• International Journal of Aeronautical and Space Sciences
• /
• 제7권2호
• /
• pp.121-127
• /
• 2006

An analysis procedure for the combined problem of control algorithm and aeroelastic system which is based on the computational fluid dynamics(CFD) technique has been developed. The aerodynamic forces in the transonic region are calculated from the transonic small disturbance(TSD) theory. An linear quadratic regulator(LQR) controller is designed to suppress the transonic flutter. The optimal control gain is estimated by solving the discrete-time Riccati equation. The system identification technique rebuilds the CFD-based aeroelstic system in order to form an adequate system matrix which involved in the discrete-time Riccati equation. Finally the controller, that is constructed on the basis of system identification technique, is used to suppress the flutter phenomenon of the airfoil with attached store. This approach, that is, the CFD-based aeroservoelasticity design, can be utilized for the development of effective flutter controller design in the transonic region.

• 한국항공우주학회지
• /
• 제38권11호
• /
• pp.1075-1080
• /
• 2010

마찰 감쇠가 있는 공탄성 해석을 위하여, 연계 시간 적분법을 사용하여 아음속/천음속 영역에서 공탄성 응답을 구하였다. 양력면에 발생하는 충격파에 의한 공기역학적 비선형성을 고려하기 위하여 동위상 주기 경계 조건이 적용된 미소교란 방정식을 비정상 공기력 계산에 적용하였다. 변위 종속적인 마찰 감쇠기가 있는 2차원 에어포일 시스템에 대하여 플러터 경계에 대한 수직력의 기울기와 마하수의 영향을 살펴보았다.

• 한국소음진동공학회논문집
• /
• 제12권11호
• /
• pp.864-872
• /
• 2002

In this study, the effect of planform curvature on the stability of coupled flow/structure vibration is examined in transonic and supersonic flow regions. The aeroelastic analysis for the frequency and time domain is performed to obtain the flutter solution. The doublet lattice method(DLM) in subsonic flow is used to calculate unsteady aerodynamics in the frequency domain. For all speed range, the time domain nonlinear unsteady transonic small disturbance code has been incorporated into the coupled-time integration aeroelastic analysis (CTIA). Two curved wings with experimental data have been considered in this paper MSC/NASTRAN is used for natural free vibration analyses of wing models. Predicted flutter dynamic pressures and frequencies are compared with experimental data in subsonic and transonic flow regions.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.1604-1610
• /
• 2004

A steady dilute premixed combustion at transonic speeds in a diverging channel is investigated. The model explores the nonlinear interactions between the near-sonic speed of the flow, the small changes in geometry from a straight channel, and the small heat release due to the one-step first-order Arrhenius chemical reaction. The reactive flow can be described by a nonhomogeneous transonic small-disturbance (TSD) equation coupled with an ordinary differencial equation for the calculation of the reactant mass fraction in the combustible gas. The asymptotic analysis results in the similarity parameters that govern the reacting flow problem. The model is used to study transonic combustion at various amounts of incoming, reactant mass, reaction rates, and channel geometries.

• 항공우주시스템공학회지
• /
• 제17권6호
• /
• pp.82-93
• /
• 2023

본 논문에서는 층간분리 현상을 고려한 복합재 미사일 핀의 비선형 천음속 플러터 해석을 수행하였다. 층간분리 효과를 고려한 유한요소 진동해석 기법은 시험 결과와 비교 및 검증하였다. 비선형 천음속 플러터 해석은 자체 개발한 천음속 미소교란 방정식 기반의 시간영역 플러터 해석 프로그램을 개선하여 복합재 날개의 층간분리 효과까지 고려할 수 있도록 확장하여 활용하였다. 복합재 미사일 핀 모델에 대해 층간분리 영역에 따른 아음속, 천음속 및 초음속 플러터 해석을 수행하고 층간분리 영향에 따른 공력탄성학적 특성을 고찰하였다.

• International Journal of Aeronautical and Space Sciences
• /
• 제9권2호
• /
• pp.34-40
• /
• 2008

The aeroelastic analyses for several wing models were performed using the transonic small-disturbance (TSD) equation, which is very efficient, to consider the aerodynamic nonlinearities in the transonic region. For more accurate aerodynamic analysis of airfoil and wing models with shock waves, the viscous equations based on the Green's lag-entrainment equation of boundary-layer effects were coupled with the TSD equation in the transonic region. Finally the aeroelastic characteristics of wing models were investigated through comparisons of the aeroelastic analysis results for wing models considering the change of a thickness of the airfoil section. Moreover, the results of the aeroelastic analysis using the coupled TSD equation with the viscous equations were compared with those using the TSD equation for several wing models.

• 한국항공우주학회지
• /
• 제33권8호
• /
• pp.75-83
• /
• 2005

확대형 채널 내의 정상 천음속 희박 예혼합 연소에 대해 점근해석을 이용하여 연구하였다. 이 모델은 근음속의 유동 속도와 일직선 채널로부터 벗어난 작은 형상변화 그리고 1단 1차 Arrhenius 화학 반응율에 의한 적은 열 방출 사이에서 일어나는 비선형 상호작용에 대하여 탐구하였다. 반응유체 유동은 연소 가스의 질량 분율을 계산하는 상미분 방정식과 연계된 비균질 천음속 미교란 방정식(TSD)을 사용하여 묘사하였다. 또한 점근해석으로부터 반응유체 유동 문제를 지배하는 상사 파라미터들을 유도하였다. 수치 결과들은 대류와 화학반응 그리고 형상효과 사이에 일어나는 복잡한 비선형 상호작용과 유동에 미치는 이것의 영향 등이 잘 나타나 있다.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.295-300
• /
• 2005

The freeplay, one of the concentrated structural nonlinearities, is inevitable for control surfaces of a real air vehicle due to normal wear of components and manufacturing mismatches. Also aerodynamic nonlinearities caused by a shock wave occur in transonic region. In practice, these nonlinearities induce the limit cycle oscillation (LCO) and decrease the transonic flutter speed. In this study, the fictitious mass method is used to apply a modal approach to nonlinear structural models due to freeplay. The transonic small-disturbance (TSD) equation is used to calculate unsteady aerodynamic forces in transonic region. Nonlinear aeroelastic time responses are predicted by the coupled time integration method (CTIM). This method was also applied to a 3D all-movable control wing to investigate its nonlinear aeroelastic responses. The angle of attack effect on the LCO characteristics has been found to be closely related with the initial pitching moment.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2000년도 춘계학술발표대회 논문집
• /
• pp.126-130
• /
• 2000

In this study, flutter characteristics of a composite wing have been studied for the variation of laminate angles in the subsonic, transonic and supersonic flow regime. The laminate angles are selected by the aspect of engineering practice such as 0, $\pm$45 and 90 degrees. To calculate the unsteady aerodynamics for flutter analysis, the Doublet Lattice Method(DLM) in subsonic flow and the Doublet Point Method(DPM) in supersonic flow are applied in the frequency domain. In transonic flow, transonic small disturbance(TSD) code is used to calculate the nonlinear unsteady aerodynamics in the time domain. Aeroelastic governing equation has been solved by v-g method in the frequency domain and also by Coupled Time-Integration Method(CTIM) in the time domain. from the results of present study, characteristics of free vibration responses and aeroelastic instabilities of a composite wing are presented for the set of various lamination angles in the all flow range.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 춘계학술대회논문집
• /
• pp.1198-1203
• /
• 2000

In this study, a nonlinear aeroelastic analysis system for the fighter wing with tip-store has been developed additionally in the transonic and supersonic flow region. The unsteady CFD code based on the transonic small disturbance theory has been incorporated to consider the numerical capability for the aerodynamic nonlinear effects. The coupled time-integration method is used to observe the detailed nonlinear aeroelastic responses for elastic wings in their flight. condition. A conservative wing-box model of a fighter wing with tip-store is modeled by MSC/PATRAN and the corresponding free vibration analysis has been performed by MSC/NASTRAN. The results of flutter analyses are presented in the subsonic, transonic and supersonic flow regime.