also changes the mean profiles considerably, and so including them in the computation of the laminar profiles is equally important. At larger heat release, two modes that are stronger in the outer part of the shear layer have the highest growth rates; they also have shorter wavelengths than the center mode.

• Weed & Turfgrass Science
• /
• v.3 no.3
• /
• pp.165-173
• /
• 2014

This review study was conducted to recommend the effective use of herbicide mixtures in Korea. The herbicide ingredients by Herbicide Resistancce Action Committee (HRAC) was classified into 23 groupes according to the mode of action (acetyl CoA carboxylase inhibitors, acetolactate synthase, photosystem I and II inhibitors, protoporphyrinogen oxidase inhibitors, carotenoid biosynthesis inhibitors, enolpyruvyl shikimate-3-phosphate synthase inhibitors, glutamine synthetase inhibitors, dihydropteroate synthetase inhibitors, mitosis inhibitors, cellulose inhibitors, oxidative phosphorylation uncouplers, fatty acid and lipid biosynthesis inhibitors, synthetic auxins, auxin transport inhibitors and potential nucleic acid inhibitors or non-descript mode of action). The rice herbicide mixtures registered in Korea were classified based on the guideline of HRAC. Accordingly, such a classification system for resistance management can help to avoid continuous use of the herbicide having the same mode of action in the same field.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.18 no.2
• /
• pp.44-57
• /
• 2019

It is crucial to understand how people make decisions on mode choice and to accurately predict their behaviors in transportation planning. One of avenues for advancing modeling is, in particular, taking into account for taste heterogeneity in modeling that can incorporate different decision-making processes across group. In this study, we hypothesize that how people make decisions on mode choice would differ by destination in that land use characteristics are heterogeneous by zone even if zones are all in the same area. To this end, we apply Latent Class Modeling (LCM) to commute trips in Seoul by using 2010 household travel diary survey, investigate types of latent classes with the aid of characteristics of destination, and analyze how those classes differently response to factors. The LCM identifies two classes: in the first one, modal split of auto and public transit (bus and metro) is almost half-and-half and the trip destinations are characterized by relatively more residence facilities and less business/commercial facilities; in the second one, public transit has a notably high share and trip destinations are characterized by relatively more business/commercial facilities. In addition, it turns out that demographic and socio-economic variables affect mode choice differently by class.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.31 no.6
• /
• pp.434-449
• /
• 2019

In this study, we develop a new cross-shore sediment module which takes the effect of infra-gravity waves of bound mode, and boundary layer streaming on the sediment transport into account besides the well-known asymmetry and under-tow. In doing so, the effect of individual random waves occurring during the unit observation period of 1 hr on sediment transport is also fully taken into account. To demonstrate how the individual random waves would affect the sediment transport, we numerically simulate the non-linear shoaling process of random wavers over the beach of uniform slope. Numerical results show that with the consistent frequency Boussinesq Eq. the application of which is lately extended to surf zone, we could simulate the saw-tooth profile observed without exception over the surf zone, infra-gravity waves of bound mode, and boundary-layer streaming accurately enough. It is also shown that when yearly highest random waves are modeled by the equivalent nonlinear uniform waves, the maximum cross-shore transport rate well exceeds the one where the randomness is fully taken into account as much as three times. Besides, in order to optimize the free parameter K involved in the long-shore sediment module, we carry out the numerical simulation to trace the yearly shoreline change of Mang-Bang beach from 2017.4.26 to 2018.4.20 as well, and proceeds to optimize the K by comparing the traced shoreline change with the measured one. Numerical results show that the optimized K for Mang-Bang beach would be 0.17. With K = 0.17, via yearly grand circulation process comprising severe erosion by consecutively occurring yearly highest waves at the end of October, and gradual recovery over the winter and spring by swell, the advance of shore-line at the northern and southern ends of Mang-Bang beach by 18 m, and the retreat of shore-line by 2.4 m at the middle of Mang-Bang beach can be successfully duplicated in the numerical simulation.