• Proceedings of the KIEE Conference
• /
• 1999.11c
• /
• pp.803-806
• /
• 1999

고성능 시스템이 개발됨에 따라 실시간 테스트의 중요성이 증가하고 있다. 메모리의 경우 저장된 값을 보존하면서 테스트할 수 있는 Transparent 테스트 알고리듬들이 개발되고 있다. 본 논문에서는 테스트 시간과 오버 헤드를 줄일 수 있는 새로운 Transparent 테스트 알고리듬을 제안한다. 제안하는 알고리듬은 SRAM의 전이 쓰기 동작 중에 발생하는 동적 전원 전류를 이용하는 방법이다. 동적 전원전류와 고장 모델과의 상관 관계를 규명한 결과 기존의 알고리듬보다 많은 고장 모델들을 테스트 할 수 있음을 발견하였다. 또한 쓰기 동작 중의 전류를 감지하기 때문에 압축치를 생성할 필요가 없어 그에 따른 테스트 시간과 오버 헤드를 줄일 수 있다. 본 논문에서는 기존의 March 알고리듬들을 본 테스트 방법론에 적합하도록 변형하는 방법을 설명하고 기존의 transparent 알고리듬과의 테스트 시간 고장 검출률 그리고 BIST 구현시의 하드웨어 오버헤드 측면에서 비교를 한다.

• The Journal of the Acoustical Society of Korea
• /
• v.19 no.8
• /
• pp.68-77
• /
• 2000

Line special frequency (LSF) parameters have been widely used in low bit-rate speech coding due to their efficiency for representing the short-time speech spectrum. In this paper, a new distance measure based on the masking properties of human ear is proposed for quantizing LSF parameters whereas most conventional quantization methods are based on the weighted Euclidean distance measure. The proposed method derives the perceptual distance measure from the definition of noise-to-mask ratio (NMR) which has high correspondence with the actual distortion received in the human ear and uses it for quantizing LSF parameters. In addition, we propose an adaptive bit allocation scheme, which allocates minimal bits to LSF parameters maintaining the perceptual transparency of given speech frame for reducing the average bit-rates. For the performance evaluation, we has shown the ratio of perceptually transparent frames and the corresponding average bit-rates for the conventional and proposed methods. By jointly combining the proposed distance measure and adaptive bit allocation scheme, the proposed system requires only 770 bps for obtaining 95.5% perceptually transparent frames, while the conventional systems produce 89.9% at even 1800 bps.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2015.11a
• /
• pp.294-294
• /
• 2015

대향타겟식 스퍼터링법을 이용해 유연한 기판에 증착시켜 고주파 마그네트론 스퍼터링보다 덜 손상이 입히도록 증착 시켰으며, 플라즈마 주파수를 다양하게 하여 밴딩테스트 후 나빠지는 전기적, 광학적 특성을 개선하고, 그 원인을 분석하였다.

• Journal of Industrial Convergence
• /
• v.21 no.8
• /
• pp.35-42
• /
• 2023

Recently, electronic devices with bendable electronic devices based on flexible substrates are being sold, and therefore, the purpose of this study is to evaluate the possibility of flexible substrates of conductive transparent tapes. As a transparent electrode, carbon nanotube (CNT) was formed by the coating method developed by the research team, and samples coated up to 5 times were fabricated. The surface resistance and transmittance of the substrate were measured, and both resistance and transmittance decreased as the number of CNT coatings increased. After the tape was detached from the glass, the surface resistance slightly increased in all samples, and the transmittance increased by about 10% in all measured wavelength ranges because the glass was removed. Next, the tape coated with CNT twice was used to a bending test 20,000 times under the condition of a radius of curvature of 2 mm. The electrical and optical properties before and after bending did not change, which means that there was no change in CNT properties due to bending.

• Journal of KIISE:Software and Applications
• /
• v.35 no.4
• /
• pp.245-254
• /
• 2008

This paper proposes a unified multi-modal input framework to interface the recognition engines such as IBM ViaVoice and Microsoft handwriting-recognition system with general window applications, particularly, for pen-input displays. As soon as user pushes a hardware button attached to the pin-input display with one hand, the current window of focus such as a internet search window and a word processor is overlaid with a transparent window covering the whole desktop; upon which user inputs handwriting with the other hand, without losing the focus of attention on working context. As well as freeform handwriting on this transparent input overlay as a sketch pad, the user can dictate some words and draw diagrams to communicate with the system.

• Journal of the Microelectronics and Packaging Society
• /
• v.25 no.2
• /
• pp.31-34
• /
• 2018

In this study, the feasibility of ZnO/Al/ZnO flexible transparent electrodes for future flexible optoelectronic devices was investigated. All depositions were performed on PET substrates. The thicknesses of the top and bottom ZnO layers were 5-70 nm and 2.5-20 nm, respectively. The highest visible light transmittance was recorded when the thicknesses of the top and bottom ZnO layers 30 nm and 2.5 nm, respectively. 62% optical transmittance (at the wavelength of 400 nm) and sheet resistance of $19{\Omega}/{\Box}$ were measured. After repetitive bending test at a curvature radius of 5 mm, the transmittance and sheet resistance did not change.

• The KIPS Transactions:PartC
• /
• v.8C no.6
• /
• pp.783-792
• /
• 2001

It is well known that, in the near future, the lifetime of the IPv4 address space will be limited and available 32-bit IP network addresses will not be left any more. In order to solve such IPv4 address space problem in an effective way, the transition to the new version using IPv6 architecture is inevitably required. At present, it is impossible to convert IPv4 into IPv6 at a time, since the coverage and the size of today's Internet is too huge. Therefore, the coexistence of both IPv4 and IPv6 must be arranged in a special and practical fashion for rapid conversion on the whole. IP protocol translation has been proposed to ease the translation of the Internet from IPv4 to IPv6. This paper presents the design and implementation of a transparent transition service that translates packet header as they cross between IPv4 and IPv6 networks. IPv4/IPv6 Translation Protocol is written in c source code and is tested by the local test recommended by ISO, which has the most excellent error detection function. The test was processed with a test scenario and it was found that the results were successful.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.414-414
• /
• 2012

차세대 플렉시블 디스플레이 소재로서, 탄소나노뷰브(CNT) 기반의 투명전도막은 기존의 ITO 박막보다 우수한 유연성을 갖기 때문에 많은 관심을 모으고 있다. 특히 낮은 저항과 투과도를 유지하면서 투명 전도막의 내구성을 향상시키는 연구는 상업화에 가장 필요한 연구 분야이다. 본 연구에서는 다층벽 탄소나노튜브(MWCNT)를 이용하여 제작된 투명 전도막의 내구성을 개선하기 위하여 오버 코팅을 통한 물성 개선을 연구하였다. 투명전도막은 PET기판 위에 스프레이 방식을 이용하여 균일하게 코팅하였다. 오버 코팅 물질로는 실리콘계 유무기하이브리드 투명하드 코팅을 적용하였다. 연구결과 오버 코팅층과 CNT 코팅층과의 젖음성이 물성 향상에 가장 많은 영향을 끼치는 것을 관찰하였고, 특히 젖음성이 증가할수록 투과도와 전기전도도가 향상되는 것을 확인하였다. 또한 고온 고습 환경에서 240시간 이상 내구성 테스트 결과, 저항률 변화가 1.1 이하인 것을 확인하였다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.24-24
• /
• 2009

투명전극 (TCO Transparent Conductive Oxide)은 Solar cell, Touch panel, Sensor 등 많은 분야에 이용되어지고 있다. ZnO 그리고 $SnO_2$는 ITO룰 대체하기 위하여 오래전부터 연구가 되어지고 있다. 하지만 ZnO가 가지고 있는 많은 장점에도 불구하고 ITO를 대체하기 위한 전기적 특성이 충분하지 않다. 따라서 ZnO에 Al를 도핑하는 등 다양한 연구가 진행되어왔다. 본 실험은 우수한 광학특성 및 전기적 (10-5) 특성을 확보하기 위하여 AZO/Ag/AZO 다층박막구조 형성하였다. 또한 염료감응 태양전지에 적용하기 위하여 다층박막구조를 이용한 안정성 테스트를 진행하였다.

• Clean Technology
• /
• v.23 no.2
• /
• pp.133-139
• /
• 2017

Bio-based plastics containing the biomass content higher than 25 wt% have been considered as environment-friendly materials due to their effects on the reduction in the $CO_2$ emission and petroleum consumption as well as biodegradability after use. In this study, poly vinyl chloride, plant-derived plasticizers, by adding a biodegradable catalyst was observed a change in the biodegradability and physical properties. To produce the oxidative decomposition transparent bio film, which is broken down in the initial percent elongation and physical properties such as tensile strength, it was to test the safety of the product as a food packaging material. Poly vinyl chloride, primary plasticizer, secondary plasticizer, anti fogging agent, the combined stabilizer were mixed in a high speed mixer, then extruded using an extrusion molding machine, after cooling, winding, to produce a oxidative decomposition transparent bio film and the control film, with a thickness of $12{\mu}m$ through winder role. Mechanical properties tensile strength, elongation, and the maximum load elongation and biodegradation test. Transparent bio film produced by biodegradation catalyst is compared with the control film. Tensile strength and elongation of films were found to be no significant difference. Further, as a result of the biodegradation test for 45 days based on the ASTM D6954-04 method, biodegrability of film is 61.4%.